I use Packet tracer 7.2.0.0.0226 and I cannot do any command that you asked to do for the snmp-server. when i try to enable.it. snmp-server community public ro then i go no message. only change line and come back so S1(config)# and its same problem for any switch or routers. 2960, 1841, 1940, etc etc
David can you teach us snmp v3 for read only and read write.. im so confuse how to config snmp v3 for read only for our client Please advice thanks David
hi David when i open this pkt file it says CPT is not compatible with this version why? could you please tell me which version of Cisco packet tracer you are using?
I just purchased almost all of your courses in GNS3 academy :) though I am missing the GNS3 PT-2 course, ccna voice (640-461) and python netmiko course. though dont know if that (640-461) is up to date.... now my wallet has a huge hole in it. but its for a good deed :) Also I dont know why no one has done a CCNA and CCNP Security, Cyber Ops, Cloud, Service Provider as well as Datacenter courses. - That took me by surprise and in shock.
Would love for you to do them please, ill buy them on GNS3 Academy :) CCNA and CCNP Security, Cyber Ops, Cloud, Service Provider as well as Datacenter courses also there is 1 person who did a security vid, but im being told its a bit dated. and the rest of the courses are not on GNS3 :/
Sir, i wish you personally read comments of this channel because i have wrote a similar comment before and i messaged you on udemy and your assistant told me he will send the message to you. Can you make a video guiding a newbie like me, What to take after CCNA Routing and Switching? Do i have to learn network automation or CCNP or CCNA Security[i want to obtain it]. I do have apx every course you teach on Udemy. And i got lost about what to take next. Best regards,
I unfortunately don't have the time to give individual advice to everyone :( Situations vary from individual to individual, but I'll create a video with some general advice on what to study. CCNP, CCNA Security and network automation are all good - but you need to chose something you enjoy and want to do for the next 5 to 10 years.
That's my point, i finished CCNA routing and Switching. ICND1 AND ICND2.. when to study Network automation? when i reach CCIE level? - In case im aiming on getting CCIE routing and switching and security in the future. So would it be better to take CCNA security after routing and switching? Or take CCNA security after CCNP? I do understand what do you mean you cannot give individual advice to everyone. True. im not asking for that. I mean in general. im planning for Routing and Switching and secuirty. but what to do after the CCNA is what confuse me. While keeping in mind im 26 and i want to achieve CCIE in the next 10 years if possible. Thank you for giving my comment some of your [valuable time] And thanks for the very impressive content got apx all your courses on Udemy. and the content is very impressive. That's why i want a general advice from someone knows what networking and future is. Beside you are very experienced as a CCIE so you know better than many others.
If you meant server, assuming you enabled SNMP-server by using command like "snmp-server community **** RO", you can just put "no" before in in config mode so it look like this: "no snmp-server community **** RO".
4 years later, still relevant and super helpful. You explained everything so well and straight to the point.
Thankyouu for uploading!
Great video Mr Bombal
I use Packet tracer 7.2.0.0.0226 and I cannot do any command that you asked to do for the snmp-server. when i try to enable.it. snmp-server community public ro then i go no message. only change line and come back so S1(config)# and its same problem for any switch or routers. 2960, 1841, 1940, etc etc
David can you teach us snmp v3 for read only and read write.. im so confuse how to config snmp v3 for read only for our client
Please advice thanks David
perfect video thanx a million times bro
hi David
when i open this pkt file it says CPT is not compatible with this version why? could you please tell me which version of Cisco packet tracer you are using?
Please try again - I have updated the link.
I just purchased almost all of your courses in GNS3 academy :) though I am missing the GNS3 PT-2 course, ccna voice (640-461) and python netmiko course.
though dont know if that (640-461) is up to date.... now my wallet has a huge hole in it. but its for a good deed :)
Also I dont know why no one has done a CCNA and CCNP Security, Cyber Ops, Cloud, Service Provider as well as Datacenter courses. - That took me by surprise and in shock.
Thanks Robert! I haven't completed those courses, but other authors have.
Would love for you to do them please, ill buy them on GNS3 Academy :) CCNA and CCNP Security, Cyber Ops, Cloud, Service Provider as well as Datacenter courses
also there is 1 person who did a security vid, but im being told its a bit dated. and the rest of the courses are not on GNS3 :/
Check on udemy.com - there may be more courses there.
Awe....lol - oook :) - I was hoping I could have it all in one site location.
Sir, i wish you personally read comments of this channel because i have wrote a similar comment before and i messaged you on udemy and your assistant told me he will send the message to you.
Can you make a video guiding a newbie like me, What to take after CCNA Routing and Switching?
Do i have to learn network automation or CCNP or CCNA Security[i want to obtain it].
I do have apx every course you teach on Udemy. And i got lost about what to take next.
Best regards,
I unfortunately don't have the time to give individual advice to everyone :( Situations vary from individual to individual, but I'll create a video with some general advice on what to study. CCNP, CCNA Security and network automation are all good - but you need to chose something you enjoy and want to do for the next 5 to 10 years.
That's my point, i finished CCNA routing and Switching. ICND1 AND ICND2.. when to study Network automation? when i reach CCIE level?
- In case im aiming on getting CCIE routing and switching and security in the future. So would it be better to take CCNA security after routing and switching? Or take CCNA security after CCNP?
I do understand what do you mean you cannot give individual advice to everyone. True. im not asking for that.
I mean in general. im planning for Routing and Switching and secuirty.
but what to do after the CCNA is what confuse me.
While keeping in mind
im 26 and i want to achieve CCIE in the next 10 years if possible.
Thank you for giving my comment some of your [valuable time] And thanks for the very impressive content got apx all your courses on Udemy. and the content is very impressive. That's why i want a general advice from someone knows what networking and future is. Beside you are very experienced as a CCIE so you know better than many others.
running latest PT version but still says incompatible file.
Please try again - I have updated the link.
You told us everything, except how to disable SNMP service on Cisco router, so I don't have SNMP on router at all....
If you meant server, assuming you enabled SNMP-server by using command like "snmp-server community **** RO", you can just put "no" before in in config mode so it look like this: "no snmp-server community **** RO".
this doesn't work on switches?
How password on routers?
Nice lab...
👌💜💜💜💜💜