Hi doctor, don't be tired, thank you for your excellent films, doctor, why didn't you use ammonia in palladium deposition, there was a problem here, then in your film, you mixed sodium formate with sodium, or did you add sodium first, then the formate and pH that you made with sodium, you said it would become cloudy, how much was it? thank you
Just wanted to do it differently, you can either add sodium hydroxide at the first place or sodium formate . The pH of solution should be around 2-3 if it persists percipitation you can add more sodium hydroxide to push Pd out
@@PickyPlans OK thanks, I'm depopulating boards from the 80 and 90 will have a few kilos of these.. I don't have the equipment to process them, maybe you can process them for me split the profit.... Just thinking..
Hello picky i have a question for you about thiosulfate gold leaching, i was reading a journal and found the measurment: 0.12m thiosulfate (13.44gram of thiosulfate in 1liter water), 0.2m of amonia (3.4ml in 1liter water), and 20mikromolar of copper (ii). Picky can you make a recipe for me what's exatcly the measurment of each ingredient because if you dilute all of the ingredient above you would get a lot of solution (3 liters) also i don't know the mikro molar and what type of copper (ii) used.
It's an old school method which uses copper sulfate as an oxidizer when it binds with ammonia and forms a diamine complex but it's not very effective with e waste also is not practical even for ores
@@PickyPlansHello picky what's the recipe for thiosulfate gold leaching agent is the 0.2 mol of ammonium thiosulfate and 20mg of copper sulfate would work? But how to synthesize ammonium thiosulfate, using ammonium chloride and sodium thiosulfate please give me also the synthesize method, thanks.
@edibandulan5266 0.2 molar sodium thiosulfate solution is ok no need to make ammonium Thiosulfate just dissolve sodium thiosulfate in 5% ammonia solution and add 5 grams per liter copper sulfate, tempreture 50-60 C keep solution agitated
Perfect Congratulations🤝 I have many questions, if answer any you help me. In this procedure, what can be used to precipitate gold instead of sodium nitrite? I can get sodium nitrite of sodium nitrate? How? Grateful .
Thanks buddy! Using any source of SO2 gas would not precipitate pure gold since it can reduce some of palladium. You can use Ferrous sulfate then you can drop palladium at ph 2 using sodium formate. But your best bet is to use sodium nitrite to make it you can simply decompose Sodium nitrate at 600° Celsius or you can reduce it to nitrite using SO2 gas in presence of CuO suspended in the solution as a catalyst.
Hello, respected professor, I have a problem to precipitate the gold obtained from aqua regia, a gold sulphide rock. Many disturbing metals such as nickel, sulfur, chromium and iron with gold are dissolved in aqua regia, which does not precipitate gold with SO2 gas. Can you help me? Disable these disturbing ions??
Hello. iron sulfate does not work.i look for other ways.Are you the manufacturer of eco-goldex powder that selectively dissolves gold? If so, please guide me
золото было из каких-то MMLC, не знаю каких, это редкость, но возможно. конденсаторы были от истребителя F-14 Tomcat. спасибо за совет, кажется, это отличный способ подготовить тестовые бумаги к использованию
I already have videos about it. and next video will cover it as well. ua-cam.com/video/9WZj18SelrY/v-deo.htmlsi=1ebB6n08LWckvESo ua-cam.com/video/lUd-cKRG1dQ/v-deo.htmlsi=OMG9ZdRpJpdbCgrN
Hey just a question. I have alot of palladium/silver alloy things. Im not sure if there potentiometer or trimpots or something along those lines. They are extremely good for recovery. Gold legs also. I can send a pic to you. I was just hoping maybe you could help me on these and do a 50 50 split?
I have a feeling that there is a subtle but persistent odor. the smell of bullshit. no one has ever gotten gold out of monolithic capacitors. and with platinum, a big question. platinum was once very long ago in some soviet capacitors.
@@PickyPlans Well, how does this justify lying about gold in monoliths? the technology of their manufacture does not provide for the use of gold, no reference book indicates the content of gold in monoliths, no refiner has ever found gold in monoliths. you are just a scammer, you need to gain likes and views and you brazenly lie.
It was for platinum... All talk and no substance...! Explore the forums and groups online, and seek advice from the experts. They’ll provide you a better guidance than your references.
@geistgefallene1116 you look and sound like a fool. With the many thousands of manufacturers of mlccs over the past 80 years, you sure are persistent that you know everything about mlccs. I get Au from mlccs all the time and the mlccs are western. The video are European, if you refine you'd know the difference in PM content and yields. But clearly you don't As odd as it may seem to you, in the forums and groups I am in, this is common. IYKYK if you don't know, learn! You clearly have no idea and look stupid asf
@@PickyPlans My major at university was "technology of production of electronic components". and i have read as many forums as you have not eaten shawarma in your life, and i repeat - you are a fake maker and scammer.
Очень хороший результат! Не ожидал, что в них будет ещё и золото. 👍👍👍
Bahut acchi Jankari thank u Sar ji🎉❤
One of the best on youtube
Thanks!
درود عرض ادب خدمت جناب دکتر محمد عزیز دکتر جانم پودر حل کننده طلا را قیمت چند میده
دکتر جان شما ایرانی هستید چرا انگلیسی حرف می‌زنید
@@SalamJafari-s4x فارسی زبان ها همه اوستا هستن ، نیازی ندارن به این مطلب
Nice job! Good info.
I recall seeing some older boards with a good amount of these on some.
Sometimes, some potent components are underestimated
Very nice job
Parabéns pelo vídeo , você faz e mostra realmente como se faz , quebrando tabu dos metais do grupo da platina 👏🏽👏🏽👏🏽👏🏽
good job bro 🌹🌹🌹🌹👍🔥
Thanks bro❤️
Bu cıkanlar ne bro
@@erhan1303 hangisi
Excellent video bro
Thank you so much
Great job, what is the kind of the catching dish you use for heating beakers?
Thanks mate, it's Pyrex used for Cooking in Ovens
It’s 2am before work, but it’s picky so just this video 😂
Thanks for watching!
สวัดดีค่ะท่าน.อ.จ ยากให้เขียนเป็นภาษาไทยมากค่ะด้วยคาวมรู้ชัดเจนมากค่ะขอบคุณค่ะ
Hi doctor, don't be tired, thank you for your excellent films, doctor, why didn't you use ammonia in palladium deposition, there was a problem here, then in your film, you mixed sodium formate with sodium, or did you add sodium first, then the formate and pH that you made with sodium, you said it would become cloudy, how much was it? thank you
Just wanted to do it differently, you can either add sodium hydroxide at the first place or sodium formate . The pH of solution should be around 2-3 if it persists percipitation you can add more sodium hydroxide to push Pd out
Маловато будет!( Я думал что будет больше 🤔👍
Did you weight them before incineration, if so how much were they?
166 grams
@@PickyPlans OK thanks, I'm depopulating boards from the 80 and 90 will have a few kilos of these.. I don't have the equipment to process them, maybe you can process them for me split the profit.... Just thinking..
Well done.
ی سوال دارم، فک کنم با خلاقیتی که داری هود خودتون ساختین، امکانش هست ی ویدئو هم از ساخت هود بزارید؟ با حداقل خلاصه ای از ساخت ش؟
Holy crap you used more chemicals to recover that, was less than I was thinking I guess.
Is this hard work worth this much of metal waste of energy and time.
But good informative vedio
Poderia fazer um vídeo mostrando em que tipo de placa tem esses mlcc,por favor?
Muito obrigado. Mostrei esses MLCCS no outro vídeo. aqui está o link
ua-cam.com/video/vq7pope5c0U/v-deo.htmlsi=jCeXwmKKAwyqUfvF
Hello picky i have a question for you about thiosulfate gold leaching, i was reading a journal and found the measurment: 0.12m thiosulfate (13.44gram of thiosulfate in 1liter water), 0.2m of amonia (3.4ml in 1liter water), and 20mikromolar of copper (ii). Picky can you make a recipe for me what's exatcly the measurment of each ingredient because if you dilute all of the ingredient above you would get a lot of solution (3 liters) also i don't know the mikro molar and what type of copper (ii) used.
It's an old school method which uses copper sulfate as an oxidizer when it binds with ammonia and forms a diamine complex but it's not very effective with e waste also is not practical even for ores
@@PickyPlans what's the best recipe then? Can you help me.
@@PickyPlansHello picky what's the recipe for thiosulfate gold leaching agent is the 0.2 mol of ammonium thiosulfate and 20mg of copper sulfate would work? But how to synthesize ammonium thiosulfate, using ammonium chloride and sodium thiosulfate please give me also the synthesize method, thanks.
@edibandulan5266 0.2 molar sodium thiosulfate solution is ok no need to make ammonium Thiosulfate just dissolve sodium thiosulfate in 5% ammonia solution and add 5 grams per liter copper sulfate, tempreture 50-60 C keep solution agitated
Perfect Congratulations🤝
I have many questions, if answer any you help me.
In this procedure, what can be used to precipitate gold instead of sodium nitrite? I can get sodium nitrite of sodium nitrate? How? Grateful .
Thanks buddy!
Using any source of SO2 gas would not precipitate pure gold since it can reduce some of palladium. You can use Ferrous sulfate then you can drop palladium at ph 2 using sodium formate. But your best bet is to use sodium nitrite to make it you can simply decompose Sodium nitrate at 600° Celsius or you can reduce it to nitrite using SO2 gas in presence of CuO suspended in the solution as a catalyst.
@@PickyPlans Thanks bro
Hello, respected professor, I have a problem to precipitate the gold obtained from aqua regia, a gold sulphide rock. Many disturbing metals such as nickel, sulfur, chromium and iron with gold are dissolved in aqua regia, which does not precipitate gold with SO2 gas. Can you help me? Disable these disturbing ions??
Ferrous sulfate works great for dirty solutions
Hello. iron sulfate does not work.i look for other ways.Are you the manufacturer of eco-goldex powder that selectively dissolves gold? If so, please guide me
I hope I found this video sooner cuz I threw away a bag of RF capacitors
سلام درود و عرض ادب خدمت جناب دکتر محمد عزیز خدا قوت برادر
دکتر جان اون پودر حل کننده طلا قیمت چند میدید
درود اینستاگرام به آیدی
@bazyaft_tala_babol
پیام بدید
❤
Шикарный выход! Откуда там золото?)
Фильтр бумагу пропитай раствором хлорида олова в спирте и когда высохнет получится отличная тест бумага 👍
золото было из каких-то MMLC, не знаю каких, это редкость, но возможно. конденсаторы были от истребителя F-14 Tomcat. спасибо за совет, кажется, это отличный способ подготовить тестовые бумаги к использованию
@@PickyPlans метод рабочий, но бумага становится хрупкая приходится брать пинцетом.
Mashallah
You said adding sudiom natrite to drop gold, are you sure?
Yes sodium NITRITE (NaNO2)....NOT NITRATE (NaNO3)
@@PickyPlans thank you for good discretion
Please Make a video, gold recovery with sodium thiosulfate.
I already have videos about it. and next video will cover it as well.
ua-cam.com/video/9WZj18SelrY/v-deo.htmlsi=1ebB6n08LWckvESo
ua-cam.com/video/lUd-cKRG1dQ/v-deo.htmlsi=OMG9ZdRpJpdbCgrN
@@PickyPlans thank you .
Muy bueno el vídeo pero no explica nada del proceso
🙋
Hey just a question. I have alot of palladium/silver alloy things. Im not sure if there potentiometer or trimpots or something along those lines. They are extremely good for recovery. Gold legs also. I can send a pic to you. I was just hoping maybe you could help me on these and do a 50 50 split?
Hello my friend, DM me on Facebook
facebook.com/picky.plans?mibextid=ZbWKwL
Ciao carissimo se puoi fallo anche in lingua italiana
è stato pubblicato, ma funziona solo per i sottotitoli soft
@@PickyPlans grazie 👏
يوجد عندي بلاديوم للبيع ارجو مراسلتي
كم لديك؟
@PickyPlans
واحد ونصف كغ غير مصفى اي غير محروق
@الزراعةالمنزلية-غ4و أدعو لبيعه لك إذا لم يكن لديك أي مشترين له
@@PickyPlans
كم الثمن مقابل الكميه يعني شكد يسواه ثمنه
@الزراعةالمنزلية-غ4و يبلغ سعره حوالي 28000 دولار أمريكي للكيلوغرام الواحد
Is there a Thai language translator?
There is, but as soft sub for the voice over
I have a feeling that there is a subtle but persistent odor. the smell of bullshit. no one has ever gotten gold out of monolithic capacitors. and with platinum, a big question. platinum was once very long ago in some soviet capacitors.
What about a Tomcat F-14 boards?
ua-cam.com/video/vq7pope5c0U/v-deo.htmlsi=_d4TXr7smhIeNOt3
@@PickyPlans Well, how does this justify lying about gold in monoliths? the technology of their manufacture does not provide for the use of gold, no reference book indicates the content of gold in monoliths, no refiner has ever found gold in monoliths. you are just a scammer, you need to gain likes and views and you brazenly lie.
It was for platinum...
All talk and no substance...!
Explore the forums and groups online, and seek advice from the experts. They’ll provide you a better guidance than your references.
@geistgefallene1116 you look and sound like a fool. With the many thousands of manufacturers of mlccs over the past 80 years, you sure are persistent that you know everything about mlccs.
I get Au from mlccs all the time and the mlccs are western. The video are European, if you refine you'd know the difference in PM content and yields. But clearly you don't
As odd as it may seem to you, in the forums and groups I am in, this is common. IYKYK if you don't know, learn!
You clearly have no idea and look stupid asf
@@PickyPlans My major at university was "technology of production of electronic components". and i have read as many forums as you have not eaten shawarma in your life, and i repeat - you are a fake maker and scammer.