A SA video to end a great day. ❤ Wheels look great! I hope you’ll test the car with the old wheels first though. If you bring too many changes to the track in one go you’ll never know which of the changes caused the improvement. Great to see the S2000 back on its wheels. What a car! 🤩
We are going to do a video rundown of the wheels and show renderings for more aggressive sizes. Then gauge if folks want to do a group buy where we can have runs of them made
I LOVE a good 5-spoke wheel and yours look awesome! Make them where they can fit my ND lol. I also don't want to roll fenders, so a 8.5 width with a 45 offset is just about perfect for that with a 225/45/17 or 235/40/17 tire.
We are going to do a video rundown of the wheels and show renderings for more aggressive sizes. Then gauge if folks want to do a group buy where we can have runs of them made
We are going to do a video rundown of the wheels and show renderings for more aggressive sizes. Then gauge if folks want to do a group buy where we can have runs of them made
wheels look good! not a huge fan of the center cap design but that's all personal. Car sits way too low on the front, I agree. I'm waiting for my advans to arrive in 17x8.5 et51 all around, will be running a 245/40 squared so we'll see how they fit. I'm on ohlins and probably 5mm lower on the rear with similar gap up front. Did get my arches rolled slightly to allow for 245 to clear..
Yeah I had to raise the front and lower the rear. We are going to do a video rundown of the wheels and show renderings for more aggressive sizes. Then gauge if folks want to do a group buy where we can have runs of them made
If you are in NC anytime soon hit me up, you should try my car 01 AP1 vs yours. Mine is completely stock engine with j's header, test pipe, AEM cold air intake. Suspension is Sakebomb Ohlins long stroke setup and sway bars with Titan 7 TS-5's Bridgestone Potenza RE-71R 255 square setup, without rolling of fenders. Handles amazing, would like to see the difference between yours and mine. My car still has stock brakes with Carbotech pads and SS lines though.
We are going to do a video rundown of the wheels and show renderings for more aggressive sizes. Then gauge if folks want to do a group buy where we can have runs of them made
dont worry, next time you need someone to come and help with extracting A arm bushings. ill be there and help destroy the arms and your press lmao..... jokes aside i was excited for this
Have you guys got additional designs in mind for your own wheels, or what's the long term rationale? Design is clean, but I guess it's hard to do an "original" 5 spoke that's not weirdly outlandish in style. Reminds me a lot of the Advan GT, or the Rays wheels that were optional on a lot of OEMs back in the day like the MS-01S.
We are going to do a video rundown of the wheels and show renderings for more aggressive sizes. Then gauge if folks want to do a group buy where we can have runs of them made
We are going to do a video rundown of the wheels and show renderings for more aggressive sizes. Then gauge if folks want to do a group buy where we can have runs of them made
The front 7.5 +45 do not clear the new calipers so those are definitely for sale. I kinda want to try to pick up another pair of the rears for a street setup
Hey Quinn, you have mentioned that the miata feels more natural at the limit while the S2000 is more edgy. Do you think these modifications will make the S2000 more progressive and fun to drive as opposed to just fast?
... And I would love to see what kind of times you can get in that thing on the configuration LRP has been using for AutoX season standings.. That is a beautiful car, beautiful wheels, and I suspect could be one of the fastest on track (with the right tires)
Nice and deep..as always..... Them SA wheels are soooooooooooooooooooooooooooooo sexy... need some for Maz 3... and omg..... how much does all this cost......? Never knew Matchew..had sooooo much hair......🤪 N x
Decent spec wheels. Far too many people run stupid sizing for the sake of getting a show car fitment yet the claim to use the car properly😂 waste of expensive/lightweight wheels and the wide tyres that aren't making them faster
Nice build guys, the SA wheels look great
Thank you! 👍
Great job, can't wait to see your impressions.
Coming soon!
Wheels look good, can't wait to see what it can do at LRP.
Thank you Bruce!
Everything looks so good together! Glad you guys got it all done! Those wheels are nice (make them in bronze!)
We can!
Any plans do spoon subframe rigid collars while you're at it? Lol
Nah, the car is real good as is now
@@TheSlipAngle That's good to hear!
Dream s2000
A SA video to end a great day. ❤ Wheels look great! I hope you’ll test the car with the old wheels first though. If you bring too many changes to the track in one go you’ll never know which of the changes caused the improvement. Great to see the S2000 back on its wheels. What a car! 🤩
I’m getting a bone stock ap1 this week and I’ve been watching a lot of your guys’ vids
Loved the SA wheels, looking forward to the track video!
We are going to do a video rundown of the wheels and show renderings for more aggressive sizes. Then gauge if folks want to do a group buy where we can have runs of them made
@@TheSlipAngle that sounds like a great idea! Looking forward to it!
The intro teaser 🔥👌🏽
Yes! :)
i run those exact same tires on my s2000 they are great
They performed well!
I LOVE a good 5-spoke wheel and yours look awesome! Make them where they can fit my ND lol. I also don't want to roll fenders, so a 8.5 width with a 45 offset is just about perfect for that with a 225/45/17 or 235/40/17 tire.
Did you fellas have any issues with the spherical bushings fitment on the rear lower control arms ?
We did not
Great video, the SA wheels look great. Any plans to make them in larger sizes, and what will the pricing be?
We are going to do a video rundown of the wheels and show renderings for more aggressive sizes. Then gauge if folks want to do a group buy where we can have runs of them made
@@TheSlipAngle awesome, cool 👍
Extended open ended lug nuts, never again? I had a set and was always paranoid water sitting in there. Is that your reasoning? Also...Mattchew!
Yup, it will rust the studs
the wheels are hot.
We are going to do a video rundown of the wheels and show renderings for more aggressive sizes. Then gauge if folks want to do a group buy where we can have runs of them made
wheels look good! not a huge fan of the center cap design but that's all personal. Car sits way too low on the front, I agree. I'm waiting for my advans to arrive in 17x8.5 et51 all around, will be running a 245/40 squared so we'll see how they fit. I'm on ohlins and probably 5mm lower on the rear with similar gap up front. Did get my arches rolled slightly to allow for 245 to clear..
Yeah I had to raise the front and lower the rear. We are going to do a video rundown of the wheels and show renderings for more aggressive sizes. Then gauge if folks want to do a group buy where we can have runs of them made
If you are in NC anytime soon hit me up, you should try my car 01 AP1 vs yours. Mine is completely stock engine with j's header, test pipe, AEM cold air intake. Suspension is Sakebomb Ohlins long stroke setup and sway bars with Titan 7 TS-5's Bridgestone Potenza RE-71R 255 square setup, without rolling of fenders. Handles amazing, would like to see the difference between yours and mine. My car still has stock brakes with Carbotech pads and SS lines though.
SA Wheels in Miata fitment? Yes please!
We are going to do a video rundown of the wheels and show renderings for more aggressive sizes. Then gauge if folks want to do a group buy where we can have runs of them made
dont worry, next time you need someone to come and help with extracting A arm bushings. ill be there and help destroy the arms and your press lmao..... jokes aside i was excited for this
lol come on over
Hi, you said that you will not run open-ended lug nuts, what was your experience with them?
They suk. Studs start to rust. And faster than you'd think. Tats my experience with them
The studs rust. Closed lugs that's not an issue
@@TheSlipAngle got it, thanks!
Have you guys got additional designs in mind for your own wheels, or what's the long term rationale? Design is clean, but I guess it's hard to do an "original" 5 spoke that's not weirdly outlandish in style. Reminds me a lot of the Advan GT, or the Rays wheels that were optional on a lot of OEMs back in the day like the MS-01S.
We are going to do a video rundown of the wheels and show renderings for more aggressive sizes. Then gauge if folks want to do a group buy where we can have runs of them made
Is that a drift build?!? That’s nuts! Pretty cool tbh.
Not so much a drift build. Just want to be able to drive the car fast or hoon it around and pick the angle if the mood strikes :)
The SA wheels look sick! R you guys planning on selling sets?
We are going to do a video rundown of the wheels and show renderings for more aggressive sizes. Then gauge if folks want to do a group buy where we can have runs of them made
@@TheSlipAngle Cool I'm curious can't wait for specs like sizes, colors, weights, price, which ones fit BBK, ect
ive sent a message before about this, are you selling the advan rg2? Im interested.
The front 7.5 +45 do not clear the new calipers so those are definitely for sale. I kinda want to try to pick up another pair of the rears for a street setup
@@TheSlipAngle Ok, when you are ready lets discuss price.
NICE!!!
Thank you! Cheers!
Hey Quinn, you have mentioned that the miata feels more natural at the limit while the S2000 is more edgy. Do you think these modifications will make the S2000 more progressive and fun to drive as opposed to just fast?
Teaser answer: Yes
I suspect the AD09s will hold you back a bit... Put some Hoosier A7s on :P
... And I would love to see what kind of times you can get in that thing on the configuration LRP has been using for AutoX season standings.. That is a beautiful car, beautiful wheels, and I suspect could be one of the fastest on track (with the right tires)
I want flexibility in how I can drive it. Too much grip and the car is not playful
shitty comment here, as per your request.
fucken aye, dope build. can't wait to see your impressions on track. you guys are the realest. 💪🏾🤙🏾
:)
Why don't you like open ended wheel nuts? I was looking to get some 😢
The studs will rust
@@TheSlipAngle even if it's garaged? 👀 And avoids the rain anyway 👀
Lol, you accidentally bought one of the best street tyres.
Congratulations on the wheels, 5 spoke isn't for me, but I'm a die hard TE fan 🙂
Ballade = alibaba. Do your homework.
Nice and deep..as always.....
Them SA wheels are soooooooooooooooooooooooooooooo sexy...
need some for Maz 3...
and omg..... how much does all this cost......?
Never knew Matchew..had sooooo much hair......🤪
N x
Decent spec wheels. Far too many people run stupid sizing for the sake of getting a show car fitment yet the claim to use the car properly😂 waste of expensive/lightweight wheels and the wide tyres that aren't making them faster
Totally agree!
Who is Megan and why do you have her Toe Arms?
lol
peoples comments 😅