what component is that one top-right of the cmos battery, the one with the black and white small cables entering? The white cable in my pc unplugged and won't fit anymore. After that my bluetooth headset constantly crackles, is it related?
Hi, that is a network card, not sure if crackling is related. white cable has become loose or it's not going inside? make sure that you are plugging correctly because sometimes if those pins are not aligned properly it doesn't get plugged. Hope the problem gets solved :)
@@itsadish61 it's the white one, seems like it won't fit that circular spot/pin. I'll try again, the black one is stile fitted, in a weird oblique direction. thanks :)
Very Detailed video Man, I needed this - - - - -I really appreciate the time and effort it took you - - - - -My silly laptop fans be sounding louder that a Night Club; driving me crazy - - -But thank again for this mater piece - - - Tho no voice it was still great and extremely helpful 🙌🙌🙌🙌🙌 🔥🔥🔥🔥
If this is gl503ge model, then can you tell me what was the gpu temperature while gaming. I did the repasting, the clock frequency definitely improved, but the gpu sits at 90 degrees Celsius
@@itsadish61 I'll try the benchmarking with valorant. The thing is that I feel that something in my laptop is faulty. Cpu temps like 95 are normal, well Intel says the same. But 90 degrees on gpu is threatening. I'm trying to reason with the service center that this 9p degree gpu temp isn't normal so just wanted proof if the temps on other gl503ge models are same or mine is faulty.
Hi great video, though my fan and heatsink doesn't have the numbers on near the screws. can you possible make a picture with the fan screw numbers to take out? thanks
Do you kniw if I can change the whole thermal heatsink? Mine isn’t covering the smaller chip at bottom left of the heatsink, near the battery. I saw in some of the other videos that the heatsink is different. Can you tell me what that chip is? I think the service engineer mixed up something . My cpu temps spike to 88/95 suddenly from 82ish when gpu stays at 80. If possible I would like to get another heatsink or fan and swap them. So many questions! I need answerers! I have a gl503 ge scar
hi, you may change the heatsink(consult to service center first) but I don't think so you will get the heatsink that will cover the small chip, mine is also the same only covering Nvidia GPU and CPU. The small chip is Intel UHD graphics which is mainly used to run the display and talking about the spike it depends on various factors such as sudden load on CPU, room temperature, fan speed, thermal paste conductivity, etc.
Hi Sergiu, Better the conductivity, better the thermal paste as the heat transfer will be better. Liquid metal thermal paste are the best, but I won't advise using them as slight mistake and your MB will be dead.
Hi Shivendra, I'm not an expert and do such DIY stuff, I often open my laptop's fan screw to clean the dust inside and has always worked for me for the past 4 years. Please make sure you are confident in what you are doing :)
Bro it's better to leave and let the heat sink pipe take the shape as I have done, but if you spread and if paste applied is uneven then air gap may form while placing heat pipe due to which heat transfer will not be that great
Hey, thanks for creating this video, it was very helpful for me. I did use the same thermal paste Artic MX4 since it was promoted even in Asus forums regarding thermal paste, And I got an idle temp of 38-45 and load temp of 75 (Celcius).
Hey Adish, can you tell me which screwdriver u used to remove Fans from the heat-sink. They have very screw and i dont have the specific one. From where did you buy it, pls
@@venky3867 it depends on few factors 1) durability of the paste 2) conductivity of the paste 3) if you are using cotton swabs like me then make sure there are no remains of swab 4) make sure to clean old thermal paste
Bro which among them is the hdd? My hdd seem to got cut off cuz of loose wires or something. It is not getting recognised anymore. I'm thinking of opening the laptop and just fixing the lose wires by myself. So which one is the hdd? Is it to the right of battery?
hi, sorry for the late reply, had covid, The Hdd is big part when you remove the first cover at back, it will be in front once you remove small back panel
Yeah, actually when charger is plugged in i.e. in extreme mode don't know why but temperature rises, but as soon as I disconnect the charger i.e. in standard mode temp. Will come back to 45-50° C. Before pasting temps were 98 with no load😭😭 so temperature from 98° C to 65°C is great success for me😅
thank for such indepth video. i also own gl503 for about a year now. im not repasting it yet as the temps are satisfactory but will definitely do it in a year or so. thanks✌️
Hi, I did not had any issues powering on, I did repasted it 3-4 times and never faced this issue. Did you check if battery wires are properly connected?
Great video! I do have a small issue though, I've reached the 6-5-4-3-2-1 screws but the 6, 4 and 2 screws (the larger ones) are stuck and won't come out. What should I do?
@@itsadish61 can you put a flipkart/amazon link in the video description or even provide one here? It will be extremely useful to anyone watching the video. Thanks.
@@anupamdey4893 bro I would love to help you but I really don't know what will be the size of small screwdriver as I haven't purchased any other product and also don't know the quality of the product, BTW I received that screwdriver from lenskart and luckily it worked for me
So I was doing this. Just to clean fans cause mine had started to stutter, now the laptop won’t start up. I didn’t repaste, I’m curious as to what happened wrong, or if there’s any insight toward that..
@@shobhitrealm yes bro...but I haven't faced such issues so don't know where to buy spare parts online. If you were from Mumbai and if it was non covid situation then I would have recommended to visit lamington road. But the situation 😟
Bro can I use Artic MX-5 instead of MX-4 at the same quantity? Or is the MX-4 better than MX-5? Also my left fan is tighter to rotate while the other fan spins freely. How do i fix it?
Hi, You can use any of the thermal paste(be careful while applying liquid metal paste), I researched in artic website and it shows MX-5 is better than MX-4. About the fan I'm not sure what is wrong, maybe because of dust accumulation or something else 🙂
i have a problem i changed the thermel paste but when i turned it on it didn't have picture or sound after that i took out the second ram out and it did work even when I put a new ram in the slot it don't turn on does any one know why
61°C is it idle temperature? I'm asking because you've just launched ROG Gaming Center app from the desktop without running any kind of stress test in the background. my idle temperature is 43°C without even repasting.
wow that's great, yes these were the temperature at idle, before repasting temps were about 96 C even at idle(as service engineer didn't applied the paste) so for me that's a great difference
Temperature doesn't get that high, I play rainbow six siege and max temperature was in 80s range and for normal chrome, programming work temperature is within 65°C
@@romeo16668 it is okay to use ram of different brand but make sure that frequency matches and use only ram of same size i.e. 8gb or it may affect performance.
I used GD900 thermal paste for this ROG, now extreme full load condition hit 74ºC after 5 minutes without overheat warning. Before with full dust in heatsink CPU temp hit 90ºC with overheat warning and CPU throtling.
Hi! I'm about to clean mine as well. I bought a thermal paste online, but as I have read in the comments section, others are not applying the thermal paste since they don't need to re-apply yet. My question is, how do I know if it's time to re-apply the thermal paste? My laptop is 2yrs old now btw.
@@SameerShaikh-lw9xh yes, liquid metal is best in terms of conductivity, but it has its own risks if not done properly.If not done properly it can short circuit the mother board
Which screwdriver works for the Small Screws of the fans? I opened up for cleaning purposes but wasn't able to find such a small-sized screwdriver... ALSO, wondering, What are temps After applying paste during gaming..?? Thanx for the great Guide...!
Hi, I was having small size screw driver which I got from lenskart😅😅(you can get it from local hardware store for 10-20 rupees) and the temperature I get are about 85°C for GTA 5 and rainbow six siege on high graphics
@@itsadish61 Exactly Man! When I saw you holding that.. I thought It could be lenskart! I have one too but funny how it didn't work with screws :/ Also what about your settings in witcher 3?
Adish bhai i own same laptop from 1 year 4 months now . I use it for normal work & i played games just few handful times. What do you think do i need to go for cleaning & thermal pasting ?
Hi bro, what temperatures you are getting on normal use and on gaming, if you are getting high temperature then you can think of cleaning and applying new paste😄
@@itsadish61 Thanks for reply bro . I dont know about temperatures bro ,i uninstalled gaming centre & it isnt reinstalling . Do you know other ways to find temperature ?
@@manojm6129 you can go to the official website of asus and download all the drivers and softwares from there. i did a fresh installation of windows on my gl503, everything was deleted including aura core, gaming center and every other software but later installed all of them again from the official website
@@itsadish61 you can try to turn off constant turbo mode on CPU and change battery settings to better performance instead the best performance. Could do the trick
just relax and trust what are you doing, the cover won't come off easily, you can use a flat screwdriver or something like that to separate the cover, once some part comes off the rest will come out easily, if you still think you can't then you may take professional help🙂
Note: This video is for information purpose only, I'm not responsible for any damages
Such a good Video It even shows The laptop turning on!!
You just gaing my sub mate!
thanks, mate.... really appreciate😃
what component is that one top-right of the cmos battery, the one with the black and white small cables entering? The white cable in my pc unplugged and won't fit anymore. After that my bluetooth headset constantly crackles, is it related?
Hi, that is a network card, not sure if crackling is related.
white cable has become loose or it's not going inside? make sure that you are plugging correctly because sometimes if those pins are not aligned properly it doesn't get plugged. Hope the problem gets solved :)
@@itsadish61 it's the white one, seems like it won't fit that circular spot/pin. I'll try again, the black one is stile fitted, in a weird oblique direction. thanks :)
Is the Thermal Grizzly brand any better?
Very Detailed video Man, I needed this - - - - -I really appreciate the time and effort it took you - - - - -My silly laptop fans be sounding louder that a Night Club; driving me crazy - - -But thank again for this mater piece - - - Tho no voice it was still great and extremely helpful 🙌🙌🙌🙌🙌 🔥🔥🔥🔥
Thank you so much 😊
@@itsadish61 also... Did you use antistatic wrist strap or antistatic mat? I wanna do mine today... Just got my thermal paste
@@adefabrisio8576 no I haven't used anything as such
@@itsadish61 Thank you.. Im midway now thanks to your video... About to apply my paste and recouple 🔥🔥💃🏾💃🏾💃🏾💃🏾... Thanks again bro
Thanks for the help, mine for some reason doesn’t have numbers so it really helped me in removing the heat sink
😀
If this is gl503ge model, then can you tell me what was the gpu temperature while gaming. I did the repasting, the clock frequency definitely improved, but the gpu sits at 90 degrees Celsius
Hi, I'm not much in gaming now, but occasionally I play valorant and temps are between 75-85 on High settings
@@itsadish61 I'll try the benchmarking with valorant. The thing is that I feel that something in my laptop is faulty. Cpu temps like 95 are normal, well Intel says the same. But 90 degrees on gpu is threatening. I'm trying to reason with the service center that this 9p degree gpu temp isn't normal so just wanted proof if the temps on other gl503ge models are same or mine is faulty.
@@itsadish61 do you put battery performance to best performance or better performance while gaming??
@@swarajsanjay3055 hi, sorry for the late reply, had covid, I put the battery to best performance
Hi great video, though my fan and heatsink doesn't have the numbers on near the screws. can you possible make a picture with the fan screw numbers to take out? thanks
Do you kniw if I can change the whole thermal heatsink? Mine isn’t covering the smaller chip at bottom left of the heatsink, near the battery. I saw in some of the other videos that the heatsink is different. Can you tell me what that chip is? I think the service engineer mixed up something . My cpu temps spike to 88/95 suddenly from 82ish when gpu stays at 80. If possible I would like to get another heatsink or fan and swap them.
So many questions! I need answerers!
I have a gl503 ge scar
hi, you may change the heatsink(consult to service center first) but I don't think so you will get the heatsink that will cover the small chip, mine is also the same only covering Nvidia GPU and CPU. The small chip is Intel UHD graphics which is mainly used to run the display and talking about the spike it depends on various factors such as sudden load on CPU, room temperature, fan speed, thermal paste conductivity, etc.
does it matter what type of thermal paste you use?
Hi Sergiu,
Better the conductivity, better the thermal paste as the heat transfer will be better. Liquid metal thermal paste are the best, but I won't advise using them as slight mistake and your MB will be dead.
Mini nuts on fan is safe to open??
Hi Shivendra,
I'm not an expert and do such DIY stuff, I often open my laptop's fan screw to clean the dust inside and has always worked for me for the past 4 years. Please make sure you are confident in what you are doing :)
Thank you so much. I was thinking about replacing my laptop, but repaste was all it needed and it is no longer slow after longer use. Thank you again!
🙂🙂
Bro i have coolermaster mastergel regular with flat nozzle do i need to spread the paste or just leave it as you did.
What should i do bro
Bro it's better to leave and let the heat sink pipe take the shape as I have done, but if you spread and if paste applied is uneven then air gap may form while placing heat pipe due to which heat transfer will not be that great
@@itsadish61 thank you bro.
Bro thanks for the video.. can I use hand Sanitizer as isopropyl alcohol?
Hello bro, sorry for late reply...it will be better if you use 90%+ isopropyl or ethanol alcohol since less than 90% will be more diluted with water.
@@itsadish61 thanks man
@@nokiaairtel5311 🙂
Hey, thanks for creating this video,
it was very helpful for me.
I did use the same thermal paste Artic MX4 since it was promoted even in Asus forums regarding thermal paste,
And I got an idle temp of 38-45 and load temp of 75 (Celcius).
Really nice video i never did something like this before and this helped me so much
Glad it helped you 😊
Hey Adish, can you tell me which screwdriver u used to remove Fans from the heat-sink. They have very screw and i dont have the specific one. From where did you buy it, pls
Hi vinit,
Actually I received this screwdriver from lenskart when I purchased the specs... you can buy screwdriver from any hardware shop
did you find it?
Gonna do it tomorrow! Wish me luck
All the best bro..😄
@@itsadish61 I've opened my laptop and repasted it more than 6 times
But few days after repasting the temps start to rise again and throttle the CPU
@@venky3867 it depends on few factors 1) durability of the paste 2) conductivity of the paste 3) if you are using cotton swabs like me then make sure there are no remains of swab 4) make sure to clean old thermal paste
@@itsadish61 I use MX4 2019 edition
I use microfiber cloth to clean residue paste.
I use pea method for both cpu and gpu
@@venky3867 don't know bro why it is happening
Bro which among them is the hdd?
My hdd seem to got cut off cuz of loose wires or something. It is not getting recognised anymore.
I'm thinking of opening the laptop and just fixing the lose wires by myself.
So which one is the hdd? Is it to the right of battery?
hi, sorry for the late reply, had covid, The Hdd is big part when you remove the first cover at back, it will be in front once you remove small back panel
Still looks pretty hot, 65 with no load?
Yeah, actually when charger is plugged in i.e. in extreme mode don't know why but temperature rises, but as soon as I disconnect the charger i.e. in standard mode temp. Will come back to 45-50° C. Before pasting temps were 98 with no load😭😭 so temperature from 98° C to 65°C is great success for me😅
thank for such indepth video. i also own gl503 for about a year now. im not repasting it yet as the temps are satisfactory but will definitely do it in a year or so. thanks✌️
😁✌️
Is 1g enough for this ?
Yup
Did you get any issue like not powering on? I have the same model, i am facing now. 😢
Hi,
I did not had any issues powering on, I did repasted it 3-4 times and never faced this issue. Did you check if battery wires are properly connected?
Great video! I do have a small issue though, I've reached the 6-5-4-3-2-1 screws but the 6, 4 and 2 screws (the larger ones) are stuck and won't come out.
What should I do?
Thanks...those screw doesn't come out as spring is attached to them on other side...just loosen them and remove heat pipe
@@itsadish61 thanks for the very fast reply, I've got it all sorted now. Fans cleaned and thermal paste replaced!
😁
What screwdriver set do you use brudda? The fan screws are so small.
Hi, actually I received this screwdriver when I brought my spectacles, but you can buy this screwdriver from any hardware shop
@@itsadish61 can you put a flipkart/amazon link in the video description or even provide one here? It will be extremely useful to anyone watching the video. Thanks.
@@anupamdey4893 bro I would love to help you but I really don't know what will be the size of small screwdriver as I haven't purchased any other product and also don't know the quality of the product, BTW I received that screwdriver from lenskart and luckily it worked for me
So I was doing this. Just to clean fans cause mine had started to stutter, now the laptop won’t start up. I didn’t repaste, I’m curious as to what happened wrong, or if there’s any insight toward that..
Did you plugged the battery, Check the display plug too
@@itsadish61 yes and yes, everything appears to be correct.
Check all the wiring again
what were your temperatures before applying the paste?
Temperatures were about 96° celcius as the service engineer didn't applied any thermal paste
@@itsadish61 oh. Gotcha. Thanks
How much temp difference did you get.
One of my fan needs replacement. Can you tell me the model no. of the fan and from where I can buy it?
Bro call service center for genuine parts
@@itsadish61 lockdown bro. Moreover they will replace the whole heatsink and charge too much
@@shobhitrealm yes bro...but I haven't faced such issues so don't know where to buy spare parts online. If you were from Mumbai and if it was non covid situation then I would have recommended to visit lamington road.
But the situation 😟
@@itsadish61 yep. Anyway thanks for replying. Good video too.
@@shobhitrealm thanks bro😊
Bro can I use Artic MX-5 instead of MX-4 at the same quantity? Or is the MX-4 better than MX-5?
Also my left fan is tighter to rotate while the other fan spins freely. How do i fix it?
Hi, You can use any of the thermal paste(be careful while applying liquid metal paste), I researched in artic website and it shows MX-5 is better than MX-4. About the fan I'm not sure what is wrong, maybe because of dust accumulation or something else 🙂
i have a problem i changed the thermel paste but when i turned it on it didn't have picture or sound after that i took out the second ram out and it did work even when I put a new ram in the slot it don't turn on does any one know why
Would you like to upload Tutorial Video disassembly Asus ROG GL503VS (Fan, thermal Paste, heat sink, etc) Please? Thank You.
Hi, sorry for late reply. I don't own ROG GL503VS so I can't... sorry 😔
61°C is it idle temperature?
I'm asking because you've just launched ROG Gaming Center app from the desktop without running any kind of stress test in the background. my idle temperature is 43°C without even repasting.
wow that's great, yes these were the temperature at idle, before repasting temps were about 96 C even at idle(as service engineer didn't applied the paste) so for me that's a great difference
if you wanna check the temps difference then you can check ua-cam.com/video/-AxrNm6G7UE/v-deo.html
Highly detailed video, thank you!
How are the temps after repasting? Like, while stress testing or gaming.
After repasting temperature was about 71° C while stress test.. if you want to have a look check this video
ua-cam.com/video/-AxrNm6G7UE/v-deo.html
@@itsadish61 ok thanks a lot
How are the temps now after almost 5 months
Temperature doesn't get that high, I play rainbow six siege and max temperature was in 80s range and for normal chrome, programming work temperature is within 65°C
@@itsadish61 thank you for your timely response.
Thank you so much! this is my first time opening a laptop and this tutorial was very detailed and helped me a lot 🤩🙏🙏
😄😄
How was Arctic mx-04 thermal paste?
Should i buy this or some other?
paste is great for the value, no issues till now, you can buy paste of high conductivity if you are hardcore gamer or want to spend more😅😅
if u want high performace paste get thermal grizzt kyronaut! its the best paste out in the market !!
@@pavansampath7201 yup that's the best in the market...when I brought artic; kryonout was not available in 1 gram packet.
thanks brother. was really helpful to me
Most welcome bro☺️
@@itsadish61 got 20 degree difference. All thanks to you😁
@@deeppatel0586 wow! Glad this video helped you 😁
Nice video.. i ve gl503 vm... And while gaming temp goes to 97©.. i need this video. Thanks for sharing
Glad this video helped you 😀
@@itsadish61 i ve 8 gb ram if i want to add more ram . Does it have to be the same brand??
@@romeo16668 it is okay to use ram of different brand but make sure that frequency matches and use only ram of same size i.e. 8gb or it may affect performance.
@@itsadish61 how do i know its same frequency?
@@romeo16668 go to task manager->performance-> memory there on right side will be the speed which is the frequency. mine is 2667Mhz
I used GD900 thermal paste for this ROG, now extreme full load condition hit 74ºC after 5 minutes without overheat warning. Before with full dust in heatsink CPU temp hit 90ºC with overheat warning and CPU throtling.
That's great 👍
I was searching for this and yt recommended me
😊
Hi! I'm about to clean mine as well. I bought a thermal paste online, but as I have read in the comments section, others are not applying the thermal paste since they don't need to re-apply yet. My question is, how do I know if it's time to re-apply the thermal paste? My laptop is 2yrs old now btw.
Hi, if temps are same when you brought your laptop or temperature is not that high then there is no need to change the paste
Ok great. Thanks for the info! :D
But asus has already applied liquid metal then why ur laptop doesn't have ?
Laptop motherboard was not working so they replaced it and while replacing maybe they didn't apply...
I was also surprised that they didn't applied thermal paste
@@itsadish61 u should apply liquid metal becoz it will be long last and asus also recommended this.
@@SameerShaikh-lw9xh yes, liquid metal is best in terms of conductivity, but it has its own risks if not done properly.If not done properly it can short circuit the mother board
Which screwdriver works for the Small Screws of the fans? I opened up for cleaning purposes but wasn't able to find such a small-sized screwdriver... ALSO, wondering, What are temps After applying paste during gaming..?? Thanx for the great Guide...!
Hi, I was having small size screw driver which I got from lenskart😅😅(you can get it from local hardware store for 10-20 rupees) and the temperature I get are about 85°C for GTA 5 and rainbow six siege on high graphics
@@itsadish61 Exactly Man! When I saw you holding that.. I thought It could be lenskart! I have one too but funny how it didn't work with screws :/ Also what about your settings in witcher 3?
@@PrimordialStrange sorry bro never got time to play that game 😅
@@itsadish61 Alright! Thanx
What's the avg FPS in rainbow six siege after the repaste? Also what are the temps on idle and under load?
Thank you! Its a really helpful vid 👍🙏
😊
Adish bhai i own same laptop from 1 year 4 months now . I use it for normal work & i played games just few handful times. What do you think do i need to go for cleaning & thermal pasting ?
Hi bro, what temperatures you are getting on normal use and on gaming, if you are getting high temperature then you can think of cleaning and applying new paste😄
@@itsadish61 Thanks for reply bro . I dont know about temperatures bro ,i uninstalled gaming centre & it isnt reinstalling . Do you know other ways to find temperature ?
Hi, you can try Intel's XTU Service
@@itsadish61 thankyou bro
@@manojm6129 you can go to the official website of asus and download all the drivers and softwares from there. i did a fresh installation of windows on my gl503, everything was deleted including aura core, gaming center and every other software but later installed all of them again from the official website
I was doing the same thing as what you did in the video but now my screen won't turning on, can you help me? :(
Did you again connect the battery?
@@itsadish61 I think I missed the unplug the battery part, and I think my screen cable is short circuited is it possible?
@@farishizrian5148 don't know mate check again if all wires are plugged properly, is laptop getting power?
@@itsadish61 yes I triple checked and yes the laptop can be turn on but just the monitor that didn't :(
well done , helped me . Thanks mate
😁
Very well explained. Thank you for this video.
😁
Over 60 degrees on idle is still too much. I have similar laptop and after cleaning and changing thermal paste i got 50 degrees.
Yes bro don't know why but if laptop is plugged in temps rises and when on battery power temps are like 45-49 on idle
@@itsadish61 you can try to turn off constant turbo mode on CPU and change battery settings to better performance instead the best performance. Could do the trick
@@Dzeividz yup
I want to open up my laptop to clean the fans, but im scared pf scratching it.... bcs after i remove the screws, the cover won't come off
just relax and trust what are you doing, the cover won't come off easily, you can use a flat screwdriver or something like that to separate the cover, once some part comes off the rest will come out easily, if you still think you can't then you may take professional help🙂
@@itsadish61 thx, i did it!! and it worked just fine
@@mihaiioja7937 great
Nice one really helpful
Thanks
Wish I could do it myself as well, but it's just too complicated to me.
thank you for this tutorial it helps me alot.
😄
He said scraping up the paste like asus even put any lol
😂😂
Usually it should be there
Good video !!
Thanks bro 😊
thanks dude :)
You are most welcome bro😀
Thanks for helping me
Thanks
Thanks
Nice one
Thanks
Sangat membantu, terimakasih ^^
Bhai plz "PUBG PC" download karna dikha dijiye
bhai PUBG PC paid game hai...aap steam se download kar sakte ho ...sale chal rahi toh 500 me mil raha game
I cant find the number 1 screw to open
There should be imprint of every number
Bhai Power Cored Disconnect karleta yaar 🤣🤣🤣🤣
Bhai, kar liya yar battery disconnect 2:31 pe hi