BOLTR: Bosch Screwdriver
Вставка
- Опубліковано 13 гру 2024
- Interrupting the prevailing fear and loathing to bring you the guts of a tool.
Also, Masks Don't Work: A review of science relevant to COVID-19 social policy www.researchga...
addendum: One of the beautiful side effects of considered discussion is that when I post a un-intended strawman it underlines the mis-understanding of a situation. Now it's plainly evident that a mask would help keep one's sneezes contained but how does that really help? Most people wearing a mask have no fucking clue how to use it. Smearing monkey shit all over their faces, scratching, adjusting, pulling aside to talk, going around spittle barriers because they are protected by the virtue signal of sandwich artist gloves and a mask yanked down to allow them to be clearly herd. You need training and diligence to use a mask effectively, otherwise it's little more than kabuki.
I bought one of these in Vietnam last year. Unfortunately I don’t have a Bosch nano saw so the screwdriver remains unopened.
Lmao
Don’t you mean Borche? Haha
"Shipping damage", didn't know you named your letter opener.
I also thought it might be letter opener related damage. I still have't found an excuse to buy one of my own.
@@shiruba2004 You need an excuse to buy a small chainsaw? One would think the existence of one would be more than ample reasoning.
@@Rudofaux I just have this feeling I would mainly use it to open Amazon boxes like this guy...
@@shiruba2004 3
Opuuijoji
if you looked like me AvE you'd want to wear a mask too.
Oh that's the cute. (Remember, people are strange enough that some folks think you're pretty, even when you aren't one of them.)
Highlights those pretty baby blues.
You lucky bastard! I am so ugly, that even with full face mask on, my neighbors blind children are terrified when ever I go out side and they live 5km away, behind a dense forest.
I've got the same problem- a face for radio and a voice for silent film. 😕
@@mrrobotobrains i wear prescription sunglasses at all hours.
6 in German is pronounced “sechs”, near indistinguishable from “sex”. Suitable choice for stiff things to shove into weird places.
It definitely made playing Seeschlacht(Battleship) in German class giggle inducing while also assuring that nobody ever placed a ship at G6 due to it inevitably being guessed during every game.
In Swedish 6 is spelled and pronounced sex.
@@josasp as it is in Icelandic (but curiously not Dutch, Norse or Faroese, where it is spelled 'seks' instead). I pointed out German in particular because that's where Bosch is from... (though that thing surely looks like it is at least inspired by Dremel products which they apparently now own).
LOL geile Erklärung. xD
Years ago in my middle school German 1 class we first learned the alphabet, then how to count to 100, and then discovered that the phrase "G-11-6" is hilarious.
Who else thought that the first time that switch got launched into a low earth orbit was the last time you would ever see it?
Kudos for retrieving it from the great beyond - several times.
I think he’s cheating! Only the bench is clean and he’s faking it!!!
Me. I was completely shocked when he just casually pulled it out to reinstall and I just sat staring as he launched in properly into orbit that second time. Having already been through it though, I was basically prepared for the 2nd return of the unloseable switch. ;)
**edited because autoderp**
You take enough stuff apart you get better at following the trajectory
Or you spend more on parts, screws & doodads.
it bounced off his eye ball and landed on the bench
AvE: "I'm all about the base 10 system"
also AvE: Uses units of 127/5 mm instead of base 10.
As a German, I absolutely appreciate how you curse in german language. It's truly beautiful, and causes some good laughter as well.
IT VORKS !!!
Haha yeah its awesome. He always saying something funny in French. I think its hilarious lol
Nothing quite like swearing in German. My wolfsburg Jetta behaves better when i do lol
AvE, masks aren't to stop the wearer from potentially inhaling 'viral particles', although they can certainly do that. The efficacy of masks in containing the spread of a virus has nothing to do with the size of the viral particle itself, and everything to do with the size of a droplet containing respiratory mucosal secretions (and viral particles). The viral particle itself has no chance of withstanding the extremes of the outside elements with its tiny protein coat. It easily succumbs to the effects of osmosis, at the very least, to dry out and become ineffective in attaching/penetrating cell membranes and replicating. Thus, anyone who dismisses masks based on their efficacy in mitigating the movement of a single viral particle can be safely dismissed. The efficacy of a mask lies in its ability to decrease (not eliminate) the transfer of previously mentioned respiratory droplets from an infected patient to surfaces that non-infected people may come in contact with.
With that said, the mortality rate of COVID-19 is very very low in non-vulnerable people (below 65 years of age, not immunocompromised, no pneumonia, etc.). The way we've handled this, IMO, is atrocious. We could've done a much better job, and saved more lives, by not causing mass panic and simply allowing non-vulnerable people to continue regular lives while affording extra protection and isolation for vulnerable people. In the process, we could've rationed healthcare resources and distributed them in a more efficient manner. In order for that to work, we would need good social distancing in public, the normalization of masks in public, more testing, the closure of the international border, and educating people about the danger of coming in contact, under any circumstances, with a vulnerable person. Had all of that been done, we could've eliminated the need for mass lockdown, in lieu of regional lockdowns when necessary. Look at China, Taiwan, Japan, Korea, Singapore, etc. None of them had a nationwide lockdown. Instead, we've used Italy, Spain, and other such countries as role models.
Then again, here in Canada, Justin Trudeau appointed someone with very little knowledge of public health to be the health minister (Sajdu) through a cabinet reshuffle, and our leading physician on COVID-19, Dr. Tam, was against border closures for months, she deliberately lied to the public (instead of actually controlling the supply chain) about the efficacy of masks, going as far as saying that they're not useful, in an effort to ration them for the healthcare industry. IMO, what Dr. Tam did amounts to criminal negligence, and she should be in jail right now. I can't imagine the number of cases in Canada caused by her. Imagine all the people who were infected and used public transit without wearing masks, spreading the virus on every surface they touched...
The article linked in the description is self-published by former physics professor Denis Rancourt, under the auspices of the Ontario Civil Liberties Association. He was dismissed by his previous employer, the University of Ottawa, for numerous subversions of the university's academic integrity. These included unilaterally changing the content of one of his courses, advertising another course he taught as being free despite it being a fee-taking course per university regulations, and giving every student an A+ in another of his courses regardless of their actual competence.
Physicists have a time-honoured tradition of speaking authoritatively on topics they have zero expertise in. Having a PhD does not make one immune to the Dunning-Kruger effect, and I'm afraid this is exactly what is happening here.
Thank you! Now that is great info, but can we find any research indicating home-made masks ARE effective in actual use?
Link some sources going against the claims. Please dont link cnn experts geta and bill though.
@@arduinoversusevil2025 ua-cam.com/video/rqu2I0x0UC8/v-deo.html There's a link in the doo-ebly-doo (Did it do that right dad?) to the sources.
(Its a video about the new mask recommendations, in the description there's some links to the sources of said video, might be useful as a further lead)
My understanding is that the mask is to protect others from the potential shedding and not the wearer.
@@arduinoversusevil2025 Masks aren't to stop you from breathing in microscopic viruses, they're to stop small droplets of potentially contaminated saliva and nose schmoo from getting onto other stuff.
As a farmer I just wanted to say that you're entirely right about us just moving shit around from one place to another, and back again. The best tool we ever acquired on our farm might just be a mediocre old forklift because let's face it, material handling is what we actually do. The plants are doing all the tricky work of turning sunlight into something for a rainy day, we're just chasing our tails trying to keep up with them.
I just wanted you to know you were right about something since 2020 has been such a crap year to date :-)
i love how you bought the mini chain saw as a joke and have fallen in love with it
I want one for opening water heater boxes . I ruin more razor blades on those fibrous boxes than I want . And besides , it's very fashionable to open such boxes in the customers driveway with professional gusto . Passing by fellow tradesmen would turn green with envy at such luxury .
I bought one based on that video. They are actually really good. They can plunge and I have used it to cut out the hole for the sink in a kitchen counter top. It had no problems with that.
It's a micro electric chainsaw.... that is awesome. If you don't like it and you can't appreciate that cute little chain on it. I would say you just have poor taste.
Why no one else has manufactured their own version is surprising too.
We all fell in love with that tiny chainsaw... it sawed right through the bark of my gnarly wooden heart!
There is a sabersaw version of the same one as well. easycut50 on amazon.co.uk
Re: foreskin eyelids - think of the foresight!
Do you still go blind if you... you know...?
I heard his wife say he was also shortsighted
The morning eye gunk must be brutal
@@freebirthfreddy rub your eyes?
Maybe worry more about his buddy with the hindsight...
1:05 - 25th of may and lilacs?? "Truth! Justice! Freedom! Reasonably Priced Love! And a Hard-Boiled Egg!" - Terry Pratchett.
“No one is finally dead until the ripples they cause in the world die away, until the clock wound up winds down, until the wine she made has finished its ferment, until the crop they planted is harvested. The span of someone’s life is only the core of their actual existence.”
GNU Terry Pratchett
GNU Terry Pratchett
I looked to see if someone noticed and posted so that I would not have to. nydamprintsblackandwhite.blogspot.com/2015/05/lilac-towel-day.html
This should be the top comment.
Good to see there's other like-minded people here. Also: GNU, Sir Terry.
Caught an error. 1:53 he says "wall receptacle" instead of "walrus testicle." All that Spring soreness I guess.
7 is too fast.
I can't believe you didn't know that.
What the German version of “This is Spinal Tap” ...it goes to 7!?!
EVERY dial should go to 11. Everywhere everyone knows this.
And 5 is too slow
Because 7 ate 9.
@webnothing Everything is 4.
Let me try to explain the 1 to 6:
Why bother? (Also known as "paid by the hour") - 1
Dead slow - 2
Slow - 3
Half - 4
Full - 5
All she'll suffer - 6
Sure, but it's not a speed control, it's torque control.
I'm fairly certain my father inherited a tub of generic grease from his dad that I will in turn inherit when the time comes...I doubt anyone alive today has bought one of those tubs new.
I seem to remember an episode of "Dirty Jobs" where Mike Rowe was hand-packing wheel bearings on an 8x8 HEMTT out of a big tub of grease. Because, yeah, the government would still do that...
I've bought a couple of tubs new and in different colors but I also have that same tub of inheritance grease. It was in a red and white flannel patterned can and when the grease is pulled apart I swear I could see horse hair in there.
Of course not.
It's called gasoline today
The Les Claypool reference! "Those damn blue collar tweekers." 👌
3:00 Bumblefack cuts through the case with a saw then claims "shipping damage" on the tool. LOL
Just wanted to comment this...
It was in jest if you didn't realize. He's done the same before.
Wearing a mask is destroying the facial recognition industry. We should all wear masks, glasses and use vpns
None of those are true protection.
I'm gonna shave one eyebrow off, right now. See if big brother can see me now!
@@mjpeeved only if you then glue it to your other cheek
@@mjpeeved Don't forget to limp! Gait recognition hates it!
@@MrTaxiRob Upper and lower brow on one eye is definitely the anti establishment move.
Glad to see you haven't washed your hands since cleaning out that chicken coop. Nothin fortifies the immune system like a little salmonella.
I looked up on the US CDC website four the number of people that die from Salmonella, calculated that as a percentage of the US population. I forget if I got to 4 or 5 numbers after the decimal. Then I quit worrying about Salmonella.
@@rex8255 don't quit worrying about it just don't be a dirty fuck
Always worry about salmonella. I have had it and I don't wish that on my worst enemy.
Sam and Ella’s is(was?) a fried chicken restaurant in Tahlequah, OK. It’s Cherokee for can’t get there in the interstate.
I thought it was paint???
2:29 ‘बॉश पावर टूल खरीदने के लिए धन्यवाद’ translates to ‘Thank you for buying a Bosch Power tool’ in Hindi.
Why would it be in Hindi in Canaderp? Or is AvE secretly filming these in a sweaty workshop in Mumbai?
Become a patron and he’ll give you a personal sweatshop tour!
Ave trying to read hindi. 😁
@Not The Technician Bosch has dominated Indian market since 1922.
jesus ave, if that citation is an argument from authority then two things to consider: rancourt is not an epidemiologist, and he is a crackpot with a long history of controversial opinions. rather than some guy who was fired from his university, im gonna go with the CDC recommendations.
"Its not a fault, its a feature"
You, uhh, worked at Bethesda lately?
😂🤣🤣🤣
Fallout 76 ? Lol
I live a 45min north of Bethesda. I try like hell to stay out of the great state of Montgomery county. But still a resident of the P.R.O.M the ( people’s republic of Maryland)
Bethesda is bethetic.
As i watch my wife yell at the tv when the playstation crashes and her Skyrim data is lost
German in Germany here. No one knows why they dont go to 11.
then Germans crap on the imperial system
How many gears you have in car?
@ any german car. Mostly you wil find it 6 speed. So that number is taken to otheres stuf what have gears.
@@semirsemir7016 every German car I've worked on was either a 3 or 5 speed
@ Cars in germany almost always have 6 gears, most of us drive clutch not automatic and those usually have 6 gears (1 to 5 and R not PNDR like in an automatic).
Karen is the lady at a store being asked to wear a mask who then demands to see the manager while some poor kid behind the counter just wants to end his day.
and possibly his life, because Karen.
Ironically Karen is also the lady knocking on your car window before you go into the store to ask why you don’t have a mask on yet...
I bought some Bosch screw bits years ago, and they were actually the best bits I ever used.
You may be interested in the DeWalt DCF682N1
I do a lot of work with screws in plastic and rackmount screws and the gyroscope control makes it easy to avoid crossthreading and when the screw bottoms out, the small shock to the device makes it stop turning. I've been impressed with the control I have with it. It certainly doesn't have the power of an 18V tool, but for what it's made for, it's well done.
From the promotional material in the images on Amazon...
"Diminutive Figure Full of Strong Power", "A Simple Push, A Perfect Screwing!"
I'm not sure what they're trying to sell here.
I bought that screwdriver under the Dremel brand name to drive in inch and a half hex screws on cable clips at work. I used that screwdriver 5 days a week every week and it is by far my most favorite tool as it pretty much negated the need to be running back and forth grabbing the impact driver, and when youre working out of a tool belt you want the smallest lightest tools possible to get the job done quick. and save your back. i loved how i could hold the screw with my index finger, hold the driver with the rest of my hand and still have my other hand to hold the cable tight against whatever surface was driving into and it never let me down.
it did break after about 2 years of use, one of the bearings popped out of place and jammed the clutch but i took it apart as you did, put the bearing back in place, regreased it, and put it back to full time use like it was brand new.
I ALSO used my Bosch screwgun to assemble MY hentai robot as well.
@Am I 👍🤣🤣🤣
Still waiting on my ' Cherry 2000 '.🤪
"get a whiff of that!" Yeah, I have a can of grease that looks like that. I keep it in a grocery bag, wrapped in two more grocery bags, and sealed with a trash bag. Opening that can sends people out of the room gagging lol. Great grease though.
8:05--thats a shunt resistor to mesure the current to calculate the torque
the potentiometer regulates the torque not the speed.
the switch with french name reverse the motor . all the current pass thru the switch.
i had one of these first thing that fails is the tactile switch
then the motor shorted,,...
battery great when new after 1 month dies quickly.
Can cofirm, wrapped my laptop in saran wrap to protect me from catching the covid on the internet. Works like a charm. Haven't gotten sick yet.
I heard you also have to throw your tv out the window as far as you can. That should help flatten the curve.
@@christophermullen8443 Radio mufflers are key.
So I went to look this up on Amazon and one of the pictures says "A Simple Push, A Perfect Screwing!"
And all the weeble wobble wollored out screwed holes one could ever imagine asking for
Sounds a lot like the politicians in my country.
"Sorting fly shit from pepper with boxing gloves on"
Thanks for the shoutout!!
"That's funny, there's a delay while the brain-box decides whether or not to chooch."
I love it when my favorite UA-camrs support my mental health issues.
F
Hey I thought he was talking about me
@AvE The masks are not there to protect yourself, they are there to protect others. The masks filter some, but not all of the water particles so they are not effective as a safety device for yourself. the main problem not being the material it is made of, but the fact that they do not seal against your face. As you can see, the masks look the same as the ones worn in an operating room. The mask a surgeon wears is not to protect himself, but to protect the patient. It contains saliva droplets in his breath so they don't land in the open wound. The masks they urge you to wear have the same function. The best prevention from being contaminated is keeping a distance. You need to keep distance, so any water droplets from someones breath have time to fall on the ground. The mask you wear reduces the amount of water droplets that go into the air, and any water droplets that get out will have a lower velocity and will travel less far before falling on the ground. And that is why masks DO work. During the incubation period, or when you are asymptomatic, and you don't know you have the virus, the masks saves the people around you.
11:42 Such a coincidence: he's a grown-ass man and a grown ass-man.
Don’t EVER apologize for a rant. Both side of this situation rants, each one thinking they COMPLETELY correct. Once in a while, you come across a pearl. Thnx.
I am from Coimbatore. The place u tried to read off of the service directory.
Small world. 👍
When's the last time your place of living has had such great recognition and as the uncle bumblefuck bumblefucking the name of your homeland?
He's not the only one to mispronounce it! I traveled through the South of India for a month, pretty much by train, uber, and ola, must have seen the name a couple times at a couple train stations, and mispronounced it, myself!
"The superior gripping power of a Robertson"
I suppose Torx is just a joke to you Canadian fellas?
Torx is ok, until you strip it. Robertson strips into philips for some reason, so you can get it out with that. So you get 2 screws for the price of 1
@@collinbarker I have never stripped a Torx screw, only damaged my bits when I didn't have the exact right size on hand.
@@schwuzi Torx are also still quite rare, usually only seen as deterrent screws for electronics, probably due to the existence of the others. Philips are used everywhere still (thanks usa...) while robertson are used in woodworking and are the ones sold in bulk. Torx would have to be ordered in.
At least we no longer use common slot, which are the worst by far. Also, I think robertson manufacturing is easier than torx, as robertson was made by someone who said "Philips bad and stabby" and copied the process they used to make screws. At one point, they were going to be used in cars, but the license got messy, so it was dropped, and so NA is stuck with philips everywhere.
Robertson also allow the screwdriver to be slightly wonky and still work. I have used some torx screws, and they are much less tolerant of what angle the driver to screw can be
Torx is for pricey screws. Robertson is also known as 'Nasa drive' apparently.
pozidrive = phillips (for self-centering) + Robertson (for grips)
Yet you can't get either side of the border on board.
IKEA’s $13 screwdriver has an all metal gearbox, just sayin
My $14 hypertough can change from a cordless screwdriver to a cordless drill in mere seconds!
Have you guys just bragged on IKEA and Walmart? That's like the kid on the short bus saying his helmet can be used for biking too. Your still on the short bus.
@@calvins1837 gold
@@calvins1837 Never I use a helmet, do I. Fine I am. No dain bramage here!
so does the 5 dollar (cambodian dollars!) hyper tough 9 wolt screwdriver, it's actually very good for 5 busks
"Tappy tap..." was my favorite part.
could the shipping damage have something to do with that exact part of the thing being right under the toolpath of your jumped up boxcutter when you opened er up?
This is like the Black and Decker Versa I purchased in 1991, batteries no longer available. Worked like a charm with a clutch that worked perfectly on small screws as I worked on printers and fax machines all day everyday. No circuit board inside, just a motor, slide switch and similar but bigger gear box, battery is removable from outside. I would love to find a battery for it.
I just cleaned all the grease that has hardened, re-greased it and tested it with an external power supply, still works after been in storage for 19 years.
"Sorry bout the rant" the rants are why i come here
they are not listening or care
Good to see you observing the 25th. Justice! Freedom! Reasonably Priced Love!
Shoutout to Uncle Bumbleforks from z Indian subcontinent!
Cheers Rishi! Booze ban still in effect? Or only some provinces? Poor bastards.
@@arduinoversusevil2025 still is largely. States were very keen to lift em and did for a couple of days early this month, cuz perversely enough, it fills their coffers just like with tobacco & automotive fuels. Lines stretched literally for kilometers!
Many states reopening now.
P.S.: You've been a teacher and given inspiration! Keep up z good work!
I guess no one is immune. AvE has finally succumbed to what ails the world.
“Shipping damage” even though he opened the package with a mini chainsaw! 😂😂 that’s why I love AvE
I have a Hitachi cordless power screwdriver that I used to put together a gazebo with over 1000 M10 hex-head cap screws, and I was very, very glad of it. Much lighter than a drill, and the clutch was very precise. I also strongly recommend Wera Hex-Plus bits when driving head-head cap screws - once I switched to those bits I had no trouble at all.
The Dremel unit looks exactly the same this one, but its about half the price. And when I say exactly the same, I mean they are the same unit
Thanks, I wouldn't have known about the Dremel version. Edit: Unfortunately it looks like the Dremel version is limited to North America or something. Though it looks like there's a second generation version of the Bosch Go, the Go 2. Difference being it has a mechanical clutch, a button as well as the push to go and an electronic brake.
Hardly surprising since Bosch bought Dremel way back in 1993. Dremel has better customer acceptance than Bosch in Norte America so that's the label they stick on 'em there.
No surprise there, considering Dremel is a subsidiary of Bosch. Here in Germany, the GO was never released as a blue ("Professional") version. Instead Bosch renamed it to "PushDrive" and released it with a green casing, which is basically the home gamer segment of Bosch power tools. Ultimately, I think this is all just marketing and brand recognition to appeal to the biggest audience because there are people who will strictly ignore products of a certain brand. Also, because certain brands are more wide-spread than others in certain countries.
@@RobEDC does the GO have metal gears also?
@@Tsagos Can't say for sure, but I'd be willing to bet that the Bosch GO, Bosch PushDrive and Dremel GO are absolutely identical when it comes to the inside components and that the only difference between all three just is the color of the plastic housing.
You always inform and entertain me at the same time, that's why I continue to watch your videos. You are extremely knowledgeable and have a great sense of humor, thank you for sharing your experience and expertise with us!
5:57 You didn't warn me about putting my safety squints on!! OSHA is gonna hear about this one...
Oh man you make my day!!! Seriously, your my one stop shop for useful information and comedic relief
Yeah, but he had amazing foresight
I took apart the classic stick shaped version of the black and decker nicad based screwdriver when it broke. the gears were metal back then, don't know about now. It certainly lasted longer than I expected considering I used it to fix a deck, and decking screws are no joke.
Got one (bought in Peru !), the wheel dosn't control the speed, it's for setting the torque.
I know it goes against the grain, but sometimes the FM needs reading :-)
Makes sense. I have the one that adjusts the torque on the front like a normal drill
Burn the reader
About time you did a BOLTR again - been missing these
“Roboticized hantai dolls...”
*My Freshman year roommate has entered The Chat*
"Sorting a fly shit from pepper with boxing gloves on"
One of the better ones I've heard
Theres the mini chainsaw, thought he broke 'er
Yep it must be time for another BOLTR
This time a Bosch wrench
with that unique plastic stench
Hence the lilac to make it more kosher.
I'm not German, but I'm guessing the 1-6 dial may be because 180 is divisible by 5, given that 6 marks means 5 arc segments on a rotary dial.
I actually got an aunt Debra but everyone calls her Bob
Your Random Rants are super hilarious, I thoroughly enjoy your specific choice of words. Keep up the Great Work!
Could somebody please tell me what "BOLTR" stands for/means, etc ? I've been wondering for some time.
Bored of lame old tool reviews.
Bored of lame tool reviews - because tsatchsc doesn’t roll off the tongue (taking stuff apart to see how she chooches)
Thanks much my friend. Makes sense now.
It makes me real happy whenever you flip into french for a word here or two. Sincerely, a French Canadian in Alberta.
You should test the Wiha version of that tool, a 500 euro electric screwdriver :)
I bought the Dremel version of this last year from the Homeless Despot on liquidation for 30 Canadian Pesos to use in my day to day activities as a sparky. It has come in really handy during big jobs where i'm spending a week installing numerous plugs and switches all day long. Its held up well after a year of banging around my tool bag most days, to being used all day long on others.
Thank you needed this, have an amazing day. engage safety squints 🤣
Cheers Mike! You have a good 'un too.
I am from India and I can confirm that the product is from India. The language is Hindi, all the cities mentioned are in India. Great vid as always !!
Sorry AvE, I was kinda hoping to keep my mom alive through this but I guess that makes me a slave of the nanny state.
I see the Hitachi is still on the healing bench... HOLD STRONG BUDDY!
Ave, In reference to not preaching about wearing a mask, that cloth cuts both ways.
I’ve watched every single one of your videos. But today more than ever, do I surely appreciate your technical, yet funny videos. I’ve learned a thing or three from every one but it sure takes my mind off the craziness. Plus I get to drink a beer or two whilst watching
11:40 Moral authority? I don’t think that’s why folks wear the masks - do you believe they do nothing and that the public should not be wearing them?
Thank you for the nod to Towel Day at the end, I thought I was the only one celebrating. 🇬🇹
hey man, what happened to that sweet japanhese toaster?
I want that overpriced thing . It was very very nice .
It's still on the healing bench.
Selected your vijeo with headphones on and the gain unwisely turned up after listening to another and then having had a bit of an email session. To say that your hearty greating caught me by surprise is an understatement; it just about made my eyeballs clack together in surprise. Almost thought that I had something in the vice . . .
1 to 6 is because "it goes to eleven" but in a subtle German way...
Have you seen the Dremel-branded version of this? Exact same-same tool, but sporting the Dremel nom-day-ploom.
The only time I've ever been so excited by a screwdriver, is when I got my Weras.
Edit: It's probably 1-6 so you have turn it up to almost 11, but not eleven, because it would be 12?
Maths.
There's a difference between the country and the city. Density of humans (otherwise known as covid incubators) is higher in the city. Anything that keeps your inside juices out of the air I'm breathing is a good thing, especially on a bus.
Try the dewalt one with the gyro. I love that tool :)
I've got one of those, the DCF680N2. Swappable batteries, torque clutch, flashlight. Bought for the exact reason AvE did - old person tendonitis catching up to me. It's the Cadillac of power screwdrivers, IMO.
I bought 3 Black and Decker thingies like that over the years. One had had a recharging stand that disappeared rendering the driver useless. One had a bog standard plug in recharging port for a power supply and t'other took 4 AA's. It was also fire engine red in colour making it easiest to find, so most often used.
Crap tons of torque for a smallish sized thing.
You gotta love when it lists a reputable shop with a @yahoo email address
Punch line; “oh well, at least he’ll have great forsight!!”
🤣
5:57 EDIT OF THE MONTH
Back in the day the ancestor of these were very handy. Big thumbs up
I’ll give him a 5. Out of 6
Lol
Been subbed awhile but I've never really watched a video... Now that I have I'm glad I did! Love your humor, love your candor, keep up the great work!
I'm confused, does he not realize the masks are to protect other people from you? Not the other way around?
I dont think most people realize this. Why else would people drive alone in their own car with them on? Or walk alone through the suburbs wearing it with no one coming within 50 feet of them.
I love this little screw driver, have had one for over a year. FYI the 1-6 is a torque setting.
AvE 2031 - "BOLTR - Ikea flat pack mobility skuutar"
13:49 The delay is most likely the bit gets firmly in contact with the screw head so it doesn't ruin it by camming out. I bought an el cheapo (walmart store brand - hypertough) for $14 a couple of years back now. You can't beat it for the price & it's got none of that push-to-go nonsense. I use your magnet trick a lot with it to hold screws.
Hey so since my President won't wear a mask and you're dogging on your PM for wearing one, you uh, wanna trade?
5:49 when the button flew off and the video cut, I was in tears laughing.
That honestly made my day, and i was having an awful day, thanks.
2:46 That's கோயம்புத்தூர் you bumblefack nice review love your vids.