I've been searching for designs for a BSFL bin after finding them in my kitchen scraps bucket outside and this video was just what I've been searching for. I love that there wasn't a whole lot of extra fluff in the video, he was quick, and demonstrated that it doesn't need to be exact. this video was perfect for me so thank you very much for uploading it
Thank you so very much for sharing!!! This is exactly what I was looking for to start breeding black soldier flies. The commercial ones that I have found available in the United States are way too expensive. I am definitely going to get started on mine. Once again thank you very much for sharing. Please ignore the haters, they have no life.
You could put the reinforced tubing in place without the zip ties, then get a marker and mark where the "topside" (or holes) would be, then remove it and cut the holes, then put it back in and zip tie it in place. It would be cool if this guy could travel to hardware stores that sell all the parts, and sell soldier fly larvae, while helping the store sell all the non-larvae parts. Seems like a benefit for both. They could setup with all the basic stuff and offer to cut it (by a store employee who would normally cut it anyway) for whoever wants it. The only part missing would be putting the holes in the trash can, but they could offer to sell the hole-saw bits and drills on display for convenience or maybe someone could offer to cut them for people for a small donation, maybe $1-$3 per bin, limit 1 per person.
Yea, I would totally redo a shorter version and link it to the first part of this video. You have enough views at this point and this is a really great idea I haven't seen any where else. Hit me up if you need help editing it down. We would love to share a shorter version of this video on our platform.
love this ... the only thing I would do differently is the fly entry point. I would glue an upturned yellow bowl over a pipe with holes ( bit like the eco flycatcher that you can buy) The yellow attaracts flies, does it not?
Using waste bins with wheels that can be tipped sideways to get the 30 degree angle...brilliant. Why buy an expensive biopod when you can get a larger wheeled unit for cheap.
Have you had any success in drying the BSF grubs for storage/use in winter months production slows? I've created a fairly efficient BSF harvester AND in the past I've purchased "naturally dried mealworms" as treats for my chooks so I figure it must be possible just not real clear on how to do the drying and preserving part of them....any advice would be appreciated~Thanks!
Interesting idea. I imagine one of those freeze dryers would do a perfect job. I think with some trial and error once could come up with a plan that would work if you have any summer heat at all.
Why dont you just cut the slots before installing the tube inside the bin for the worms to crawl out. It's much easier and also reduces the risk of hurting yourself. Otherwise pretty cool.
Kudos to Gavin for a good modification to my tube harvesting system, however I think there are few significant shortcomings to this design; insufficient ventilation, no larvae barrier (the larvae will climb the walls and escape from under the lid), the filter system seems prone to clogging, and the drain outlet as shown will probably leak. I also don't understand the appeal of rushing the build. Good effort, but I do not think this unit is the equivalent of a BioPod.
+whiteflag If you do, you don't have to worry about house flies. Other flies avoid laying their eggs where Black Soldier fly larvae are present. I can't say whether or not pathogens can survive the process and whether they are a concern as I genuinely don't know.
Neat idea, but not everything is appropriate for a 30 minute UA-cam video. Would be a good thing to put on Instructables or a similar site as a photo description with supply list, clear description, etc.
Mr. Smith sadly proves the fact that just because you know how to do something well, it doesn't mean that you necessarily will be good at showing others how to do that same task. He seems intent on proving that it can be done quickly and without a lot of measurements, but neglects letting his students in on the details of construction. Even the simplest of devices needs to adhere to SOME basic rules of construction just to make sure it functions properly and holds together. He is acting as if his students already know how to build one of these fly bins and just are there to see him go through the motions as if he is in a race of some sort. Regretably, 2 thumbs down for Mr. Smith and his amazing fly hatchery dust bin.
Good Lord, what is your problem? Absolutely nothing to do except bash someone. If you don’t have anything good to say don’t say anything at all!!! Especially if it really doesn’t concern you.
That's just how my dad makes things. He gives people the approx. measurements. He assumes people have a level of intelligence and can guesstimate themselves and apply trial and error. His approach is that it doesn't have to be perfect. If you want one with all the measurements and everything perfect, go and pay someone $50 or so for it, I guess...or just keep scrolling and find something from someone you prefer. Best wishes and good luck in your search.
I've been searching for designs for a BSFL bin after finding them in my kitchen scraps bucket outside and this video was just what I've been searching for. I love that there wasn't a whole lot of extra fluff in the video, he was quick, and demonstrated that it doesn't need to be exact. this video was perfect for me so thank you very much for uploading it
Precisely :)
Thank you so very much for sharing!!!
This is exactly what I was looking for to start breeding black soldier flies.
The commercial ones that I have found available in the United States are way too expensive.
I am definitely going to get started on mine.
Once again thank you very much for sharing.
Please ignore the haters,
they have no life.
You could put the reinforced tubing in place without the zip ties, then get a marker and mark where the "topside" (or holes) would be, then remove it and cut the holes, then put it back in and zip tie it in place.
It would be cool if this guy could travel to hardware stores that sell all the parts, and sell soldier fly larvae, while helping the store sell all the non-larvae parts. Seems like a benefit for both. They could setup with all the basic stuff and offer to cut it (by a store employee who would normally cut it anyway) for whoever wants it. The only part missing would be putting the holes in the trash can, but they could offer to sell the hole-saw bits and drills on display for convenience or maybe someone could offer to cut them for people for a small donation, maybe $1-$3 per bin, limit 1 per person.
An excellent video of how to make a black soldier fly composter.
Enjoyed your video
if i may suggest, a pvc cutter, that works like a plier, may save some time. Thanks for the video.
Idea at 15:00...brilliant
nice work bench
Yea, I would totally redo a shorter version and link it to the first part of this video. You have enough views at this point and this is a really great idea I haven't seen any where else. Hit me up if you need help editing it down. We would love to share a shorter version of this video on our platform.
love this ... the only thing I would do differently is the fly entry point. I would glue an upturned yellow bowl over a pipe with holes ( bit like the eco flycatcher that you can buy) The yellow attaracts flies, does it not?
Using waste bins with wheels that can be tipped sideways to get the 30 degree angle...brilliant. Why buy an expensive biopod when you can get a larger wheeled unit for cheap.
Thanks
awesome!
How's your harvest. I think you would have a lot of pupation inside the bin?
Hi, thank you for the video. A question: how much is such a system smelling? I live in an apartment and I planned on putting it on my balcony. Thanks!
Have you had any success in drying the BSF grubs for storage/use in winter months production slows? I've created a fairly efficient BSF harvester AND in the past I've purchased "naturally dried mealworms" as treats for my chooks so I figure it must be possible just not real clear on how to do the drying and preserving part of them....any advice would be appreciated~Thanks!
Interesting idea. I imagine one of those freeze dryers would do a perfect job. I think with some trial and error once could come up with a plan that would work if you have any summer heat at all.
Why dont you just cut the slots before installing the tube inside the bin for the worms to crawl out. It's much easier and also reduces the risk of hurting yourself. Otherwise pretty cool.
Kudos to Gavin for a good modification to my tube harvesting system, however I think there are few significant shortcomings to this design; insufficient ventilation, no larvae barrier (the larvae will climb the walls and escape from under the lid), the filter system seems prone to clogging, and the drain outlet as shown will probably leak. I also don't understand the appeal of rushing the build. Good effort, but I do not think this unit is the equivalent of a BioPod.
Nope but a lot cheaper
What is so brilliant about it?
Do you put meat in this as well?
+whiteflag If you do, you don't have to worry about house flies. Other flies avoid laying their eggs where Black Soldier fly larvae are present. I can't say whether or not pathogens can survive the process and whether they are a concern as I genuinely don't know.
I've lost my bloody fingah!
Neat idea, but not everything is appropriate for a 30 minute UA-cam video. Would be a good thing to put on Instructables or a similar site as a photo description with supply list, clear description, etc.
Edit this video please.
is this for real? niga please
Mr. Smith sadly proves the fact that just because you know how to do something well, it doesn't mean that you necessarily will be good at showing others how to do that same task. He seems intent on proving that it can be done quickly and without a lot of measurements, but neglects letting his students in on the details of construction. Even the simplest of devices needs to adhere to SOME basic rules of construction just to make sure it functions properly and holds together. He is acting as if his students already know how to build one of these fly bins and just are there to see him go through the motions as if he is in a race of some sort. Regretably, 2 thumbs down for Mr. Smith and his amazing fly hatchery dust bin.
I mean, it is pretty simple what he is demonstrating.
Good Lord, what is your problem?
Absolutely nothing to do except bash someone.
If you don’t have anything good to say don’t say anything at all!!!
Especially if it really doesn’t concern you.
That's just how my dad makes things. He gives people the approx. measurements. He assumes people have a level of intelligence and can guesstimate themselves and apply trial and error. His approach is that it doesn't have to be perfect. If you want one with all the measurements and everything perfect, go and pay someone $50 or so for it, I guess...or just keep scrolling and find something from someone you prefer. Best wishes and good luck in your search.