These days, if "e-mail address" is included in a comment, the comment is automatically classified as spam and the comment is automatically deleted. 요즘 댓글에 "메일주소"가 들어가면 댓글이 스펨으로 자동 분류되어 댓글이 자동으로 삭제됩니다. If it is automatically deleted, it will be impossible to send the requested drawing because I cannot see it. 자동삭제되면 제가 볼수가 없어서 요청하신 도면발송이 불가능해집니다. If you would like to receive drawings, please request drawings by e-mail "treean.wood@gmail.com". 도면 수신을 원하시는 분은 메일(treean.wood@gmail.com)로 도면 요청해 주시고 Then, just write down in the comments, "I sent you a drawing request by e-mail," and I will check it and send it to you as soon as I have time. 댓글에 "도면 요청을 메일로 보냈습니다." 이라고만 적어 주시면 확인후 시간나는데로 꼭 보내드리겠습니다. Thank you. 감사합니다.
اسبوعان وانا افتش باليوتيوب على تصميم الة سنفرة بوجود قياسات واطوال لغرض عملها ولكن بدون جدوى ؟! الان وجدت مأريد بهذا الفديو ؟ انا شاكر لك لدقة العمل وجماله وكأنه ناطق .. اضافة لدقة القياسات .. اشكرك لاسعادنا وندعي لك بالسعادة وزيادة المشتركين ؟ ولهذا اشتركت بالموقع ..🌺🙏🤝❤️
These days, if "e-mail address" is included in a comment, the comment is automatically classified as spam and the comment is automatically deleted. If it is automatically deleted, it will be impossible to send the requested drawing because I cannot see it. If you would like to receive drawings, please request drawings by e-mail "treean.wood@gmail.com". Then, just write down in the comments, "I sent you a drawing request by e-mail," and I will check it and send it to you as soon as I have time. Thank you.
This is the most clear DIY from sander video I've seen. I've been wanting to do one but I wasn't confident in the other designs I've seen. I think I will tackle this one! Thanks for the video, subscribing now!
Thanks for your interest.👍 I hope it will be helpful to those who watch this video even a little. I will try to reward you with better videos. Hope you enjoyed this video and if you like it, please share, subscribe, like ~~~ There are many other videos, so if you are interested, please watch. These days, comments are automatically classified as spam and deleted frequently. I'm never going to delete it, so please don't get me wrong. If a comment is deleted immediately within 1 minute, please send a request for a drawing to my e-mail (treean.wood@gmail.com) and I will send it to you as soon as I have time. thank you.
The most precise up and down mechanism because it uses rails, rather than using bolts, I'm making it and it's 70� finished... Thank you for the video, greetings from Indonesia 🇮🇩
Leave your just email address in the comments and i will send you the drawing file. (You must leave "just" your email address in the comments so that I can see it in the notification even if it is deleted.) Thanks for your interest.👍 I hope it will be helpful to those who watch this video even a little. I will try to reward you with better videos. Hope you enjoyed this video and if you like it, please share, subscribe, like ~~~ There are many other videos, so if you are interested, please watch. These days, comments are automatically flagged as spam and are often deleted. I will never delete it, so please do not make a mistake. If a comment is deleted within 1 minute, just write your e-mail address in the comment or request a drawing to my e-mail (treean.wood@gmail.com) and I will send it to you as soon as time permits. Thank you.
If you leave your email address, i will send you the drawing file. Thanks for your interest.👍 I hope it will be helpful to those who watch this video even a little. I will try to reward you with better videos. Hope you enjoyed this video and if you like it, please share, subscribe, like ~~~ There are many other videos, so if you are interested, please watch. These days, comments are automatically classified as spam and deleted frequently. I'm never going to delete it, so please don't get me wrong. If a comment is deleted immediately within 1 minute, please send a request for a drawing to my e-mail (treean.wood@gmail.com) and I will send it to you as soon as I have time. thank you.
Hola , vi tu videos y esta muy bueno y simple , gracias por los planos , sos el unico que mostro como tener todas las medidas , lo voy a hacer y despues te digo como salio , te escrivo desde Melbourne Australia , Soy Argentino de nacimiento y estoy aqui por 33 anios bueno ,te saludo nos vemos en otro videos tuyo ,chau
The requested drawing has been sent. Thanks for your interest.👍 These days, if "e-mail address" is included in a comment, the comment is automatically classified as spam and the comment is automatically deleted. If it is automatically deleted, it will be impossible to send the requested drawing because I cannot see it. If you would like to receive drawings, please request drawings by e-mail "treean.wood@gmail.com". Then, just write down in the comments, "I sent you a drawing request by e-mail," and I will check it and send it to you as soon as I have time. Thank you. I hope it will be helpful to those who watch this video even a little. I will try to reward you with better videos. Hope you enjoyed this video and if you like it, please share, subscribe, like ~~~ There are many other videos, so if you are interested, please watch.
Thanks so much i really liked your sander. I am going to try to make your design. Do you think this can be made slightly wider to handle 20-24 inch wide materials like a cutting board? This would greatly help in finishing after glue ups.
Отличный станок,только я бы добавил к нему каретку. Не всегда требуется шлифануть длинную деталь,бывают и короткие,и её кладут на каретку с упором за вал и за ручку вытягивают каретку на себя. Для этого у мотора должен быть реверс,так как вал должен будет вращаться против часовой стрелки,да и по технике безопасности этот вариант лучше,особенно если детали тонкие.
Thanks for the advice. 👍 I hope it will be helpful to those who watch this video even a little. I will try to reward you with better videos. Hope you enjoyed this video and if you like it, please share, subscribe, like ~~~ There are many other videos, so if you are interested, please watch. These days, comments are automatically flagged as spam and are often deleted. I will never delete it, so please do not make a mistake. If a comment is deleted within 1 minute, just write your e-mail address in the comment or request a drawing to my e-mail (treean.wood@gmail.com) and I will send it to you as soon as time permits. Thank you.
These days, if "e-mail address" is included in a comment, the comment is automatically classified as spam and the comment is automatically deleted. If it is automatically deleted, it will be impossible to send the requested drawing because I cannot see it. If you would like to receive drawings, please request drawings by e-mail "treean.wood@gmail.com". Then, just write down in the comments, "I sent you a drawing request by e-mail," and I will check it and send it to you as soon as I have time. Thank you.
Thanks for this excellent DIY tool. So simple and convenient to make. I followed with a slight different dimension. Work is in hand. Thinking to make two extra drums of different grits, the shaft mount top cap will be modified. Thanks, Regards & Love from India. Liked. Subscribed.
simple, practico y eficiente y muy bien elaborado diseño te felicito desde sonora Mexico
10 місяців тому
I am planning to build this. But I have a question. Is there a practical method to change the sanding paper? Not because it is worn out but sometimes you need to use different grades. With this setup, you either have to disassamble the cyclinder or untape the sand paper although it still has life in it.
Thanks for your interest.👍 I hope it will be helpful to those who watch this video even a little. I will try to reward you with better videos. Hope you enjoyed this video and if you like it, please share, subscribe, like ~~~ There are many other videos, so if you are interested, please watch.
This seems to be a very easy to build drum sander as I can see, it look simple enough that I am willing to attempt to build one. However, can I get the plans or measurements for this build from you. Thank you for sharing your ideas with others who like to build things as a hobby. TB5
Leave your email address in the comments and i will send you the drawing file. (You must leave your email address in the comments so that I can see it in the notification even if it is deleted.) Thanks for your interest.👍 I hope it will be helpful to those who watch this video even a little. I will try to reward you with better videos. Hope you enjoyed this video and if you like it, please share, subscribe, like ~~~ There are many other videos, so if you are interested, please watch. These days, comments are automatically flagged as spam and are often deleted. I will never delete it, so please do not make a mistake. If a comment is deleted within 1 minute, just write your e-mail address in the comment or request a drawing to my e-mail (treean.wood@gmail.com) and I will send it to you as soon as time permits. Thank you.
Nice idea and thanks for sharing the measurements, the only thing you could show with the caliber was that the faces were perfectly parallel. Can you confirm it for me? So I copy the project 😂😉
Leave your email address in the comments and i will send you the drawing file. (You must leave your email address in the comments so that I can see it in the notification even if it is deleted.) Thanks for your interest.👍 I hope it will be helpful to those who watch this video even a little. I will try to reward you with better videos. Hope you enjoyed this video and if you like it, please share, subscribe, like ~~~ There are many other videos, so if you are interested, please watch. These days, comments are automatically flagged as spam and are often deleted. I will never delete it, so please do not make a mistake. If a comment is deleted within 1 minute, just write your e-mail address in the comment or request a drawing to my e-mail (treean.wood@gmail.com) and I will send it to you as soon as time permits. Thank you.
Thanks for your interest.👍 I hope it will be helpful to those who watch this video even a little. I will try to reward you with better videos. Hope you enjoyed this video and if you like it, please share, subscribe, like ~~~ There are many other videos, so if you are interested, please watch.
The requested drawing has been sent. Thanks for your interest.👍 These days, if "e-mail address" is included in a comment, the comment is automatically classified as spam and the comment is automatically deleted. If it is automatically deleted, it will be impossible to send the requested drawing because I cannot see it. If you would like to receive drawings, please request drawings by e-mail "treean.wood@gmail.com". Then, just write down in the comments, "I sent you a drawing request by e-mail," and I will check it and send it to you as soon as I have time. Thank you. I hope it will be helpful to those who watch this video even a little. I will try to reward you with better videos. Hope you enjoyed this video and if you like it, please share, subscribe, like ~~~ There are many other videos, so if you are interested, please watch.
These days, if "e-mail address" is included in a comment, the comment is automatically classified as spam and the comment is automatically deleted. If it is automatically deleted, it will be impossible to send the requested drawing because I cannot see it. If you would like to receive drawings, please request drawings by e-mail "treean.wood@gmail.com". Then, just write down in the comments, "I sent you a drawing request by e-mail," and I will check it and send it to you as soon as I have time. Thank you.
These days, if "e-mail address" is included in a comment, the comment is automatically classified as spam and the comment is automatically deleted. If it is automatically deleted, it will be impossible to send the requested drawing because I cannot see it. If you would like to receive drawings, please request drawings by e-mail "treean.wood@gmail.com". Then, just write down in the comments, "I sent you a drawing request by e-mail," and I will check it and send it to you as soon as I have time. Thank you.
These days, if "e-mail address" is included in a comment, the comment is automatically classified as spam and the comment is automatically deleted.
요즘 댓글에 "메일주소"가 들어가면 댓글이 스펨으로 자동 분류되어 댓글이 자동으로 삭제됩니다.
If it is automatically deleted, it will be impossible to send the requested drawing because I cannot see it.
자동삭제되면 제가 볼수가 없어서 요청하신 도면발송이 불가능해집니다.
If you would like to receive drawings, please request drawings by e-mail "treean.wood@gmail.com".
도면 수신을 원하시는 분은 메일(treean.wood@gmail.com)로 도면 요청해 주시고
Then, just write down in the comments, "I sent you a drawing request by e-mail," and I will check it and send it to you as soon as I have time.
댓글에 "도면 요청을 메일로 보냈습니다." 이라고만 적어 주시면 확인후 시간나는데로 꼭 보내드리겠습니다.
Thank you.
감사합니다.
Hello friend, thank you for this project. I have sent you an email, pls send me drawings. Thank you
Thank you for this, I have sent you an email to request the plans 😊 one of the simplest diy drum Sanders I have seen on UA-cam!
I sent you a request by email
sent you an email request for the plans for this project. Thank you very much.
I have sent you an email.
اسبوعان وانا افتش باليوتيوب على تصميم الة سنفرة بوجود قياسات واطوال لغرض عملها ولكن بدون جدوى ؟! الان وجدت مأريد بهذا الفديو ؟ انا شاكر لك لدقة العمل وجماله وكأنه ناطق .. اضافة لدقة القياسات .. اشكرك لاسعادنا وندعي لك بالسعادة وزيادة المشتركين ؟ ولهذا اشتركت بالموقع ..🌺🙏🤝❤️
These days, if "e-mail address" is included in a comment, the comment is automatically classified as spam and the comment is automatically deleted.
If it is automatically deleted, it will be impossible to send the requested drawing because I cannot see it.
If you would like to receive drawings, please request drawings by e-mail "treean.wood@gmail.com".
Then, just write down in the comments, "I sent you a drawing request by e-mail," and I will check it and send it to you as soon as I have time.
Thank you.
This is the most clear DIY from sander video I've seen. I've been wanting to do one but I wasn't confident in the other designs I've seen. I think I will tackle this one! Thanks for the video, subscribing now!
Thanks for your interest.👍
I hope it will be helpful to those who watch this video even a little.
I will try to reward you with better videos.
Hope you enjoyed this video and if you like it, please share, subscribe, like ~~~
There are many other videos, so if you are interested, please watch.
These days, comments are automatically classified as spam and deleted frequently. I'm never going to delete it, so please don't get me wrong. If a comment is deleted immediately within 1 minute, please send a request for a drawing to my e-mail (treean.wood@gmail.com) and I will send it to you as soon as I have time. thank you.
The most precise up and down mechanism because it uses rails, rather than using bolts, I'm making it and it's 70� finished... Thank you for the video, greetings from Indonesia 🇮🇩
Hi, friend! Great project, good job. You are master!
Lifting system is very nice. Thank you for sharing this nice video.
Leave your just email address in the comments and i will send you the drawing file. (You must leave "just" your email address in the comments so that I can see it in the notification even if it is deleted.)
Thanks for your interest.👍
I hope it will be helpful to those who watch this video even a little.
I will try to reward you with better videos.
Hope you enjoyed this video and if you like it, please share, subscribe, like ~~~
There are many other videos, so if you are interested, please watch.
These days, comments are automatically flagged as spam and are often deleted. I will never delete it, so please do not make a mistake. If a comment is deleted within 1 minute, just write your e-mail address in the comment or request a drawing to my e-mail (treean.wood@gmail.com) and I will send it to you as soon as time permits. Thank you.
This is so good. My compliments on a great project and excellent workmanship. I gotta make one of these! Just what I wanted.
Great video, easy to follow. I would like to have plans. Thanks
Outstanding, nice work 🤩🙂
This is what I've been looking for! Thanks!
If you leave your email address, i will send you the drawing file.
Thanks for your interest.👍
I hope it will be helpful to those who watch this video even a little.
I will try to reward you with better videos.
Hope you enjoyed this video and if you like it, please share, subscribe, like ~~~
There are many other videos, so if you are interested, please watch.
These days, comments are automatically classified as spam and deleted frequently. I'm never going to delete it, so please don't get me wrong. If a comment is deleted immediately within 1 minute, please send a request for a drawing to my e-mail (treean.wood@gmail.com) and I will send it to you as soon as I have time. thank you.
Hola , vi tu videos y esta muy bueno y simple , gracias por los planos , sos el unico que mostro como tener todas las medidas , lo voy a hacer y despues te digo como salio , te escrivo desde Melbourne Australia , Soy Argentino de nacimiento y estoy aqui por 33 anios bueno ,te saludo nos vemos en otro videos tuyo ,chau
The requested drawing has been sent.
Thanks for your interest.👍
These days, if "e-mail address" is included in a comment, the comment is automatically classified as spam and the comment is automatically deleted.
If it is automatically deleted, it will be impossible to send the requested drawing because I cannot see it.
If you would like to receive drawings, please request drawings by e-mail "treean.wood@gmail.com".
Then, just write down in the comments, "I sent you a drawing request by e-mail," and I will check it and send it to you as soon as I have time.
Thank you.
I hope it will be helpful to those who watch this video even a little.
I will try to reward you with better videos.
Hope you enjoyed this video and if you like it, please share, subscribe, like ~~~
There are many other videos, so if you are interested, please watch.
Received the diagrams promptly upon request on Email! Thank you very much! Really appreciate the efforts! Keep up the good work! Cheers
대단한 아이디어 시네요.
드럼샌더가 필요하여 만들려고
여러 동영상을 보았는데..
최고인것 같습니다.^^
참고하여 만들어볼께요.
감사합니다.!!^^
관심 가져주셔서 감사드립니다. 👍
구독과 좋아요도 부탁드릴께요 ^^
다른 제품리뷰, DIY 영상도 많이 있으니 한번 구경오세요~~
영상 잘 보았습니다 .. 목공학원2달 정도 다녔는데요. 취미로 이것저저것 만들어보고 있습니다
영상보고 많이 배우겠습니다
감사합니다 .
관심 가져주셔서 감사드립니다. 👍
다른 제품리뷰, DIY 영상도 많이 있으니 한번 구경오세요~~
Muy genial, muchas gracias desde Colombia
손 재주가 좋으시네요.
좋은 영상 잘 봤습니다~
관심 가져주셔서 감사드립니다. 👍
다른 DIY도 많이 있으니 한번 구경오세요~~ ^^
This is the best drum sander video I have found. Simple but works great. can you please send me the plans. Thanks.
Muy bueno amigo, gracias por compartir. Saludos desde Argentina
I have sent an email requesting drawings. Great video!
Thanks so much i really liked your sander. I am going to try to make your design. Do you think this can be made slightly wider to handle 20-24 inch wide materials like a cutting board? This would greatly help in finishing after glue ups.
well-planned and equally well-executed project! thanks for sharing! Drawings please?
Muy bueno el trabajo, es de lo mejor que he visto. Muchas gracias. Le he pedido el plano.Gracias
Le agradezco mucho. Me envías los dibujos
Gracias
Отличный станок,только я бы добавил к нему каретку. Не всегда требуется шлифануть длинную деталь,бывают и короткие,и её кладут на каретку с упором за вал и за ручку вытягивают каретку на себя. Для этого у мотора должен быть реверс,так как вал должен будет вращаться против часовой стрелки,да и по технике безопасности этот вариант лучше,особенно если детали тонкие.
Thanks for the advice. 👍
I hope it will be helpful to those who watch this video even a little.
I will try to reward you with better videos.
Hope you enjoyed this video and if you like it, please share, subscribe, like ~~~
There are many other videos, so if you are interested, please watch.
These days, comments are automatically flagged as spam and are often deleted. I will never delete it, so please do not make a mistake. If a comment is deleted within 1 minute, just write your e-mail address in the comment or request a drawing to my e-mail (treean.wood@gmail.com) and I will send it to you as soon as time permits. Thank you.
Thank you, great construction, will contact you for plans. Much joy for you and your creations.
These days, if "e-mail address" is included in a comment, the comment is automatically classified as spam and the comment is automatically deleted.
If it is automatically deleted, it will be impossible to send the requested drawing because I cannot see it.
If you would like to receive drawings, please request drawings by e-mail "treean.wood@gmail.com".
Then, just write down in the comments, "I sent you a drawing request by e-mail," and I will check it and send it to you as soon as I have time.
Thank you.
Thanks for this excellent DIY tool.
So simple and convenient to make.
I followed with a slight different dimension.
Work is in hand.
Thinking to make two extra drums of different grits, the shaft mount top cap will be modified.
Thanks, Regards & Love from India.
Liked. Subscribed.
I would love to have a set of plans for this. One of the best videos on woodworking jigs. Thanks
That is just fabulous! I really think I will try it!
simple, practico y eficiente y muy bien elaborado diseño te felicito desde sonora Mexico
I am planning to build this. But I have a question. Is there a practical method to change the sanding paper?
Not because it is worn out but sometimes you need to use different grades. With this setup, you either have to disassamble the cyclinder or untape the sand paper although it still has life in it.
O yes, like this, one down to make i think.
Thanks for your interest.👍
I hope it will be helpful to those who watch this video even a little.
I will try to reward you with better videos.
Hope you enjoyed this video and if you like it, please share, subscribe, like ~~~
There are many other videos, so if you are interested, please watch.
Hi! what software use in the minute 1:38? Thank you!
good idea, excellent job. Like
Thanks for your interest.👍
I will try to reward you with better videos.
This seems to be a very easy to build drum sander as I can see, it look simple enough that I am willing to attempt to build one. However, can I get the plans or measurements for this build from you. Thank you for sharing your ideas with others who like to build things as a hobby. TB5
Leave your email address in the comments and i will send you the drawing file. (You must leave your email address in the comments so that I can see it in the notification even if it is deleted.)
Thanks for your interest.👍
I hope it will be helpful to those who watch this video even a little.
I will try to reward you with better videos.
Hope you enjoyed this video and if you like it, please share, subscribe, like ~~~
There are many other videos, so if you are interested, please watch.
These days, comments are automatically flagged as spam and are often deleted. I will never delete it, so please do not make a mistake. If a comment is deleted within 1 minute, just write your e-mail address in the comment or request a drawing to my e-mail (treean.wood@gmail.com) and I will send it to you as soon as time permits. Thank you.
Fabulous video! I have sent you my email for the drawings! Best, Alex
Can you please send me a page file for the drum sander I have been needing one for so long I love watching you.
❤ very good!
Nice idea and thanks for sharing the measurements, the only thing you could show with the caliber was that the faces were perfectly parallel. Can you confirm it for me? So I copy the project 😂😉
Leave your email address in the comments and i will send you the drawing file. (You must leave your email address in the comments so that I can see it in the notification even if it is deleted.)
Thanks for your interest.👍
I hope it will be helpful to those who watch this video even a little.
I will try to reward you with better videos.
Hope you enjoyed this video and if you like it, please share, subscribe, like ~~~
There are many other videos, so if you are interested, please watch.
These days, comments are automatically flagged as spam and are often deleted. I will never delete it, so please do not make a mistake. If a comment is deleted within 1 minute, just write your e-mail address in the comment or request a drawing to my e-mail (treean.wood@gmail.com) and I will send it to you as soon as time permits. Thank you.
질문이 있습니다. Haase 그라인더로 단단한 막대를 자른 후 사용하는 검은색 것의 이름은 무엇입니까?
관심 가져주셔서 감사드립니다. 👍
마우스 패드를 질문주신건지요 ?
아님 코팅방수합판을 질문주신건가요 ?
구독과 좋아요도 부탁드릴께요 ^^
다른 제품리뷰, DIY 영상도 많이 있으니 한번 구경오세요~~
@@TreeAnWood 👍
this is very cool , I am going to build one now, thanks so much :)
Thanks for your interest.👍
I hope it will be helpful to those who watch this video even a little.
I will try to reward you with better videos.
Hope you enjoyed this video and if you like it, please share, subscribe, like ~~~
There are many other videos, so if you are interested, please watch.
Great job. I would very much like the plans
The requested drawing has been sent.
Thanks for your interest.👍
These days, if "e-mail address" is included in a comment, the comment is automatically classified as spam and the comment is automatically deleted.
If it is automatically deleted, it will be impossible to send the requested drawing because I cannot see it.
If you would like to receive drawings, please request drawings by e-mail "treean.wood@gmail.com".
Then, just write down in the comments, "I sent you a drawing request by e-mail," and I will check it and send it to you as soon as I have time.
Thank you.
I hope it will be helpful to those who watch this video even a little.
I will try to reward you with better videos.
Hope you enjoyed this video and if you like it, please share, subscribe, like ~~~
There are many other videos, so if you are interested, please watch.
How many watts is the drill?
Do you ever have a problem of the roller slipping on the metal shaft?
scuff the rod with sandpaper and then epoxy it on
Hi from Portugal- This is a very nice video. I need from you the drawings please.
These days, if "e-mail address" is included in a comment, the comment is automatically classified as spam and the comment is automatically deleted.
If it is automatically deleted, it will be impossible to send the requested drawing because I cannot see it.
If you would like to receive drawings, please request drawings by e-mail "treean.wood@gmail.com".
Then, just write down in the comments, "I sent you a drawing request by e-mail," and I will check it and send it to you as soon as I have time.
Thank you.
I'd like a measured drawing if possible
These days, if "e-mail address" is included in a comment, the comment is automatically classified as spam and the comment is automatically deleted.
If it is automatically deleted, it will be impossible to send the requested drawing because I cannot see it.
If you would like to receive drawings, please request drawings by e-mail "treean.wood@gmail.com".
Then, just write down in the comments, "I sent you a drawing request by e-mail," and I will check it and send it to you as soon as I have time.
Thank you.
hello, I like your diy work very much, i have sent the email, thank you
Bonjour de France,
Très bon travail avec plans et dimensions
Merci pour le partage
MICHEL31
If you leave your email address, i will send you the drawing file.
Thanks for your interest.👍
Excellent video. I will build one. I have sent you my email for the drawings. Thank you.
Congratulations and thank you very much for your valuable content. Greetings from Chile. I sent you a drawing request by e-mail. Regards.
sent an email request for a copy of the plans, thank you so much
sent email last week, hope you can send me the plan
Thanks
I sent you a drawing request by e-mail. Thanks.
I sent you a request by email