I just love how this looks, great job! The only thing is there was such an echo while talking in the garage, maybe next time go outside the garage? Just sayin. Love the finished product, excellent job!
Ya had me at creating a profile. Most don't even know the microfractures are 100% needed. No epoxy in the expansion joints. 100% correct. Great video. Only complaint....You should have touched base on the cleaning process.
Hello! I just built my first home which has a standard 2 car garage. (Not sure if they are bigger in America) Can you please tell me how many litres of paint I will need? Also how many pounds of flake for the same ratio you applied it. Thankyou
I'm a little torn. In terms of prep and execution you guys did a great job. But the perceived mil thickness of this seems pretty lean, and with all those windows no poly topcoat to prevent yellowing seems pretty questionable.
Wish you all could come to Taylorsville, KY. I need someone to do my epoxy floor and countertops but can’t find anyone around here with this kind of quality.
Would you guys please do a garage sized floor using silver as a base coat and titanium and the new liquid diamonds as the highlights. Thanks I’d love to see those colors together . I’m looking forward to using those colors in my two car garage. Finished with a high gloss👍🏼
You can order a sample kit from the link below and request these colors by emailing leggari@gmail.com and they will put them in the sample kit for you.
Hi, me and my mom are trying to correct a guy who did ours without a seal (epoxy) and with no a lot of flakes. Any advice on how to start, there is already Keheils and little flakes but they keep rising... any dupes as well for epoxy from Home Depot or such?
We have 3 different top coat options. Glaze coat is our super high gloss top coat that lays out glass smooth just like the metallic epoxy coat. Our WB Urethane comes in high gloss and leaves a minor texture and we also have a WB Urethane that’s a Matte/Satin finish. Our urethane top coat are UV stable.
The price of the Leggari products really floored me. A two car garage at 500 sq ft was going to cost me close to $3000. The estimates I got for contractors to do the whole thing were between $3300 and $3700. I wonder what products the contractors were using. I suppose if the contractor was going to use the Leggari products the estimates would have been more like $5000 ??
Good to see coating install using proper prep. Unless you have extremely soft concrete, drop the wb epoxy since it's a weaker pull test vs 100% solids. Invest the money into a polyaspartic top coat since that epoxy will yellow.
You can actually order or price out a custom kit for that exact square footage through the Floors section of our website at www.leggari.com. Simply click on Floors >>>> Order Floor Kit Here then the link order floor kit, then follow the steps.
I had this same paint color done in my garage..... after three failed attempts I had to give up....there were so many clumps and bumps after these paint....do you recommend anyone good in Austin area?
How many lbs of paint chip per 100 square foot to get a floor like that? Also how many top coats did you put on? FYI you keep telling people to go to your website for the kits, however you do not have this type kit of the site at all.
You can email leggari@gmail.com and they can assist you. Depends on the floor but usually you do 1 lb. of flakes for 6 sq. ft. and you can do either one ore two urethane top coats over the surface.
You can actually order or price out a custom kit for that exact square footage through the Floors section of our website at www.leggari.com. Simply click on Floors >>>> Order Floor Kit Here then the link order floor kit, then follow the steps.
Its wayyyyy too much money. Dont buy this crap! I just checked for 850sqft and the total for everything they put in my cart was 9ver $2300 bucks! Screw that! Nice floor, but ain't worth $2k
I put on 'rock solid floors' Polycuramine which is 20 times stronger than epoxy, five years later my shop garage floors look as new. My buddy put in the epoxy and one year later tire marks and some flaking discolouring. Its not fun either way but do the research. Epoxy is an easy one man show. I did rock solid by myself, I needed help more than once, mixing and laying it down. Just FYI.
You can actually order or price out a custom kit for that exact square footage through the Floors section of our website at www.leggari.com. Simply click on Floors >>>> Order Floor Kit Here then the link order floor kit, then follow the steps.
So awesome, I love watching your videos they are so inspiring to me. Very cool. Merry Christmas 🎄
Thanks Naptime and Merry Christmas to you.
@@LeggariProducts 🎄🎄🎄🎄🎄
That floor came out awesome.. great work..
Thanks Christopher for the comment and for watching the video
The comments are just as good as the video! Awesome job!
Excelente trabajo mi amigo
Looking good keep up Good work God blessed y'all.
Thanks Pamela for the comment and we sure will keep post more fun videos.
I just love how this looks, great job! The only thing is there was such an echo while talking in the garage, maybe next time go outside the garage? Just sayin. Love the finished product, excellent job!
Ya had me at creating a profile. Most don't even know the microfractures are 100% needed. No epoxy in the expansion joints. 100% correct. Great video. Only complaint....You should have touched base on the cleaning process.
What is the cleaning process?
Very cool looking
Thanks so much for this video it helped me out alot
Thanks for watching glad it helped!
Your are THE BEST !!!!!!!
how do you pick the flakes you scrape off? what do you do with them?
Nice Work
That shotblaster is ancient as heck ! Just goes to show you how long these machines last.
They sure do last a long time. Thanks for watching the video
Looks great!!...Do you guys use a top coat over the Epoxy to keep it from Ambering?
Amazing yes plz
This is like ASMR
Great ty !
Good job.
Hi, take a look at our online brochure. Thanks
online.flippingbook.com/view/364043
Hello! I just built my first home which has a standard 2 car garage. (Not sure if they are bigger in America) Can you please tell me how many litres of paint I will need? Also how many pounds of flake for the same ratio you applied it.
Thankyou
Do you used two top coat or one? And which top coat did you used polyurethane or clear top coat?
I'm a little torn. In terms of prep and execution you guys did a great job. But the perceived mil thickness of this seems pretty lean, and with all those windows no poly topcoat to prevent yellowing seems pretty questionable.
Do you all use a clear urethane coat after the second round of epoxy?
Beautiful results
Hi, take a look at our online brochure. Thanks
online.flippingbook.com/view/364043
I went to your website to find this exact kit however I was unable to find it. All I seemed to come across were your metallic kits
same
Wish you all could come to Taylorsville, KY. I need someone to do my epoxy floor and countertops but can’t find anyone around here with this kind of quality.
quality is a thing which depends mostly on the price you want to pay for.
My company should be able to help you out. Located in Lexington. Garage Solutions Central Kentucky.
Badass.... gorgeous!
Would you guys please do a garage sized floor using silver as a base coat and titanium and the new liquid diamonds as the highlights. Thanks I’d love to see those colors together . I’m looking forward to using those colors in my two car garage. Finished with a high gloss👍🏼
You can order a sample kit from the link below and request these colors by emailing leggari@gmail.com and they will put them in the sample kit for you.
Some people when they get rich want an island to their own, some want a yacht to sail the world, give me big garage, and epoxy floor and a car lift.
Same here!
Amen!
And a mini fridge for the brewskys🤘🏻🤘🏻
@@ReadMyDiscription.223 wait, mini?
Lol
Make mine a full size fridge!
Did you put a poly coat on top? Or add uv to the epoxy kits? Or is your uv protected?Just curious of the durability of your epoxy.
can i apply epoxy coat before construction garage just on garage pad
So doesn't matter if u walk when u applying the finish coat???
Do you recommend stopping where garage door lands or is it ok to do the lip that is exposed to the outside?
Do the apron.
best！
I want to learn how make epoxy especially on concrete floor
We have live training classes at our facility.
online.flippingbook.com/view/854316/
Where are you guys located at? I would love for you guys to do my garage, you make it look so easy!
They are located in Washington state
My mom and I want to do out garage so bad. We have so much paint splatter on it.
Can you do 2 coats of top coat or only 1 is good?
Can this job be done in a pool for waterproofing?
Such an impressive floor! Makes the cheap, big-box store epoxy kits look so inferior.
Thanks for the comment and for watching the video
Great video. Thank you so much. Can you use the wood chips with concrete or floor paint? I can’t find anything on that
NO, it is designed to work with leggari epoxy!
Wow
It's very cool my question is where can I buy the product? please
COMING 2025 "LEGGARI" SPORTS CAR!!!
That would be nice, thanks for watching the video Matt.
You don't do anything to get rid of the orange peel haze effect such as polishing it?
You wont see any of that with a full broadcast
tried to find the flake system in the side but only see the metallic.
Can this epoxy coating apply to car garage? Does it has Weight limitations (vehicles)?
How many bags of flakes did you use to cover a two car garage?
Pretty cool. You may need to use a wireless Mic. 😁
600 amp service....nice!
Thanks for watching the video
*Estimate* for ~450sqft same exact thing. 4yr old slab well kept??? VA
Where are you guys located? You do AWSOME work
Hi what brand do you use for your project thanks
Are you guys wearing some type of shoes with cleats? How can you walk on the floor and not get stuck to it? Thanks in advance.
Ernesto Caamano those are just spiked shoes like cleats they have spikes so you won’t ruin the epoxy, you can get them on amazon for like 20 bucks
@@chuanpham542 they're baseball cleats
Hi, me and my mom are trying to correct a guy who did ours without a seal (epoxy) and with no a lot of flakes. Any advice on how to start, there is already Keheils and little flakes but they keep rising... any dupes as well for epoxy from Home Depot or such?
You can contact our techs at 844-534-4274 ext. 1 and they can assist you.
In the background at 06:00 there's a giant paint shield. Did you use that for anything?
Being poor, can I use Industrial oil based enamel and then use the colored chips one gets w/the epoxy kit?
Can we do the drive way
Nice work. Do you always use epoxy top coat? Ever had any issues with yellowing?
We have 3 different top coat options. Glaze coat is our super high gloss top coat that lays out glass smooth just like the metallic epoxy coat. Our WB Urethane comes in high gloss and leaves a minor texture and we also have a WB Urethane that’s a Matte/Satin finish. Our urethane top coat are UV stable.
What color or name of flakes did you use? Nightfall?
I like what it looks like rock, what's the name and were do they sell it
This is our own leggari brand epoxy floors. We sell the product on our website at leggari.com
Are you wearing normal football cleats? Or something special to not mess up the coating
What epoxy are you using?
The price of the Leggari products really floored me. A two car garage at 500 sq ft was going to cost me close to $3000. The estimates I got for contractors to do the whole thing were between $3300 and $3700. I wonder what products the contractors were using. I suppose if the contractor was going to use the Leggari products the estimates would have been more like $5000 ??
You can buy the same products legarri has at local building supply stores for 1000$ leas
Looks great Guys , in 2020 please invest on a wireless microphone!!!
We just did, so this will help the videos tremendously. Thanks for watching
This flake you can do it around a pool??
What kind of primer did you use?
Our Leggari primer is a water based epoxy specifically designed to chemically bond to almost all smooth surfaces.
I think i found the one I want to do!!
Dom, you can email leggari@gmail.com and let them know what you want and they can assist you.
Are we supposed to have that much extra flakes?
Good to see coating install using proper prep. Unless you have extremely soft concrete, drop the wb epoxy since it's a weaker pull test vs 100% solids. Invest the money into a polyaspartic top coat since that epoxy will yellow.
We have a poly aspartic epoxy that is available on our new website in about a month. Thanks for watching the video
I want to do my garage floor with a sort of blue and white mix so it looks like clouds on a blue sky.
Check out our flake floor kit options here! 👉 leggari.com/order-flooring/#flake-floor-kits
You put concrete paint first, and second step the epoxy and third step the chips???
How many pounds of flakes did you guys use?
Curious as to why you didn't use a promotion adhesive before you put the primer down?
Because our primer will have a hard time adhering to it. Once you grind the concrete and open the pores than our primer will adhere to it.
So if I don't grind my garage floor, i would need to add an adhesive promoter? Thx
👍
Hi, take a look at our online brochure. Thanks
online.flippingbook.com/view/364043
Like how much is the cost for 2 car garage ?
You can actually order or price out a custom kit for that exact square footage through the Floors section of our website at www.leggari.com. Simply click on Floors >>>> Order Floor Kit Here then the link order floor kit, then follow the steps.
To walk on the clear coat?
I had this same paint color done in my garage..... after three failed attempts I had to give up....there were so many clumps and bumps after these paint....do you recommend anyone good in Austin area?
i like to see epoxy on stair
You can apply it on top of the stairs but the vertical surfaces are a little harder to apply because the epoxy will just run. But you can do it.
How many lbs of paint chip per 100 square foot to get a floor like that? Also how many top coats did you put on? FYI you keep telling people to go to your website for the kits, however you do not have this type kit of the site at all.
You can email leggari@gmail.com and they can assist you. Depends on the floor but usually you do 1 lb. of flakes for 6 sq. ft. and you can do either one ore two urethane top coats over the surface.
What kind of sneakers are you guys wearing?
Can this be done on vertical walls?
Yes
Peep the solaredge inverter on the wall.
Hm it disappeared. Or was this two houses?
Hi, take a look at our online brochure. Thanks
online.flippingbook.com/view/364043
Nice floor!! Why do you wear cleats? Wouldn’t there be cleat marks? Just curious about that :)
You wear cleats so you don't leave shoe prints. The epoxy is typically self leveling, meaning it'll fill in the spots from the spikes.
I was searching for this question when I noticed the cleats 🙂
Only 1 coat of clear?
No shots of the finished project?
the final shots start at 11:25!
@@LeggariProducts i was talking about after the floor dried and cured.
are those football shoes?
Close, baseball cleats, the skinny metal kind. Football cleats don’t work very well. Thanks
Are your products available in Uganda East Africa
You can email leggari@gmail.com and they can assist you.
To do 900 sq ft how much epoxy do I need?
You can actually order or price out a custom kit for that exact square footage through the Floors section of our website at www.leggari.com. Simply click on Floors >>>> Order Floor Kit Here then the link order floor kit, then follow the steps.
Its wayyyyy too much money. Dont buy this crap! I just checked for 850sqft and the total for everything they put in my cart was 9ver $2300 bucks! Screw that! Nice floor, but ain't worth $2k
@@thanasispapakiriakos7579 it is super expensive.
Sounds like you may need to get a wireless mic ;P
We just got one about a month ago and are using it on all the new videos.
Good info, but you need to invest on a lapel mic, and cut off the music, with the low voice and the music gets distracting. but good info.
i wonder if this would work with a pool i mean they have pool epoxy......
This product is not for pools, it is for indoor use only.
@@LeggariProducts right it would be awesome if they made flake for ppl who epoxied there pools 👍👍
Was the top coat epoxy or polyaspartic?
This was an epoxy topcoat. However, we now offer Polyaspartic topcoat. Check it out here! leggari.com/product/polyaspartic/
Please invest on microphone. Overall quality product.
I put on 'rock solid floors' Polycuramine which is 20 times stronger than epoxy, five years later my shop garage floors look as new. My buddy put in the epoxy and one year later tire marks and some flaking discolouring. Its not fun either way but do the research. Epoxy is an easy one man show. I did rock solid by myself, I needed help more than once, mixing and laying it down. Just FYI.
Our industrial grade epoxy has stood up the wear and tear over time in many garage floors. Thanks for watching the video
Both those shot blasters are extreme overkill for the project.
how much does it cost to do something like that?
You can actually order or price out a custom kit for that exact square footage through the Floors section of our website at www.leggari.com. Simply click on Floors >>>> Order Floor Kit Here then the link order floor kit, then follow the steps.
What shoes do you use
To walk on the clear coat
Are you guys wearing cleats? or are they shoes made for that line of work. Either way cleats are a great idea!
He is wearing baseball cleats but you can also use spiked shoes.
I want to do the same to my garage. But if I do it my self it won’t look as nice.. lol.
We made the process for DIY'ers through our tutorial videos on our website that show you step by step the process. Thanks
u dindt have 10$ to buy a frikn microphone from amazon?
This was an old video, we have updated our microphones and it is a lot better quality.
Are you guys international?