No more headaches ! How To Restart When Keyhole Explodes During TIG Welding Lay Wire Root Pass
Вставка
- Опубліковано 12 вер 2024
- Hello everyone.
Sometimes mistakes are made when rootpathing a stainless pipe with laywire techniques.
Sometimes the keyhole bursts as the welding rod separates from the molten pool.
Today we are talking about the basic principles of how to restart when the keyhole explodes.
In the future, I will introduce other mistakes and solutions to them.
Thanks for watching and have a nice week.
#TIG
#welding
#pipe
#root
#mistakes
#and
#solution
Nice video.
You explained and showed it very well! 👍🏻💪🏻
I think the videos, where mistakes happen and you can solve them, are great.
Very fine video , yes a situation we can all find our selves in , and well demonstrated .
I'm French welder... ..
Congratulation for your welding vidéo
So Fine..!!!
👍... Great great good technics...
See you soon🙋♂️
역시나 언제나 1센치 뒤에서 다시 시작하는게 정석이군요. 감사합니다ㅑ.
Thank you for your demonstration
이렇게 중요한 핵심 포인트를 알려주시다니 ㄷㄷ... 용접으로 밥먹고 살려면 반듯이 알아야 할 영상 입니다 ,, 이거 못하면 어디가서 용접 한다는 소리 못합니다 ,, 그정도로 중요한 겁니다 ,, 이것도 모르면서 지가 용접 잘하는 줄 알고 노가다 가서 용접하다 망하는 꼴 많이 봤죠 ,,ㅎㅎㅎ 용접에 대충은 없다고 생각 하세요 ,, 대충할꺼면 애초에 용접자체를 안합니다 ㅎㅎㅎ 그정도로 중요 하기에 용접을 하는 것이지요 ,, 정말 좋은 영상 입니다 ,, 이분 나라에서 상 안주나요??? ㅎㅎㅎ 잘보고 갑니다 푸힛~~!
Thank you.MASTER.
항상 영상보며 연습 꾸준히 하고있습니다 감사합니다
Muy buen video es un un error muy común cuando haces soldadura para placa. Me gustaría q hagas un vídeo del mismo contenido pero soldando orizontal
스승님 존경합니다.
잘지내시죠
좋은 영상 항상감사드립니다
수고하셨슴니다
좋은방법제시 감사합니다!
Великолепный контент, ёмко, детально без лишних пустых разговоров. Аналог в РФ только по мма сварке есть. По тигу много говорят и в целом не способны объяснить те или иные моменты.
Sim mestre observei que a sempre uma dificuldade quando estoura o buraco de fechadura e com essa aula de hoje aprendi como posso corrigir esse erro obrigado pela orientação 🙏
Ketika suatu kendala sudah teratasi ini akan sangat memberikan kepuasan tersendiri bagi kita
Nice
좋은 영상 감사합니다...^^
감사합니다!😃
Useful video
Salve salve Brasil 🇧🇷
والله فنان
안녕하세요 !!!
Thanks you very much !
Very nice Video.👍
Hello my friend im turkey
Number 1 💪💪💪💪💪
wow so big gap, do you have to use high pressure of purge so you dont get dripp on root?
Perhaps the purge pressure has a slight effect, but it is more important to keep the heat input not too much.
@@weldHAGOJIBI i dont have experience welding thicker material more than 3 mm. So i dont know much, my work mostly are 2mm ss pipe
감사합니다
선생님, 달고 가다가 와이어를 빼야하는 상황이 되서 와이어를 뺄때, 뒤로 용접물이 맺히지 않게 하려면, 어떻게 해야하나요? 5G상황에서요
可以教學。
焊接管材底部的方法嗎?
파이프 안쪽 촬영 굿
Сверх мастерство ✊.
Ж
Ж
❤❤❤❤❤😀😀😀
🛠🛠🛠💯👍
Одного не пойму, я смотрю корейский канал, но название на русском
Невъебенно охуенно, а самое главное нет рекламы.
👍👌🤝🤝
Ни хуя не понятно,но очень интересно👍👏🙌🤝
Are you hiring?
Most of the time, I'm just doing things by myself.