There is absolutely no way they are getting penetration by stitch welding. They also need reinforcement plates on the outside and inside of the splice points. I hope this is a joke and they're going to pull it apart and do it right! Either that or I hope the guy that's driving is only hauling goose feathers. Apparently as is no warranty.
Can the truck's machine bear the weight of the amount of metal placed on it, not to mention the cargo it will carry? In addition, it is not safe to drive on the roads due to the lack of tires to support it on the roads, and it may overturn.
Brothers have skills that’s for sure. That would be a great mobile home to drive into place then park and support the frame. As for driving heavy loads I’ll pray for you. 🙏🏼
Работа людей, отличная. Сама идея, не выдерживает ни какой критики.этот фургон весит, как разрешенная грузоподъёмность..возить на ней только воздух.. Безумие.
Should be smaller piece of chassis put on the inside to stagger the joint welded back together and a Mig welder would be stronger and save a heap of time. Nonetheless good job considering what you've got to work with
This is how you get 100 large trucks for price of one German one and fitted for the local market. If you check Starship of SpaceX was/is being built in sandy clean air of Texas by Mexican welders who make the steel water tanks. You got to understand the basics of technology. Ask Elon Musk.
Also no idea of engine size before as lengthening to that size without increase in engine size ie cc or power size say a 3 litre upto a 5 litre as the engine not cope with the extra weight either
So you take a 7 ton max truck load it with 3 to 4 ton plus steel container body to carry what 2 to 3 ton safely because your not telling us the full story ie what weight of truck ie GVW or load weight etc before or after
I am sorry. I see a lot of bullshit. It's wrong in so many ways.. Schöne Grüße von einem deutschen Kraftfahrzeug Techniker Meister und Sachverständigen! 😘✌️
It was a beautiful little truck before. You’d think ‘perfect for inner-city delivery in town.’ But,… no, you want a ‘mega-mover’ for moving mountains. You need at least one axle and four more tires. Have you seen the inner country roads those trucks have to be on? You really need ‘half-tracks’ off a tank. Well, I’ll wait for the next ‘Pakistani-mangled truck repair’ to see our cute little truck brought back to life with a chisel, a hammer and a crow bar.
These guys are taking what they have and making what they need. I would love to have a shop with them as employees. I really enjoy watching them work.
Trabalho merecedor de todo respeito 👏👏👏👏👏👏👏👏👏👏👏👏👏
There is absolutely no way they are getting penetration by stitch welding. They also need reinforcement plates on the outside and inside of the splice points. I hope this is a joke and they're going to pull it apart and do it right! Either that or I hope the guy that's driving is only hauling goose feathers. Apparently as is no warranty.
Very good work, high quality perfection
Thanks 🤩
Great 👌 job guys 👌👌👌👌
Can the truck's machine bear the weight of the amount of metal placed on it, not to mention the cargo it will carry? In addition, it is not safe to drive on the roads due to the lack of tires to support it on the roads, and it may overturn.
Gracias por compartir el video..de que país son..?? SALUDOS DESDE ARGENTINA
This is From Pakistan
I wouldn't drive across market place in that bloody thing 💀
Not dodgy at all 😳🤞
@@paulbeasley5026😊
Just what the factory had in mind.
AT 80... GREAT ACCOMPLISHMENT AND LOTS OF FORWARD THINKING ON THIS ONE.
half blind guys putting a truck together with tack welds. unbelievable.
Brothers have skills that’s for sure. That would be a great mobile home to drive into place then park and support the frame. As for driving heavy loads I’ll pray for you. 🙏🏼
They should have moved that truck they were painting, because it would have been damaged by the welding sparks.
Athena new chassis and container is so heavy, will the vehicle pull the load
frightning to think what kind of weights thiis things going to carry, what ever it is you can bet its well above its origanal desiegn weight
And no brake upgrades
Seen ot done loads in uk but on ford transit pick up extended for a car transporter
Работа людей, отличная. Сама идея, не выдерживает ни какой критики.этот фургон весит, как разрешенная грузоподъёмность..возить на ней только воздух.. Безумие.
As usual, amazing work with primative tools and facility. God bless body filler.
Thank you very much!
các anh rất giỏi
Should be smaller piece of chassis put on the inside to stagger the joint welded back together and a Mig welder would be stronger and save a heap of time.
Nonetheless good job considering what you've got to work with
Another pair of axles on the back could be safe.
The overhang at the rear is very high.
Mini LKW aber Riesen Ladefläche!!🤣
😮AMAZING❤❤❤❤❤
Could you tell us where to buy some Rayban welding glasses too and what you fireproof beards and sandals with
Can you stop it when it's loaded or does it just slow down slightly before impact?
Another deathtrap
So much weight added to the truck,what do they plan on hauling?..
The engine is going into overtime with that extra weight to pull indias not all flat but well done you 👏 👍 😀
「パテと塗装で防水処理ができる」ということなの？？？
溶接の段階で隙間があると、浸水は免れない気がする。
Great job Pakistani ❤❤
They must added 2 tons of extra weight to that flemzy frame
A waste of good steel.
Excellent work keep it up 👍 ❤
Todo unido con puntos de soldadura...
This is how you get 100 large trucks for price of one German one and fitted for the local market. If you check Starship of SpaceX was/is being built in sandy clean air of Texas by Mexican welders who make the steel water tanks. You got to understand the basics of technology. Ask Elon Musk.
18:26 what a shame to see the welders not wearing any eye protection most of the time. 18:26 the time.
Also no idea of engine size before as lengthening to that size without increase in engine size ie cc or power size say a 3 litre upto a 5 litre as the engine not cope with the extra weight either
So you take a 7 ton max truck load it with 3 to 4 ton plus steel container body to carry what 2 to 3 ton safely because your not telling us the full story ie what weight of truck ie GVW or load weight etc before or after
Die Monsteraufbauten passen garnicht zu den Fahrgestellen,viel zu schwer.😵💫😊
I hope they put bigger leaf springs in
I am sorry. I see a lot of bullshit. It's wrong in so many ways.. Schöne Grüße von einem deutschen Kraftfahrzeug Techniker Meister und Sachverständigen! 😘✌️
Shes gonna snap like a twig. 😂
It was a beautiful little truck before. You’d think ‘perfect for inner-city delivery in town.’ But,… no, you want a ‘mega-mover’ for moving mountains. You need at least one axle and four more tires. Have you seen the inner country roads those trucks have to be on? You really need ‘half-tracks’ off a tank. Well, I’ll wait for the next ‘Pakistani-mangled truck repair’ to see our cute little truck brought back to life with a chisel, a hammer and a crow bar.
mazda 3500 ka 32 feet container bnane ka price kitna hi please
03155834665 bhai Ap es no pr call 📞 kr lijye ga mukaml maloomat mil jay gi Amir Body works Amir nam hai ustad ka
Nice
Thanks
Team work at its best and no bulshit time wasting.
Just a little top heavy but nice craftsmanship
It would be better to upgrade to a bigger engine.
that would never happen here in the U S A
👍
🇧🇷 👨🔧👨🔧
GOOD JOB
pmsl it's gonna snap in two
Low egine
👍🙏🤝😎🤕😇