Reset error 5B00, 5B01 (Ink absorber is almost full). Canon G1400 error 5B00, 5B01 Canon G1000 series, G2000 series etc. FREE without key, software… Enter Service mode: Step 1: First turn OFF printer, place papers on the tray Step 2: Press and hold Stop/Resume button Step 3: Press and hold POWER button. Step 4: Release Stop/Resume button, POWER still PRESSED Step 5: With POWER still PRESSED Hit Stop/Resume button 5 times Step 6: Release Canon POWER button, now printer goes in SERVICE MODE (and does not interacts with pc) Wait until the green LED does not blink again Step 7: Press Stop/Resume button 3 times, then press power button 1 time Step 8: Wait until your printer has finished printing the paper with the model, s/n, D= a number with percent of absorbers capacity. Step 9: Press Stop/Resume button 5 times, then press power button 1 times. Your printer will print a paper with only D=000.0 (empty absorber again) Step 10 : Press power button to off printer. Final turn on to test print. THANK YOU
Wow... among all the tutorials on UA-cam, Web, after all the search ... downloading numerous Canon Service Tool (most of then viruses, Trojans, etc.), click-baits, paid service, etc. This is the ONE that FINALLY WORKS. Watch the whole video to understand what he does step by step... Its basically... 1. Turn off printer 2. Turn on by printer by pressing both Power and stop buttons. Without releasing the Power Button, release stop button and press it 5 times, release both buttons (enters service mode) 3. After the printer stop making noises, press stop button 3 times and then power once. The printer will start making noises (Takes some time 5-10 mins), finally it prints a page(Printer Status). 4. The final step again is to press the stop button 5 times and then power once. (I think this step resets the Waste Ink Counter to 000.0) It prints the status. Done!! Works 100% Thank you.
Thank you so much for sharing this video and information. This have been very helpful and it worked for resetting my Canon G3000. More power and best of luck!
Thank you so much for sharing this video...i love you 😘😘😘 im so greatful coz the printer of my boss is fixed now....God Bless 😇 please more videos to share for helping others.THANK YOU
hi there. I tried to do the steps below from me me. until step 7 is fine. step 8 does not work becos printer did not print anything. Wonder what is the problem?
Step 6: Released Canon printer’s POWER button: Your Canon printer in SERVICE MODE Wait until the green LED does not blink again 0:35 its blinking continue sly........???
Reset error 5B00, 5B01 (Ink absorber is almost full). Canon G1400 error 5B00, 5B01 Canon G1000 series, G2000 series etc. FREE without key, software…
Enter Service mode:
Step 1: First turn OFF printer, place papers on the tray
Step 2: Press and hold Stop/Resume button
Step 3: Press and hold POWER button.
Step 4: Release Stop/Resume button, POWER still PRESSED
Step 5: With POWER still PRESSED Hit Stop/Resume button 5 times
Step 6: Release Canon POWER button, now printer goes in SERVICE MODE (and does not interacts with pc)
Wait until the green LED does not blink again
Step 7: Press Stop/Resume button 3 times, then press power button 1 time
Step 8: Wait until your printer has finished printing the paper with the model, s/n, D= a number with percent of absorbers capacity.
Step 9: Press Stop/Resume button 5 times, then press power button 1 times. Your printer will print a paper with only D=000.0 (empty absorber again)
Step 10 : Press power button to off printer. Final turn on to test print.
THANK YOU
Thank you from Romania! You save my printer G1400 and my health!!! You and Mozart.....
Wow... among all the tutorials on UA-cam, Web, after all the search ... downloading numerous Canon Service Tool (most of then viruses, Trojans, etc.), click-baits, paid service, etc. This is the ONE that FINALLY WORKS.
Watch the whole video to understand what he does step by step...
Its basically...
1. Turn off printer
2. Turn on by printer by pressing both Power and stop buttons. Without releasing the Power Button, release stop button and press it 5 times, release both buttons (enters service mode)
3. After the printer stop making noises, press stop button 3 times and then power once.
The printer will start making noises (Takes some time 5-10 mins), finally it prints a page(Printer Status).
4. The final step again is to press the stop button 5 times and then power once. (I think this step resets the Waste Ink Counter to 000.0) It prints the status. Done!!
Works 100%
Thank you.
Your comment was seriously helpful! Thanks
IT DOES WORK!! It took me several times to get it right but IT DOES WORK! Thank you so much for uploading this video. It fixed my Canon Pixma G3202.
Thank you so much for sharing this video and information. This have been very helpful and it worked for resetting my Canon G3000. More power and best of luck!
Thank you so much for sharing this video...i love you 😘😘😘 im so greatful coz the printer of my boss is fixed now....God Bless 😇 please more videos to share for helping others.THANK YOU
Thank you my printer are now back online!! G1010
Omg thank you very much im finding all source where i can reset my printer you save me from getting scold by my parents your a lifesaver i love you
el mejor del mundo, me has salvado, super genial tu tutorial.. besitos desde honduras
Helo sir, my cannon are steady on orange lighit and power botton same
What is solution sir?
did you fix the problem? Because I'm having the same issue here!
you saved my life.
Thank you very much. Work like a charm on G1000 Canon
God bless you.
\m/
Thank you, it saves my G1000
IT DOES WORK!!!! THANKS!!!!
Thank you bro.. you save my printer..may God bless you..
Thank you so much, it worked
It works!
Thank you so much! :)
Thank you!
Thanxxx a lot
Thx good
THANK YOU SO MUCH! It helped me fix my G1000.
Thanks. Problem Solved
Thank you boss... you are the man. hahaha.. my printer Fit again. G1000
شكرا
Thank you...❤️❤️
thank you! you saved our g1010 printer!
From iraq thank you very much 🌹🌹🌹
It actually helps to solve my problem !! just keep repeating these steps :) Thanks so much
Alhamdulliahirabilalamin Thanks Bro May Allah Bless You And Family.. Thanks Canon G2000
alhamdulillah.. bro u make my day.. thanks a lot now i can continue with my work..thumbs up
Thank you very much
wow!!! thank you ...you saved my life...printer is working fine now!!
hi there. I tried to do the steps below from me me. until step 7 is fine. step 8 does not work becos printer did not print anything. Wonder what is the problem?
after i enter service mode (hold power button, then 5 times on the other button) both lights are steady, green and orange. G1000
me too help
Your printer dont enter service mode successfully, pls try again. If it still fails, replace the main board or buy new printer.
me too
Me too orange light still on, in stepn2
Thank you so much.. work 100%..
alhamdulillah thanks bro....
Thanks
It worked. Thanks.
thank you...very helpful...
Thank you
Tq bro
Like and subscribe if the video is useful for you ! thanks
Why after i press the stop button 5 timrs, why is only the orange stop button only light? not the power button?
after i finish the step 6 and proceed to step 7 the printer turned off. i need help for this. thank you.
Thank you bro you make my day
Step 6: Released Canon printer’s POWER button: Your Canon printer in SERVICE MODE
Wait until the green LED does not blink again 0:35
its blinking continue sly........???
After completing 7th step, my printer got off. What should I do??
im facing the same problem! the printer shut off itself instead of printing the paper.
Same here
Thanksssßßsssssss
It doesn't work.
my printer turns of after step 7
What you did
Hindi cya nagana sa g1000 ko
The printer in my video is g1000. Try reviewing the video and read the description
Kailangan po ba naka-connect amg printer sa computer/laptop?
didn't work on my g1000 as well
please help :(
不用软件就可以?
No ! without software. Just follow the video or read description below
Omg thank you very much im finding all source where i can reset my printer you save me from getting scold by my parents your a lifesaver i love you
Thank you!