Great video Joe! I appreciate you going through all of the points on this system and man that thing has great potential especially being able to control the GPM by throttling it up or down. Thank for doing this and I'm sure Leon will be thanking you shortly with some good sales! I just got a P40 from North Georgia Airless this week and just combined it with John Hall's V2 proportional system, I can't wait to take that for a ride, I'm sure the difference will be radical from the 5.5 GPM unit I've been using.
Talk about one slick machine! I like to put a piece of tape to mark my flow rates incase i want a lesser flow rate or a hotter mix(8gpm downstream talk) same concept with any machine. Take the guess work out. Thank you for posting!
Awesome new equipment, Joe. I hope you had a good Thanksgiving. Yeah, I used to run everything through the reel manifold. Not anymore, I select what lenth I need off my storage reels and connect it bypassing the reel. Pro's the shorter lengths you use obviously gain a ton of performance, plus the lines don't jump like crazy causing the reel to "birds nest" and tangle up. Even if its pin locked, it will. It's nice to have length options and not be stuck with long lengths. Great video content as always!
@@DavidSunshineAquaWashfraction of the price of this pump from what I’ve seen. As impressive as it is I’m still enjoying my X-Jet. Best believe if it will fit in my x-jet bucket I’ll definitely jet it.
If a short 6-8” tube/nozzle was added to the gun I wonder much further it would reach. I’m sure 60ft should be about 3 stories or more. That should be good enough for any house except the ones with a heel on the rear by some of the lakes you’ve shown maybe. Great setup. Imagine running the 8pm, the X6, the 5.5, and this new system at once if you could keep up with water. You would be able to clean those apartments in half the time or less with 3 more ppl on a gun each. That would be nice.
You need to remove the quick connects on the whip line. It will help a bunch. One side is a swivel and one side is fixed. Quick connects will lower the flow some.
I think the value in that system is that you can run 1/2” hose and 300 feet of it makes it even better. Those systems that need 3/4 hose is a deal breaker for me. That looks like a great system..
everyone knows it's powerful. The question is will it Draw 60 percent bleach and 40 percent water to clean the roof correctly. if that test isn't done there's no way of knowing whether the job is being cleaned correctly. I understand if you don't want to do the test. But the consumer needs to know if there just blasting water on a roof or home.
It will pull bleach only if that’s what we want to do. 0-12.5% or anything in between. There isn’t any reason why this proportioner won’t perform as well as the multiple systems we’ve used in the past. I will do some testing in warmer weather to determine the accuracy of the valving
@@2bParagon I’ll agree it’s expensive, plus the cost of the remote control proportioner, 1/2” hose, new gun, etc it’s 9,500$ but we’ll pay for it in 1 week washing. Plus we’ll have an entire season of extremely fast efficient washing
@@powerfulimprovements that's cheating with a arm length while standing on the line that add to the distance. 😂 you know I'm picking on you and giving you a hard time. 😂 But over all you're one of the good people that actually shows a true test and explain to people why bucket testing is always important to do. No matter what system it is, because you as the operator and business you want to know what your equipment is doing and ratio you have. Vs best guessing or listening to what people say that not sure about their own equipment. Also happy holidays to you and your family, wash on my wash buddy..
Best test I’ve seen with Flo mo ! Thanks Joe
Glad you enjoyed it!
Great video Joe! I appreciate you going through all of the points on this system and man that thing has great potential especially being able to control the GPM by throttling it up or down. Thank for doing this and I'm sure Leon will be thanking you shortly with some good sales! I just got a P40 from North Georgia Airless this week and just combined it with John Hall's V2 proportional system, I can't wait to take that for a ride, I'm sure the difference will be radical from the 5.5 GPM unit I've been using.
It’ll be night and day I’m sure. I hear good things about the p40
Beautiful W990 tow truck
Beast
Talk about one slick machine! I like to put a piece of tape to mark my flow rates incase i want a lesser flow rate or a hotter mix(8gpm downstream talk) same concept with any machine. Take the guess work out. Thank you for posting!
@@jasonbraun9060 great idea
Awesome new equipment, Joe. I hope you had a good Thanksgiving. Yeah, I used to run everything through the reel manifold. Not anymore, I select what lenth I need off my storage reels and connect it bypassing the reel. Pro's the shorter lengths you use obviously gain a ton of performance, plus the lines don't jump like crazy causing the reel to "birds nest" and tangle up. Even if its pin locked, it will. It's nice to have length options and not be stuck with long lengths. Great video content as always!
@@sundown798 I think I may be making some adjustments
Baddass 👍💪
👊🏼👊🏼
Great video I applaud you for making it
I appreciate it
60’ with a good wind is crazy! Great investment in your business! You’ll be ready for the Spring! 🔥
I’m more than pleased
@ I got a p40 paired with a Honda gx200 on Black Friday for $1599, so I am working on reworking my trailer to accommodate.
@ that’s a slick pump
@@DavidSunshineAquaWashfraction of the price of this pump from what I’ve seen. As impressive as it is I’m still enjoying my X-Jet. Best believe if it will fit in my x-jet bucket I’ll definitely jet it.
Leon set me up with an ar45 4 years ago. Great Guy
He’s been great
Good video buddy, you've got me wanting to build one of these
I think the clutch mechanism is where the build becomes challenging
Great video buddy
Thank you Mr Little
I'mma get me one of those when I grow up!!!
Do it!!
thank you I be buying one soon. BigMackpressure wash NYC
Do it!
I’d love to see a 1 for 1 comparison of it with an ar45. Same conditions. Doesn’t seem like the extra few feet are worth 3 times the price.
I’d like to see that too. It seems the AR45 is more problematic. Also Leon was the king of AR45
Will this have a remote to turn on and off chemicals as well so you’re not running back to the truck to turn the dial?
100%. First wash tomorrow
If a short 6-8” tube/nozzle was added to the gun I wonder much further it would reach. I’m sure 60ft should be about 3 stories or more. That should be good enough for any house except the ones with a heel on the rear by some of the lakes you’ve shown maybe. Great setup.
Imagine running the 8pm, the X6, the 5.5, and this new system at once if you could keep up with water. You would be able to clean those apartments in half the time or less with 3 more ppl on a gun each. That would be nice.
I expect it will hit every I can hit currently with other systems. We certainly will be experimenting
Joe flow !!😁
@@tomalley798 Flow Pro Mo Flo Joe
wonder if you put the red gun on if that would change ?
We will find out. I’m guessing minimal and would guess Leon already did
Industrial stuffs....FTW!!!.... do itttttt❤👍🏻✌️😤
💪🏼💪🏼
@@powerfulimprovements ........ ya never know when such applications woll prefit....
You need to remove the quick connects on the whip line. It will help a bunch. One side is a swivel and one side is fixed. Quick connects will lower the flow some.
Yeah. The quick connect allows you to bleed and prime
I am curious to know the weak points of this system. I found the inlet on the AR breaks ,a $6 dollar part that is out of stock everywhere.
We are going to find out
💥💥💥💥💥💥💥💥💥💥💥💥= 12 Booms!
🔥🔥🔥🔥🔥🔥🔥🔥🔥🔥🔥🔥
Im still trying to figure out what product he is testing?
@@jd-it4on Leon Johns Mo Flo
Mine is sitting in the garage. Came on Tuesday. Haven't had a chance to swap it out with my AR45 yet. Any lessons learned on the install?
Heat gun on the tiger flex hoses for sure. Don’t forget to put oil in the machine! ✌🏼
What is up streaming mean, are the chemicals going thru the pump?
@@dalewilson7434 correct. Upstreaming is simply pulling with the pump. Downstreaming is after the pump
Unreal
Oh… it’s real ✌🏼
I think the value in that system is that you can run 1/2” hose and 300 feet of it makes it even better. Those systems that need 3/4 hose is a deal breaker for me. That looks like a great system..
Certainly. Dragging 3/4 is not feasible on the daily
This comment is 100%. Dragging 3/4 hose isn’t realistic
How many gallon buffer tank you have there.
@@mikemajestic66 I have two 275 tanks linked together so 550
Does the fire department have you on standby
Yes. I’m a brush fire truck 🔥
What's the cost of this unit?
I believe all pricing is listed on the site link in the description
조 !! 안녕~~
✌🏼✌🏼
Links?
@@DjehutimasAsarRa southernstyletrailerbuild.com/
If you pull out your reel all the way you will get more feet. The water going around in the reel doesn’t help the height
I’m sure
Yeah someone definitely needs to develop a better nozzle for the orange gun.
Mostly for the "fray"
Agreed
everyone knows it's powerful. The question is will it Draw 60 percent bleach and 40 percent water to clean the roof correctly. if that test isn't done there's no way of knowing whether the job is being cleaned correctly. I understand if you don't want to do the test. But the consumer needs to know if there just blasting water on a roof or home.
It will pull bleach only if that’s what we want to do. 0-12.5% or anything in between. There isn’t any reason why this proportioner won’t perform as well as the multiple systems we’ve used in the past. I will do some testing in warmer weather to determine the accuracy of the valving
💪🏼💪🏼
$6,500.00 - that's a hard pass
@@2bParagon I’ll agree it’s expensive, plus the cost of the remote control proportioner, 1/2” hose, new gun, etc it’s 9,500$ but we’ll pay for it in 1 week washing. Plus we’ll have an entire season of extremely fast efficient washing
really sick setup
@@hp4108 ✌🏼✌🏼
65ft plus 3ft 8" of arm length and trigger. Not bad
It should be far enough 🤣✌🏼
@@powerfulimprovements that's cheating with a arm length while standing on the line that add to the distance. 😂 you know I'm picking on you and giving you a hard time. 😂
But over all you're one of the good people that actually shows a true test and explain to people why bucket testing is always important to do. No matter what system it is, because you as the operator and business you want to know what your equipment is doing and ratio you have. Vs best guessing or listening to what people say that not sure about their own equipment.
Also happy holidays to you and your family, wash on my wash buddy..
@ Happy Holidays to you too! And thank you for always bringing some positive energy