would work on your gas bottles too, vent some gas pressure change will change the temp in the bottle. You can already get similar things for lpg bottles
I’ve been using these for a good few months here in the UK work lovely but here in my brewery/garage in winter it’s cold anyway so I’m still filling on condensation and weight. Great tip though putting your hand on it. Nice one cheers from over the pond 👍🍻
Awesome, weird how these things just suddenly pop up, and then others have been doing it for ages, happens all the time doesn't it, Cheers mate, have a great Christmas!
I prefer filling into an already cold keg to prevent foaming and limit loss of carbonation. Also I just place it on a weigh and watch the exact amount.
There’s no real need to chill,the keg, that was an old thing about filling bottles with carbonated beer without counter pressure. Saying that I tried chilling bottles once then worked out that it didn’t make any difference when I didn’t chill it. I’ve never had a beer foam filling a keg. Cheers!
Yep been using these for 6
Months I would say, seen someone on the Facebook pages that had used them.
That looks really handy. I'll add to my next kegland order.
Cheers mate!
I did this same thing a couple months ago. chopped up the sheets and have it on all my kegs
Good stuff!
Great shirt mate, also really good to see you putting more videos.
Thanks mate, cheers!
Works on propane too.
Thanks mate, did you know that we don't call it Propane here, its called LPG (liquefied petroleum gas) trivia hahaha
would work on your gas bottles too, vent some gas pressure change will change the temp in the bottle. You can already get similar things for lpg bottles
Used to use hot water 😂 in the old days
Thank you. Great idea
Thanks mate!
Great idea mate. 🤙🍻🇦🇺
Thanks Mate!
That stuff is a beauty 👍.
Cheers mate!
What might it look like if you hit it with a hairdryer while cold instead of your hand? Good stuff! 🍻
yeah would probably work!
@HomeBrewNetwork film a short? 😁 Very curious lol cheers!
I’ve been using these for a good few months here in the UK work lovely but here in my brewery/garage in winter it’s cold anyway so I’m still filling on condensation and weight. Great tip though putting your hand on it. Nice one cheers from over the pond 👍🍻
Awesome, weird how these things just suddenly pop up, and then others have been doing it for ages, happens all the time doesn't it, Cheers mate, have a great Christmas!
@ 👍🏼🍻🧑🎄
I prefer filling into an already cold keg to prevent foaming and limit loss of carbonation. Also I just place it on a weigh and watch the exact amount.
Yep, this needed to be said.
I've never had FOB or foaming issues or a need to chill a keg, just has never been an issue at all, 100s of kegs worth. Cheers!
I chill my keg down to the same temperature as the beer before I do my transfer. I'm guessing this would not work in that situation.
There’s no real need to chill,the keg, that was an old thing about filling bottles with carbonated beer without counter pressure. Saying that I tried chilling bottles once then worked out that it didn’t make any difference when I didn’t chill it. I’ve never had a beer foam filling a keg. Cheers!
Is it reusable. As in next keg fill it will continue to work or have to replace
Yep just leave it on there
you should have put a Patent on it.
ha! lol
Patent take about 2 years to action
nice one :)
Thanks for the visit
not the point of the video, but that is an absolutely deadly nsw shirt.
on the topic of the video: these are a GREAT IDEA
It was from here www.yarn.com.au?p=XLN7cn_vW just search NSW on it
Good shout! But just sticker the top 3 or so inches, waste of product really
well did you get to the end? its really handy...