I have 4 powerful Jeep radiatior fans and two 150 watt solar modules for running themand 4X535= 2kw ongrid plant fitting each fan under middle of every solar panel using multiple fogging nozzles on fan air outlet and on sides of solar panel for corrosion paint can be used
Using copper pipes to cool solar panel isn't a bad idea. Beacause running water flow for enough time will eventually cool down the hotspots as well. also spraying water, when the panel is about to get hot, is a good idea to not damage the solar panel glasses.
Fan from back side can be used.Running water from back side through pipes and hot water comming out can be used for direct use in day time
Ye sahi hai apka.. idea de hum or patent banavo aap..
Can heat reflective coat be applied to frame on panels?
Use a nitogen based air chamber cooling system. It cheap to. Produce and it cooler than normal air.
🤗
simple do the water pipes disen chang 😂😂😂😂
Agricturein Tapak tapak System
I think we should focus on solar panel glass improvement or replace by other materials. So that we can spread cool water on panels in summer.
Kuchh nahi back side PE thermo generator pannel laga do bus heat se electricity mil jayegi
Solar panel ka angel aise lagana ki jab temperature high ho tab sun ki light Kam pare
Car engine thanda rakhne k liye jis tarah coolant use kiya jata h wo use nahi ho sakta kya
I have 4 powerful Jeep radiatior fans and two 150 watt solar modules for running themand 4X535= 2kw ongrid plant fitting each fan under middle of every solar panel using multiple fogging nozzles on fan air outlet and on sides of solar panel for corrosion paint can be used
Increase efficiency by absorbing more spectrum reducing heat
Using copper pipes to cool solar panel isn't a bad idea. Beacause running water flow for enough time will eventually cool down the hotspots as well.
also spraying water, when the panel is about to get hot, is a good idea to not damage the solar panel glasses.