WASR 10 Romanian AK-47 Series - Part 2 Descriptive Field Strip / Complete Disassembly 101 PITD
Вставка
- Опубліковано 5 вер 2024
- #WASR10 Romanian AK47 Series - Part 2 Descriptive #FieldStrip / Complete Disassembly 101 PITD
A Series covering the Century Arms WASR 10 AK-47 rifle.
Part 1- Descriptive overview covering part names and locations of the rifle.
Part 2 - Descriptive Field Strip and Complete Disassembly - detailed instructions
Part 3 - Reassembly and wrap up
***
This is a part of an ongoing series of descriptive videos detailing firearms and field stripping for the visually impaired. You can check out the full playlist:
• Patriot’s Descriptive ...
Also check out my Blind Challenge Playlist:
• Patriot’s Firearm Blin...
If you have any suggestions, questions or concerns please leave them below. Thanks for watching and make it an outstanding day!
***
I am a proud American, blessed father, a staunch 2A activist and a Marine Corps Veteran that just happens to be 100% blind.
This is a look at the Second Amendment, firearms, self Defense, Constitutionally protected rights, Liberty and Freedom from the perspective of a Visually Impaired, Blind American.
#PatriotInTheDark
If you like what you seen here, please consider showing your support on Patreon:
/ patriotinthedark
www.paypal.me/...
Also check out our Spreadshirt Shop for Swag:
shop.spreadshi...
Also find us here:
u/@PatriotInTheDark
/ patriot_itd
/ patriot_in_the_dark
guntube.org/cha...
PatriotInTheDark@gmail.com
#NeverFearTheDark
Disclaimer: No purchase necessary, must abide by all state and federal laws. Void where prohibited. No Puppies or sighted people were hurt during the filming of these videos.
Thank you for watching. In your opinion, what gives you the most issues while field stripping or completely disassembling a firearm? Please let me know below and make it an outstanding day!
#NeverFearTheDark
Pretty amazing. I couldn't disaamble it that easily and I have 20/20 vision. Think it's awesome how you give directions that would help other blind people too. Good stuff and great video.
Thank you, I hope I can help as many people as possible.
I do appreciate you watching and thanks again
got the same AK and this video has helped tremendously, that dust cover and stock gave me so much trouble lol
I’m glad it helped. Have you checked out the rest of my WASR-10 playlist?
Thanks for watching, I really do appreciate it
Excellent video. Thanks for sharing.
Thx for this!
Thank you bro
Great tutorial for disassemble
Thank you, I appreciate you watching.
Do you think it was described enough to follow along?
Thanks again
@@PatriotInTheDark Yoo did an awesome job describing each step , and how each piece connected together
Nice breakdown as good series.....Good stuff.....
Thanks my friend, I appreciate you watching
👍👍👍👍👍
Amazing detail
Thank you, I appreciate you watching.
This one didn't have a gas tube spring?
Good video but you need better lighting. It was hard to really tell what you were doing a few times.
I appreciate the heads up. I have to revisit this video, I’ve changed my set up a lot since then.
It’s kind of funny, some of my first videos I recorded with no lights on and the screen was totally black. The joy of recording videos with both eyes closed. 😁
Thanks for the input and checking out this video
I have a lip on the tab you press in to get the dust cover off and I cannot remove it just got it from century arms today
Yes, they can be a real pain when they’re new.
My suggestion is, use something that’s hard but will not mark the finish
push the button toward the muzzle. (parallel to the barrel)
Once the “Button“ is past the edge of the dust cover
lift up on the back of the dust cover.
The spring assembly is probably really tight, I usually use the handle of a toothbrush to push the button in.
Sorry I’m not much help, but if you work at it you’ll get it.
Let me know how it goes
@@PatriotInTheDark hey thanks I got it to pop finally with a punch and a little love.
my bolt carrier doesnt come out at all like if its stuck for some reason
That’s interesting. If you’re taking out the bolt carrier, the only thing I can think of would be to make sure to have the safety on fire. If the safety is on, in the up position, that will stop your carrier halfway back.
If not, let me know what other things are going on.
Thanks for checking this out, I do appreciate it.
is it CHF?
I am not familiar with CHF. What is that?
@@PatriotInTheDark Cold hammer forged barrel Chrome Lined barrel
@@2000rayc Yes, it is.
Thanks for answering this, I hadn’t had a chance to check it out.