Your videos have really great content but you should talk in them, it make them a lot better with you explaining things. Love the new jbc hot air station handle, it’s a lot bigger than your other one, be a lot better for larger chips.
I'm Using the 700W Unit (JTS 230V-2A Hot Air Control Unit) and if i get the one you are saying, the TE-TB hose, will air pressure be lower to, as i want really low air pressure when i put on low. Thanks.
Based on my knowlege, the smaller TE-TB hose will supply lower SLI. The unit controller are both the same regardless if you buy it with the JTA handle or the TE-TB. And I can attest to that it is indeed true! Since I have both hoses, the TE-TB does have a lower air pressure than it's brother.
But I am not sure if your unit will fit the TE-TB hoses. I know JBC has just upgraded these units not too long ago, so you might want to check with JBC first to see if your unit is compatible.
@@forthosewhodare7325 is what JBC is, they will send a engineer with new unit as this one don't hold time and date, so they say is faulty, and engineer will bring a brand new one with him and i can test both, hose's they work both on same unit is 700W unit even JBC show 300W and 700W i think is done to what hose take,is what we pay for Quality and good service, they do go from zero to whatever are set in seconds, other Chinese take some time to go and to stabilise at the temperature are set, i was checking other Chinese i have was set at 280 degree and temp oscillate between 240-310 degree,i ll get both hoses and i will do small and big IC's, the TE-TB i hope will not heat parts around the Main IC we work on same as the JT-A does, high air pressure just Dry out to fast the flux,THX for the reply.
yes are best smaller give lower air pressure and higher give stronger air pressure i got both hoses JT and TE same as you got it get to temp very fast, everyone like the Chinese, because are cheaper but they give to much air pressure.
@Justice League i see you got both i got the powerful one: 1 JTS 230V-2A Hot Air Control Unit and 1 JT Heater Hose Sets i was thinking to change it with: 1 TESE-2A 230V Hot Air Control Unit 1 TE-TB Precision Heater hose set The JTS and JT it kind of blows parts away and it overheats the parts around, what do you think ?
@@forthosewhodare7325 i need low air or very low air, i was thinking to get other hose but Air Flow on mine is 5 to 50 SLPM if i plug the TE-TB will go lower ? other have 2 to 17 SLPM, you have any discord ? Thanks
I also forgot to say if i turn it off and not unplug the unit it will not keep the time and date, yours holds the time and date after you turn-it back on ? is plugged in all the time, is strange for that much money it memorise hours we use and not memorise the simple time and date, maybe mine is faulty.
Is your work desk tempered glass tops? Quite scary that if it happens to shatter, all that expensive equipment could be damaged as a result! 😅
Your videos have really great content but you should talk in them, it make them a lot better with you explaining things. Love the new jbc hot air station handle, it’s a lot bigger than your other one, be a lot better for larger chips.
hi ! could you give me think site where you bought Your JBC equiment ! many thanks
I got it from their own website
👏🏻😀
I'm Using the 700W Unit (JTS 230V-2A Hot Air Control Unit) and if i get the one you are saying, the TE-TB hose, will air pressure be lower to, as i want really low air pressure when i put on low. Thanks.
Based on my knowlege, the smaller TE-TB hose will supply lower SLI. The unit controller are both the same regardless if you buy it with the JTA handle or the TE-TB. And I can attest to that it is indeed true! Since I have both hoses, the TE-TB does have a lower air pressure than it's brother.
But I am not sure if your unit will fit the TE-TB hoses. I know JBC has just upgraded these units not too long ago, so you might want to check with JBC first to see if your unit is compatible.
@@forthosewhodare7325 is what JBC is, they will send a engineer with new unit as this one don't hold time and date, so they say is faulty, and engineer will bring a brand new one with him and i can test both, hose's they work both on same unit is 700W unit even JBC show 300W and 700W i think is done to what hose take,is what we pay for Quality and good service, they do go from zero to whatever are set in seconds, other Chinese take some time to go and to stabilise at the temperature are set, i was checking other Chinese i have was set at 280 degree and temp oscillate between 240-310 degree,i ll get both hoses and i will do small and big IC's, the TE-TB i hope will not heat parts around the Main IC we work on same as the JT-A does, high air pressure just Dry out to fast the flux,THX for the reply.
yes are best smaller give lower air pressure and higher give stronger air pressure i got both hoses JT and TE same as you got it get to temp very fast, everyone like the Chinese, because are cheaper but they give to much air pressure.
@Justice League i see you got both i got the powerful one:
1 JTS 230V-2A Hot Air Control Unit and
1 JT Heater Hose Sets
i was thinking to change it with:
1 TESE-2A 230V Hot Air Control Unit
1 TE-TB Precision Heater hose set
The JTS and JT it kind of blows parts away and it overheats the parts around, what do you think ?
I would just get the TE-TB hose for it. It is interchangeable and there will be times you will need the powerful one.
@@forthosewhodare7325 i need low air or very low air, i was thinking to get other hose but Air Flow on mine is 5 to 50 SLPM if i plug the TE-TB will go lower ? other have 2 to 17 SLPM, you have any discord ? Thanks
I also forgot to say if i turn it off and not unplug the unit it will not keep the time and date, yours holds the time and date after you turn-it back on ? is plugged in all the time, is strange for that much money it memorise hours we use and not memorise the simple time and date, maybe mine is faulty.
Have You ever tried Weller WTHA1 ? any opinon about its brushless handle ?