Hi, my vending machine pax kept showing "Starting MDB" after every settlement and hanged. I had to restart my machine to restart the pax at the same time. Do you have any solution to this?
Dear, from your email to us, Your vending machine is installed with other brand mdb converter, so we don't know the exact problems. you can try to change our mdb converter and ask your manufacture to change the design. then can work stable . we also will provide more technical service.
We have the demo PC software to run on the windows PC. User can use the software to send the command to control the MDB payment device and also receive the payment credit data. After user is familar with the MDB protocol and data, then will develop the software in the VMC (normally use the android board to work as vending machine VMC board). If want to know more , can visit the website to read the manual and also download the PC demo test software: www.mdb-rs232.com
@@waferstar I don't quite understand exactly what you mean but it sounds like you are saying that we need an android board to act as the vending machine VMC? But here is what I have set up. I have downloaded and installed the MDB-RS232 Test Tool and have it running on a windows PC. I have the the IM30 connected to PC via the MDB-RS232adapter using a USB-RS232 converter. The MDB-RS232 Test Tool parameters set to baud rate to 9600, Parity to None, and then selected the port that the device is connected to. Questions: The "Cashless device" led is continuously blinking on the MDB-RS232 PC adapter. Should it be steady? I do not see any information being sent from the IM30 to the Test Tool when the IM30 is initially connected. Why is that? Does the Test Tool running on the PC act as the vending machine VMC? Thank you.
Actually looking at your video again, my setup is similar to yours except that I only have an IM30 device. Also from what I see on your PC screen, the interface of the MDB-RS232 Test Tool on my PC looks a little different than the one you have in the video. Can I send you an image of my setup and show you what the interface of the Test Tool on my PC looks like? What is your email address?
What software are you using on the PAX IM20 to perform this test??
Nayax , PAX and also other MDB card reader fully tested , no problem.
Hi, my vending machine pax kept showing "Starting MDB" after every settlement and hanged. I had to restart my machine to restart the pax at the same time. Do you have any solution to this?
Dear, from your email to us, Your vending machine is installed with other brand mdb converter, so we don't know the exact problems. you can try to change our mdb converter and ask your manufacture to change the design. then can work stable . we also will provide more technical service.
Hi. What software do are you running on the PC to act as the VMC?
We have the demo PC software to run on the windows PC. User can use the software to send the command to control the MDB payment device and also receive the payment credit data. After user is familar with the MDB protocol and data, then will develop the software in the VMC (normally use the android board to work as vending machine VMC board). If want to know more , can visit the website to read the manual and also download the PC demo test software: www.mdb-rs232.com
@@waferstar I don't quite understand exactly what you mean but it sounds like you are saying that we need an android board to act as the vending machine VMC? But here is what I have set up.
I have downloaded and installed the MDB-RS232 Test Tool and have it running on a windows PC. I have the the IM30 connected to PC via the MDB-RS232adapter using a USB-RS232 converter. The MDB-RS232 Test Tool parameters set to baud rate to 9600, Parity to None, and then selected the port that the device is connected to.
Questions:
The "Cashless device" led is continuously blinking on the MDB-RS232 PC adapter. Should it be steady?
I do not see any information being sent from the IM30 to the Test Tool when the IM30 is initially connected. Why is that?
Does the Test Tool running on the PC act as the vending machine VMC?
Thank you.
Actually looking at your video again, my setup is similar to yours except that I only have an IM30 device. Also from what I see on your PC screen, the interface of the MDB-RS232 Test Tool on my PC looks a little different than the one you have in the video. Can I send you an image of my setup and show you what the interface of the Test Tool on my PC looks like? What is your email address?
What software do you have running on the IM20? Is that some custom software that you developed?