Inside the Ohlins TTX 40
Вставка
- Опубліковано 27 лип 2024
- Looking at Ohlins TTX40 technology
To skip intro click on this 2:00
"The Ohlins Guy" intro music written and performed by my pal Scarlet Rivera. See Scarlet on Netflix: Rolling Thunder Review: A Bob Dylan Story. See Scarlet on Hurricane video • Bob Dylan - Hurricane ...
theohlinsguy@gmail.com
www.brennershocks.com - Авто та транспорт
Once again, thank you for making these videos and sharing your wealth of knowledge...
Thanks!
All your videos are gold mines. Thanks for posting them, hope you keep doing the technical ones!
Thanks! I'll try
It's good to se you back !
Thanks! Just ran out of stuff to post
Thank you for teaching us!! The new generation of mechanics. Greetings from greece!!
Hi Alexandros. Hope it is interesting. Watching in Greece! I never would have guessed my little videos would get that far!
Thanks so much for the detailed breakdown of shock working principles and the effects of design choices on the functionality etc! Very helpful for me to understand better how a shock works.
Great! That is my mission. It's not rocket science. I leave the rocket science to Elon Musk!
@@theohlinsguy4649Covid Break???... Stay Healthty ...your Spec Knowlege is missed...
Another masterclass!!!
Thanks!
Ohlins Guy, very much looking forward to the upcoming two way adjuster video. We use a lot of low speed on rebound, drag racing with no wheely bar, 1250 hp. TTX 36.
OK Ill get it done......Thanks for watching!
@@theohlinsguy4649 Thank you Sir!
that's another great video! I really enjoy your suspension show.
quick answer to you question to vacuum fill the bladder shock you only need bladder type adapters and you good to go! after filling it just remove the adapter and push the bladder in to the shock body.
Thanks for the info!!
cool intro music . will you film more videos in the coming days? yamaha T 7 dude. thanks
Hey Douglas I love your videos!! Can you please make a video explaining your process for adjusting the low speed clickers for comp and rebound on a race car?
Hi John. I don't use 3 or 4 way adjusters on my car so the adjustments are only bleed adjustments (low speed). I try to keep them as open as possible. If things get better when they are being closed down I go back and revalve so they can be more open again. You have to be careful on any single tube shock with a reservoir compression adjuster. If you start closing down the rebound or compression independent of one another the shock gets out of balance and bad things happen. The TTX technology does not suffer from this. Also the TTXs are not as fussy when you start closing the bleeds. Still better to try to keep them open. Single tube shocks are really good when they are properly pressure balanced.
@@theohlinsguy4649 That is Great information!! Thank You Douglas!!
@@jbl212 Thanks John!!
Any chance you could do a video showing a DFV and comparing it to a shock without one?
Will do
Hello how are you ? I need help with a rear shock absorber on a 2014 KLR650, I am in the middle of Venezuela and no one makes repairs on these parts in this country. Could you help me repair it? Greetings
Appreciate your videos. When are you putting more up?
Thanks!! I am so busy it is hard to get the camera out! I am also running out of things I know about!!
@@theohlinsguy4649 Your knowledge is hard to come by and very much needed and appreciated! Thanks again!
Somehow i havent seen your videos until now, excellent information! Thank you for sharing. Do you sell wear parts to the public or happen to know who would? Thanks
Yes, I would be happy to sell you service parts. I only have Ohlins Thanks for watching and the kind comment!
@@theohlinsguy4649 Hope you are Doing,fine ?stay healthy !Hope See you Soon Back on your Channel...🤙
Hello,
I watched all your videos on UA-cam. It was very informative and a lot new information for me. Thank you for that !!
I assume you also service a lot of motorcycle forks. Could you share your experience regarding chrome tubes polishing? Maybe you are using some kind of special technique like different sand papers, polishing compounds and etc.? And also what do you think about leaving on chrome tubes scratches - something like hone is on engine cylinders ? I didn't found any useful information regarding this topic. There few shop videos about it but not any expert level discussion... Also there are some interesting fork service provider "KREFT" with their microfinish surface technology. You can find some info on KREFT website.
Some just do intensive polishing on the lathe by using scotch brite with polishing paste. Some just uses kitchen steel wool. If interesting I could try to post UA-cam links because UA-cam block comments with links 😒
It could be very interesting information for everyone because it affects all forks and shock absorbers 🙂
Hi ER. Thanks for watching. You are a glutton for punishment!!! Someone just showed me the special microfinishing. I am far from an expert but I just try to give a little crosshatch with scotchbrite, but this would be with a tube with no damage. I don't know if you have Ohlins forks, but if I find a pitted, scratched or rusted fork surface i just replace the tube. Inside Ohlins tubes run in the $230 range. Sorry I can't be more help.
Brenner rules....
That's no what my wife says!
Hi, I have the ttx36 McPherson with a small reservoir on the front and ttx36 ilx in the rear, the small reservoir is usefull ? I had Intrax before and the reservoir was a lot bigger . Is my suspension solid piston design? Is from an BMW M4 Gt4 race car .
Hi. Is that a TTX46 in the front? If so the reservoir serves a much different purpose. The through shaft does not displace any oil so no mechanism for dealing with displaced oil is necessary. All the small reservoir is for is to allow for oil expanded by heat to go. The separator piston in the canister does not move when the shaft moves. In any TTX there is also no need for high pressure in the canister. They are usually set at between 6 and 8 bar because there is no danger of cavitation with that technology. Usually the TTXs have a solid piston. There are pistons available with blow off and high frequency configurations but I rarely see this in the applications I use.
@@theohlinsguy4649 Thank you for the explanaition . It helped a lot . I viewed all videos and I got it after I wathed your tth36 ilx video .
If you do have a TTX46 front the TTX40 video is the one that is similar to your front strut. Sorry it took so long for me to respond@@dacianmuntean
Great video! did you treat your self to a new vacuum bleeder?
Good eyes! Yes. Because I service both Ohlins auto and motorcycle shocks I need to use mostly 2 different oils. The new one has 2 oil tanks so I don't have to drain and refill the tank like I had to do in the old one every time I need to switch oils. The old one has 2 tanks but one is only a dump tank for old oil and is not strong enough to be pressurized. This is useful if you just do oil changes in shocks, but I don't believe in that so it was no use to me. The new one has a computerized routine so I tell it what I am doing and then push a button and it does both the vacuuming and filling without me having to do it manually. Doing it manually is not a big deal though. The twin tanks are. I have my old one for sale. It would be great if one was just using one kind of oil or doing oil changes. Great size for a trailer too.
Maybe you can show us some case studies?
Hi Brodey. Please elaborate on what you mean by case studies.
where are you man? upload more videos, we need your knowledge!
Thanks! I'm running out of things I know about but as soon as I find something interesting I will. Getting very busy thanks to UA-cam
@@theohlinsguy4649 you can do a video of sealing shims, or an orientation of street or offroad valving