Reading comments I see this only works if blowby is caused from sitting. What’s happening while sitting that causes blow by?? My Kubota sits during winter. Is that ok? Usually 4 months or so.
@@tractorsmarinemechanic my youngin was mowing and jobbed a limb through the radiator of my L3010. Of course he ran it till it died. Once it cooled off I fired it up and drove it back to the house. It has a little blow by now, but sill plenty of power for a '00 model. Any ideas on how to fix the blow by?
I have a iseki Tl2101F E3AG1 engine with enough blow by to rattle the breather when turned up side down on the breather pipe, could this work for my engine? over 2500 hours, was in severe need of fluid and filter change when I got it, fuel filter had sludge in it.
Kpg po mlki n Ang clearance palit k ng RING STD p rin..palit kn nrin ng sleeve kpg may tama n Ang sleeve.my sleeve po Ang block nyn.kpg mag over size k ng piston ring hndi tumatagal Ang makina.sira n rin b Ang transmission mo?or Anu sira ng transmission mo?my front drive po b Ang unit mo?
Hi, I am about to purchase a satoh buck Mitsubishi 3 diesel cylinder engine , when you try to open the top oil cap while the engine is running , you feel the cap is sucked and when you take of and put your hand palm you feel your palm sucked ! Is that Good news or bad news ? Please tell me . The mini tractor is from 1980 and has 8000 hours .
@@tractorsmarinemechanic hola tengo una pregunta tengo un 1988 john deere 750 3 cylinders que no tiene mucha presión la bombe del diésel como se saca la bomba para repararla
Hello do you have any videos on yanmar tractor fuel injectors? I think that is my problem white or blue smoke can't tell some times knock runs rough not much power and sometimes it is ok I have removed injector nozzles a few times needle keeps getting stuck also check compression with cheap rig put together the gauge was leaking read about 320psi anyway I think it is fuel injector
Thank you for watching.im sorry don't have a video for a yanmar engine.your problem is the injector.just remove all injector and calibrate one by one.thank you
And only by flushing the engine with diesel,you fixed the problem? Is interesting because i have the same problem with my kubota b 7000 and i will try your method.
Just try it if your tractor didn't used for several months then blowby is coming out but when you used every other day or everyday your tractor is already blowby and need to replace piston ring or maybe also sleeve.thank you for watching
If that solved the problem, is just a matter of time till it happen again. What probably cause this is the mix between fuel from the gases and the oil. If you cleaned the old oil with diesel, there is no way you are able to completely remove all that diesel out. So the new oil will be right under great degradation from the start. If after a couple of hours you remove that oil and change it again for new one, that will probably be a good job. I'm saying this with no particular knowledge over this kind of engine. Something i'm missing, or my point is just out of purpose?
My car is hyundai santafe 2.2 CRDI disel engine,year 2008 have blow out also same case.I want to do same thing on my engine .if I do that am worried have some problems.Can you advise me?Thanks much.
tractors&marine MECHANIC thanks reply i use car every week ,still engine had blow by .my car ODO 125000 km,however I checked oil level every 5000km then found not much loss oil level engine and engine power still ok.So is it ok or not.do we replace ring & piton?
@@tractorsmarinemechanic gusto bumili. pag uwi ko nalang boss andito pa ako sa abroad. pano kaya pag transport yan sa mindanao. meron bang maghahatid doon?
Wag mo lalakihan sir kc magkaprolima k hood at cover.isa pa Kung ayaw maalis init,palitan mo ung fan blade Ang ipalit mo ung sa L2202 or sa L2402 kc pareho lng Ang radiator nila iba lng fan blade,fan at cover lng Ang palitan mo.salamat at keep subscribing at paki like and those my video you've watched.salamat ulit
How much ATF would you put in the oil? A quart? (Hinomoto E230) I have a little more blow back than normal and tried a couple oil additive. Thought giving ATF a try. Thanks!
Sir UNG tractor ko nagganyan din ako..nilagyan ko isang lettro Ng krudo at pinaandar Ng ilang menuto ska ngchange oil..pagkapandar ko ganun pa din sir may usok parin sa breather..ano Kaya gagawin ko sir...slamt
Lagi mo b ginagamit ung unit mo?Kung madalas mo gamitin ung tractor mo at may usok n Ang breather at hndi maalis Ang usok.blowby n po tlaga un at kailangan mo ng tingnan Ang piston ring at sleeve.baklas in po ng tractor mo,pero Kung malakas p nmn wag mo Muna baklasin.anu model ng tractor mo?
@@tractorsmarinemechanic ah ganun po ba sir...malakas pa nmn po sir ...mejo mausok Lalo pag nag aararo at biglang lumalim Ang kain Ng rotor...zl2202 ung unit ko sir...magkano magastos sa frontdrive nya sir kc nabili ko Wala na laman sa loob pati UNG ilalim nya na umiikot papunta sa harap...salamt sir
Lahat b walang laman pati ung drive gear nya s ilalim ng differential?malaki Ang maubos mo dyn sir.bumili k n lng ng kompleto kpg nkaipon k.pki like nmn sir ung video ko share and subscribe k po.salamat.
Hi I have the same engine and it’s a pain to start when cold, glow plugs are good and working, all filters new, diesel drained and new diesel, new 12v in line fuel pump, injectors tested and new nozzles, did numerous oil flushes in case it was sticky rings adjusted the valves and when cranking there’s lots of smoke 💨 and it’s trying its hardest to fire, any suggestions ? Is there timing on the pump or adjustment any help would be greatly appreciated thank you 🙏
@@tractorsmarinemechanic thanks so much for the speedy reply, smoke is white black it’s like unburnt fuel, I don’t think I have the plunger on my model, are you referring to the plunger with the rod ? My machine will Only start in a particular position on the throttle lever it’s very fussy
I think Your injection pump.is the problem.i have many injection pump videos you can watch and learn.is it the rack or lever hard to move,maybe one of the plunger was stuck up or delivery valve.
@@tractorsmarinemechanic thanks again, I might remove the pump and inspect its plungers, everything seems free nothing is seized or stuck, I subscribe and watch a few of your videos thank you 🙏
I have heard of this many times but never tried. Isn't there a risk that the engine can get into a runaway condition where it starts burning diesel from the sump? I suspect that could happen on a worn engine. I would watch the engine at all times and be ready to block the intake with a flat surface of some sort. Whatever you do, on't use your hand!
in that case get a rag or a piece of flat wood that can block the intake. the engine is not smokey at all. similar condition to my d750 and i bought a d850 to replace it ! will surely try this before i start undoing the engine and keep the D850 as a spare or take it back!
Fuel in old oil to thin will cause bloe bye.
New heavy oil slows it down .
Reading comments I see this only works if blowby is caused from sitting. What’s happening while sitting that causes blow by?? My Kubota sits during winter. Is that ok? Usually 4 months or so.
Auz ung video nio sir. Marami aqng matututunan at mae apply sa tractor namin. Salamat
Salamat nman sir.kindly hits like and share
.kailangan ko lng ng subscriber para up to 1k.
How does running diesel in your oil pan fix blowby? Is it re honing the cylinder and rings or something?
Drained some oil out, What did he put back in the engine? Water? Diesel Fuel? ?????
Diesel
@@tractorsmarinemechanic my youngin was mowing and jobbed a limb through the radiator of my L3010. Of course he ran it till it died. Once it cooled off I fired it up and drove it back to the house. It has a little blow by now, but sill plenty of power for a '00 model. Any ideas on how to fix the blow by?
So to do this drain all the oil? Or just half of it or? And how much diesel or atf added? Then run it gor how long?
I have a iseki Tl2101F E3AG1 engine with enough blow by to rattle the breather when turned up side down on the breather pipe, could this work for my engine? over 2500 hours, was in severe need of fluid and filter change when I got it, fuel filter had sludge in it.
Волшебник :)
What did you do here? Change your oil??
Boss pano tanggalin impeller ng water pump nyan? Bearing na ksi yung sakin. May thread ba ung impeller at shafting nya? O pinipress lng pra matanggal?
Very good work ❤❤❤
boss pagmalaki na ang clearance ng piston ring sa liner. pagnagpalit po ako ng ring, standard parin ba or oversize ring na? kubota d950 po engine.
Kpg po mlki n Ang clearance palit k ng RING STD p rin..palit kn nrin ng sleeve kpg may tama n Ang sleeve.my sleeve po Ang block nyn.kpg mag over size k ng piston ring hndi tumatagal Ang makina.sira n rin b Ang transmission mo?or Anu sira ng transmission mo?my front drive po b Ang unit mo?
Scusami a me fa lo stesso fatto del tuo cosa può essere tu dici lo stantuffo e dove si trova del trattore. Grazie in anticipo..
I'm sorry sir I try to understand your questions.can you repeat it.im sorry.
Hi, I am about to purchase a satoh buck Mitsubishi 3 diesel cylinder engine , when you try to open the top oil cap while the engine is running , you feel the cap is sucked and when you take of and put your hand palm you feel your palm sucked !
Is that Good news or bad news ?
Please tell me . The mini tractor is from 1980 and has 8000 hours .
Good and that's normal for the second hand tractor.
Sir anu magandang makina x tractor. 3 engine or 2 engine lng?
Kubota sir kc madami piesa
Cuanto tiempo lo dejaste prendido con el diesel
señor, gracias por sus comentarios, déjelo funcionar durante 5 minutos y drene para cambiar el aceite
@@tractorsmarinemechanic hola tengo una pregunta tengo un 1988 john deere 750 3 cylinders que no tiene mucha presión la bombe del diésel como se saca la bomba para repararla
Hello do you have any videos on yanmar tractor fuel injectors? I think that is my problem white or blue smoke can't tell some times knock runs rough not much power and sometimes it is ok I have removed injector nozzles a few times needle keeps getting stuck also check compression with cheap rig put together the gauge was leaking read about 320psi anyway I think it is fuel injector
Thank you for watching.im sorry don't have a video for a yanmar engine.your problem is the injector.just remove all injector and calibrate one by one.thank you
I think I will need to buy injector test machine or can I do without it and thank you
You can not measure or calculate the injector pressure unlike to the ISUZU injector you can do it without calibrating machine.thank you
Ok thank you
sir pwede rin po ba to sa kubota L2202?
Pwde sir.
In my tractor this breather pipe is connect to air intake and the pipe is leaking is there any problem
Is it also a Kubota engine or hinomoto engine?
@@tractorsmarinemechanic the oil us coming to air intake through that breather pipe does it cause any problem
Desiel yun bossing?
And only by flushing the engine with diesel,you fixed the problem? Is interesting because i have the same problem with my kubota b 7000 and i will try your method.
Thank you for watching.pls subscribe.
Skillful fingers
Thanks for watching
I will try this methit on my sm4030 u kabota hope it works any advise
Just try it if your tractor didn't used for several months then blowby is coming out but when you used every other day or everyday your tractor is already blowby and need to replace piston ring or maybe also sleeve.thank you for watching
If that solved the problem, is just a matter of time till it happen again. What probably cause this is the mix between fuel from the gases and the oil. If you cleaned the old oil with diesel, there is no way you are able to completely remove all that diesel out. So the new oil will be right under great degradation from the start. If after a couple of hours you remove that oil and change it again for new one, that will probably be a good job. I'm saying this with no particular knowledge over this kind of engine. Something i'm missing, or my point is just out of purpose?
Where do you check oil level?
Oil level engine or hydraulic oil?Check your engine oil level at the dip stick beside from the starter
Reducing the viscosity of the oil a think is not a good idea . This is very risky if you don't know what your doing.
Deisel po ba yun boss
Diesel po
Gracias.
My car is hyundai santafe 2.2 CRDI disel engine,year 2008 have blow out also same case.I want to do same thing on my engine .if I do that am worried have some problems.Can you advise me?Thanks much.
Thank you for watching.how many months did you not use your car or did you use your car everyday?
tractors&marine MECHANIC thanks reply i use car every week ,still engine had blow by .my car ODO 125000 km,however I checked oil level every 5000km then found not much loss oil level engine and engine power still ok.So is it ok or not.do we replace ring & piton?
@@huybuiquoc3672 replace your piston ring that's already a blowby
Boss ano firing order Ng. 3cylider kubota
Karamihan po 123 s Kubota.
Pasubscribe nmn po at ipakita ko Kung paano mag tune up with out timing mark for the 3 cylinder
Paano po malalaman kung blowby na ang isang makina ng tractor sir?
Mausok n po Ang breather at mahina n Ang engine mo.
salamat sa video boss.
Salamat din po s panunood.pls subscribe nmn po and share.
@@tractorsmarinemechanic subscribe na boss. saan po location nyo boss. meron ba kayo sa davao or anywhere in mindanao?
Wala po.nasa Caloocan lng po kami.bibili k po b ng tractor?
@@tractorsmarinemechanic saan makabili ng tractor sa bandang mindanao boss.
@@tractorsmarinemechanic gusto bumili. pag uwi ko nalang boss andito pa ako sa abroad. pano kaya pag transport yan sa mindanao. meron bang maghahatid doon?
What did you put in Engine, English please
Thank you for watching.i put one or two litter of diesel and after 5mins.of engine running,I drain and put a new engine oil.
Sir pwd po mag tanung ung radiator po Ng 1802 pwd ba iconvert at anung radiator Ang pwepwede salamat Po...
Mabilis na po Kasi uminit makina Kasi kunti lng tubig Nia gusto kuh sanang palakihin ung radiator..
Palinis mo Muna sir kc marumi n Ang core nyn at tanong s pagawaan ng radiator Kung pwd ipa double ung core nya.wag mo lalakihan kc magkaprolima
Wag mo lalakihan sir kc magkaprolima k hood at cover.isa pa Kung ayaw maalis init,palitan mo ung fan blade Ang ipalit mo ung sa L2202 or sa L2402 kc pareho lng Ang radiator nila iba lng fan blade,fan at cover lng Ang palitan mo.salamat at keep subscribing at paki like and those my video you've watched.salamat ulit
Kasi ung kasama kuh na 1802 malapad ung radiator surplus Pinoy Kasi sakanila...tsaka ung radiator kuh boss anim na butas na Ang and gumagana boss..
Ok lng kht magtabas aq SA hood Nia Basta mapalaki kuh lng boss..
Pede rin ba sa kotse yan sir
Pwd boss.basta't sa akala mo n tulog Ang piston ring or stuck up Kung Ang unit matagal Ng hndi ginagamit
Ganun din po ba pag IZEKI,kasi yung IZEKI ko may konting usok na sa oil cap
ATF works great, safer for the motor too
How much ATF would you put in the oil? A quart? (Hinomoto E230) I have a little more blow back than normal and tried a couple oil additive. Thought giving ATF a try. Thanks!
@@donmahone4847i would use ATF before an oil change 1/2 a quart. Depends on you. Of course not recommended
Sir UNG tractor ko nagganyan din ako..nilagyan ko isang lettro Ng krudo at pinaandar Ng ilang menuto ska ngchange oil..pagkapandar ko ganun pa din sir may usok parin sa breather..ano Kaya gagawin ko sir...slamt
Lagi mo b ginagamit ung unit mo?Kung madalas mo gamitin ung tractor mo at may usok n Ang breather at hndi maalis Ang usok.blowby n po tlaga un at kailangan mo ng tingnan Ang piston ring at sleeve.baklas in po ng tractor mo,pero Kung malakas p nmn wag mo Muna baklasin.anu model ng tractor mo?
@@tractorsmarinemechanic ah ganun po ba sir...malakas pa nmn po sir ...mejo mausok Lalo pag nag aararo at biglang lumalim Ang kain Ng rotor...zl2202 ung unit ko sir...magkano magastos sa frontdrive nya sir kc nabili ko Wala na laman sa loob pati UNG ilalim nya na umiikot papunta sa harap...salamt sir
Lahat b walang laman pati ung drive gear nya s ilalim ng differential?malaki Ang maubos mo dyn sir.bumili k n lng ng kompleto kpg nkaipon k.pki like nmn sir ung video ko share and subscribe k po.salamat.
Hi I have the same engine and it’s a pain to start when cold, glow plugs are good and working, all filters new, diesel drained and new diesel, new 12v in line fuel pump, injectors tested and new nozzles, did numerous oil flushes in case it was sticky rings adjusted the valves and when cranking there’s lots of smoke 💨 and it’s trying its hardest to fire, any suggestions ? Is there timing on the pump or adjustment any help would be greatly appreciated thank you 🙏
Did you also replace plunger?what kind of smoke?is it black or white?
@@tractorsmarinemechanic thanks so much for the speedy reply, smoke is white black it’s like unburnt fuel, I don’t think I have the plunger on my model, are you referring to the plunger with the rod ? My machine will
Only start in a particular position on the throttle lever it’s very fussy
I think Your injection pump.is the problem.i have many injection pump videos you can watch and learn.is it the rack or lever hard to move,maybe one of the plunger was stuck up or delivery valve.
@@tractorsmarinemechanic thanks again, I might remove the pump and inspect its plungers, everything seems free nothing is seized or stuck, I subscribe and watch a few of your videos thank you 🙏
Thank you too for subscribing.
pag mausok na puti pag binibirit
I have heard of this many times but never tried. Isn't there a risk that the engine can get into a runaway condition where it starts burning diesel from the sump? I suspect that could happen on a worn engine.
I would watch the engine at all times and be ready to block the intake with a flat surface of some sort. Whatever you do, on't use your hand!
Thank you for watching and also for your comment.
in that case get a rag or a piece of flat wood that can block the intake. the engine is not smokey at all. similar condition to my d750 and i bought a d850 to replace it ! will surely try this before i start undoing the engine and keep the D850 as a spare or take it back!
Tnung ko lang sir bakit ung makina ko po pag ginagamit ko ng matagal biglang humihina hatak anu puba sira pag ganun
Anu po unit nyo mam?
Если можешь напиши по русски что это было?
это было
дизельного топливo . лучше взять нефть
lol...buy a funnel
Σε kubota b1600 μπορώ να το κάνω μου κάνει το ίδιο βάζω λάδι 20-50
Nai filimou bori.
Ano po contact number nyo
09502423351