Dude I appreciate the video, you rock! Means so much that you enjoyed it! Like he said guys and gals, if you see something that needs tweaking don’t be afraid to make suggestions! Also hmu with any questions! Maybe I should send mine and have an Eel vs Eel face off 👀
Man those little nut holders are ingenious! If anyone builds Mazz type chassis you already know you need them! Just yesterday I had a truck balancing upside-down with a nut held in my tweezers by death grip so it wouldnt rotate while trying to keep a 1.4 bolt on my tool with other hand.....Im ordering one now! Thanks for sharing that!
We just spoke about this chassis. I run gladiator wheelbase and decided to try a Gatekeeper chassis from Vengrc. If he makes a XL version, I may try one. Great video as always, thanks
I’m a big fan of the long wheelbase 💛 I actually run mine JT length (with longer shocks) but the rear body mount may hit the rear upper link mount depending on what axle you run and your castor. A little bit longer eel would be cool though I’ll definitely keep that in mind!
I have a suggestion for the frame and i hate making suggestion with something iv never even layed my hands on but in my eyes as a potential buyer i think the rear hump section with the shock mounting holes needs to be back about an inch and one more set of holes higher up so longer shocks can be run straight up and down and more holes can be used in prime location also the front stretched a couple more holes following your arch would be nice to...hope i dont offend anyone as it looks like a very nice chassis and im loving that its metal not plastic and that the links can be moved around
@@24Yepp he’s a good guy. I ordered the long body mounts. He sent me a message saying that he’d updated them and that he was going to send me the new ones and some extra stuff. He’s a stand up guy
Awesome Looking Chassis, another great video bro, I subbed ya 2 days ago and am in to 13 full video watched and have to say i totaly enjoy your informative videos, the rock locations you use to record the run is just awesome and has so many lines for you to use. Keep the content comming, I will share out and watch each one from start to finish, I am more of the 1/10 scale hobbiest but do enjoy the mini's as winter is long here in western Canada and the 24's fill the months of snow for me, as i can play indoors with these little rigs. This is now my go to channel for the 24th scale side.👌🤜🤛
Loving your stuff bro, after this video I went on Etsy and ordered the frame and a set of tools. What links, shocks and axles did he have? Thank you for the 411 on new parts from new people making this hobby so much fun. You should do a compilation of your favorite cars and parts and see if you can build the ultimate 24 crawler.
Thank you!!! The shocks in the video are rclion amazon cheapos Links are double bend mazz design cbolt length Axles are mofo rc x15 with brass knuckles
Looks sick. One note, I learned on Cape Crawlers videos of the double bend links from Mazz himself, your front upper links are upside down. The bend goes down to clear pancake motors. Figured I would share.
Great chassis likeing the tests on chassis only keeping other veriables the same realy shows what they can do . Proper jealous of your rocks looks like a fun playground . PEACE !
Mint chassis review.👍🏻 In regard to the carrier bearing propshaft, I wonder how long till someone makes a 90 gearbox for the rear axle pinion to face vertical, like a mud/military truck axle?. It'd certainly lift the prop clear.
They are from a company called "3flow9rc" Its a roller link. They are bearings. The idea is they help the truck roll up and over instead of getting stuck on the steering link
The cab only with those chassis bends is just pretty. The red truck body looked like the body might cause limit some of the clearance. It did also look great though
Awesome chassis design. I’m gonna go order one for myself. But running without the body will always perform better. Curious as to how it performs with a body on it. That cab only looked badass!
@@Lets_RC I agree. From now on, chassis videos will have body on and body off footage. I originally did body off to help see the chassis better but yeah I gotcha. 🫡
Duuuuuude the flex is wicked yeah this is something that i need to get great video as always imagine with 4ws for thise who like it cuz i know yep dont lol
@24Yepp can't figure out how to mount upper link into rails and into slider,i know it goes into front hole but nothing to bite into hope that helps i sent my email if u want to send pics there.. thnx again for your time
@@RCRICHIE for my front upper links it slides first through the chassis and screws into nothing. I have a little nut on the screw. Then i have the slider on top of all of that
@@24Yepp Your videos have been helping me get through some tough days lately. I use to compete with 1/10 scale for a few yrs and have a couple scx24 that are almost stock but your videos have motivated me to get back into crawling. I also work in the woods so the 1/24 will probably just stay in my work truck.
@@24Yepp definitely helps keep my mind off my divorce but it also caused me to order a Cooprc chassis and spend a bunch on Meus and Injora parts so I might have to send it your way when it’s done. I’m making a copy of a Toyota I had 20yrs ago.
Holy shinto! The electronics and trans noise together is like a couple of meth-head squirrels yelling at each other in my ear buds! Great as always otherwise. Good job Coop! Best wishes!
Dude I appreciate the video, you rock! Means so much that you enjoyed it! Like he said guys and gals, if you see something that needs tweaking don’t be afraid to make suggestions! Also hmu with any questions! Maybe I should send mine and have an Eel vs Eel face off 👀
The great eel off 🧐
Really should have called it Nessie, looks like the loch ness monster.
@@24Yepp Performance was too good to pass up. Got your sale :)
@@alienateed4101Woohoo! Met my quota 👌🏻
Man those little nut holders are ingenious! If anyone builds Mazz type chassis you already know you need them! Just yesterday I had a truck balancing upside-down with a nut held in my tweezers by death grip so it wouldnt rotate while trying to keep a 1.4 bolt on my tool with other hand.....Im ordering one now! Thanks for sharing that!
@@johnnyhotshoe1292 🤣 Been there done that
I use forceps. Use to hold my joint whit it when it got small a.k.a. roch
We just spoke about this chassis. I run gladiator wheelbase and decided to try a Gatekeeper chassis from Vengrc. If he makes a XL version, I may try one. Great video as always, thanks
I’m a big fan of the long wheelbase 💛 I actually run mine JT length (with longer shocks) but the rear body mount may hit the rear upper link mount depending on what axle you run and your castor. A little bit longer eel would be cool though I’ll definitely keep that in mind!
I second this!!!longer wheelbase and big tires for the win
I absolutely love this chassis design.
SAME!
@@24YeppYou should put a cab only body on it so the rear part of the rails are exposed. Just my thoughts though man.
I'm very happy you chose Drunken Frog name for that line it's ingeniuos. The new lines are amazing they "rock"!
@@jacopor.grandis8848 🥴
I picked one up for a future build. Very nice chassis Coop.
Sweet vid bro!! Sweet build!🏴
Sweet setup, C / Bolt wheelbase works great, love those two piece sliders, tires look a little stiff. Nice rig
I basically have a the same setup currently on a Warthog chassis. Looks like i'm swapping that out. Thanks
Breaking the lamp and the window falling out are top tier 😂
Still haven't glued it back in..
Thought his ole lady was gonna non alive him lol but her laughter tops it off
It will buffernutter out
@@johnnyhotshoe1292 🤣
I really enjoyed watching this episode great chassis 🤘✌️
Thank you!
I have a suggestion for the frame and i hate making suggestion with something iv never even layed my hands on but in my eyes as a potential buyer i think the rear hump section with the shock mounting holes needs to be back about an inch and one more set of holes higher up so longer shocks can be run straight up and down and more holes can be used in prime location also the front stretched a couple more holes following your arch would be nice to...hope i dont offend anyone as it looks like a very nice chassis and im loving that its metal not plastic and that the links can be moved around
It preformed great 👍 I’m going to have to get one soon. I just ordered the nut kit, roof rack, and the long body mount from him
Nice! He has some cool stuff for sure. Theres a few etsy shops I check weekly and this will be one of them now
@@24Yepp he’s a good guy. I ordered the long body mounts. He sent me a message saying that he’d updated them and that he was going to send me the new ones and some extra stuff. He’s a stand up guy
Thank you again bro 💛
Great review, gonna try a carrier bearing setup. Got the purple one today.
Awesome Looking Chassis, another great video bro, I subbed ya 2 days ago and am in to 13 full video watched and have to say i totaly enjoy your informative videos, the rock locations you use to record the run is just awesome and has so many lines for you to use. Keep the content comming, I will share out and watch each one from start to finish, I am more of the 1/10 scale hobbiest but do enjoy the mini's as winter is long here in western Canada and the 24's fill the months of snow for me, as i can play indoors with these little rigs. This is now my go to channel for the 24th scale side.👌🤜🤛
Thanks man I really appreciate it! Subb'd back!
@@24Yepp Thanks man much appreciated!!
Build that Cab only. That looked Good.
Thank you! I'm gonna check his products out, always looking for great chassis'!
Nutt holders! 😂😂😂😂
I'm gonna get some of those.
😬😬😬 Luckily the holders were the perfect size
Loving your stuff bro, after this video I went on Etsy and ordered the frame and a set of tools. What links, shocks and axles did he have? Thank you for the 411 on new parts from new people making this hobby so much fun. You should do a compilation of your favorite cars and parts and see if you can build the ultimate 24 crawler.
Thank you!!!
The shocks in the video are rclion amazon cheapos
Links are double bend mazz design cbolt length
Axles are mofo rc x15 with brass knuckles
I appreciate you so much dude! Order shipped today 😎
Looks sick. One note, I learned on Cape Crawlers videos of the double bend links from Mazz himself, your front upper links are upside down. The bend goes down to clear pancake motors. Figured I would share.
Ahhhh good to know this, I was wondering why that bend was there hahaha thank you!
@@24Yepp you bet! I was confused too until I saw that video and Mazz's comment.
@@trentrichards7072 I have like 10 I need to swap now.... they work fine maybe I'll just ignore it 😁
@@24Yepp haha, without the cheat code 15 degree angle, you're probably fine. It's meant for clearance with that crazy skid.
The sideways line with the sidewall flat on the ground was NUTS 🔥👌🏼 will be picking one up soon! Nice video brother!
Great chassis likeing the tests on chassis only keeping other veriables the same realy shows what they can do . Proper jealous of your rocks looks like a fun playground .
PEACE !
Petition to name the new rock spot "quarry run"
I think it would fit because the rock is all squared off like an actual quarry
Mint chassis review.👍🏻
In regard to the carrier bearing propshaft, I wonder how long till someone makes a 90 gearbox for the rear axle pinion to face vertical, like a mud/military truck axle?.
It'd certainly lift the prop clear.
LOLOL dude the new intro with "24 Yep is the beefiest of sweethearts" had me fuckin rollin. Had to watch it like 5 times lolol
😆
What are the front steering links called?
They are from a company called "3flow9rc" Its a roller link. They are bearings. The idea is they help the truck roll up and over instead of getting stuck on the steering link
@@24Yepp Thanx dude, you rock!
The cab only with those chassis bends is just pretty. The red truck body looked like the body might cause limit some of the clearance. It did also look great though
Yeah after looking at it for a bit, we are going cab only 👍🏻
You pulled some cool lines in this video! Do you have any battery recommendations?
@@ShaunKjar I'm an idiot witu batteries. I just use the stock one in everything to keep it simple
I'm very happy you chose Drunken Frog name, it's ingeniuos. The new lines are amazing: they really rock!
So i could get one of these kits and My Stock stuff would fit over to it ? I like this chassis.
It would yeah. I'd recommend some mazz high clearance links to make the most of the skid angle.
@@24Yepp Perfect .. You Rock THANK YOU BRO
Awesome chassis design. I’m gonna go order one for myself. But running without the body will always perform better. Curious as to how it performs with a body on it. That cab only looked badass!
@@Lets_RC I agree. From now on, chassis videos will have body on and body off footage. I originally did body off to help see the chassis better but yeah I gotcha. 🫡
@@24Yepp man I’m about to place an order. That thing looked like a line killer. Thanks bud! 🤙
@@Lets_RC 🫡🫡🫡 I'm loving mine!
I love the intro
Intro freaked me out at 1st lol but its cool af
What’s your opinion on motor noise and gear noise? It does my head in one of the things I liked about the accent 18 so quiet
It never bothers me until I watch the videos back. The camera makes it so much worse
Looking Good! ✌🏼😎
Where can I get the printed Ford Econoline pickup body that I've seen pictures of?
I'm not sure which one you mean, is it one that I have?
yep!😎
Hey man what transmission are you running in this thing?
@@SeanLewisMedia i forget which one this had, usually i just use the stock one
Duuuuuude the flex is wicked yeah this is something that i need to get great video as always imagine with 4ws for thise who like it cuz i know yep dont lol
Yo trey need your help with eel chassis lite, where and how did u mount upper links and hardware used?
@@RCRICHIE hey are you on instagram? I can send pics easier
Sorry I'm not
@ are you having a specific issue? Maybe that would help my answer
@24Yepp can't figure out how to mount upper link into rails and into slider,i know it goes into front hole but nothing to bite into hope that helps i sent my email if u want to send pics there.. thnx again for your time
@@RCRICHIE for my front upper links it slides first through the chassis and screws into nothing. I have a little nut on the screw. Then i have the slider on top of all of that
what camera do you use ? just trying to get better at filming. its hard since i hand a messed up right hand
@@Rcnewbe77 sony zv-1f from amazon for my youtube videos. I film on my phone for instagram reels
What motor was you using in this video ?
furitek venom
A drunkn frog driving in a 4x4 rc basket would be a rad T-shirt
@@Havingoneofthosedays- on it
How do I send you a custom build to roast
Wutcha got?
A custom Mini Z Rubicon/SCX24. Just uploaded some pics of it next to my bronco build on my YT. Doing a build break down Wednesday
Late night depression shopping just ordered a chassis and basically everything else I need to build an entire crawler.
@@DC980G2 Excellent. Well, not the depression part. Crawling in the woods is actually a nice little depression helper for a lot of people
@@24Yepp Your videos have been helping me get through some tough days lately. I use to compete with 1/10 scale for a few yrs and have a couple scx24 that are almost stock but your videos have motivated me to get back into crawling. I also work in the woods so the 1/24 will probably just stay in my work truck.
@ I've actually had a lot of similar messages about my videos helping get through rough times... Crazy that I'm able to help but I'm glad I can!!
@@24Yepp definitely helps keep my mind off my divorce but it also caused me to order a Cooprc chassis and spend a bunch on Meus and Injora parts so I might have to send it your way when it’s done. I’m making a copy of a Toyota I had 20yrs ago.
Happy Weekend Boys!!!!
Very cool
I use forseps,i. Use it to hold my roach with it. now nuts an pins.
12:12 HARRY SPOTTER?
🤣 Distant relative of harry potter
Coops a badass! He doesn’t just play Offroad, he lives it 👍
Yeehaw!
@@troypostie1252 YEP
wasap gangstasss
Ayyyooo
😃
😎
Holy shinto! The electronics and trans noise together is like a couple of meth-head squirrels yelling at each other in my ear buds! Great as always otherwise. Good job Coop! Best wishes!
I havent seen no 4ws on the channel yet 😢
Filming one at the moment! Its really hard to film and 4ws unfortunately
@@24Yepp dude yes hell yah
Needs a body on it for any comparison. A finished rig also needs lights in my eyes so who cares really😂😂😂
Noted 🫡
Wow that looks like the mofo chassis
Nude chassis runs are a prideful sin against the Superlord Christkrakken and must be avenged (Modulations 4:10).
I know I know. My thought was, you could see the chassis better and how it uhhhh works 🧐