This is one of my most favourite clocks in your collection (and the most well known) I love how it has two winding Arbors but strikes on the quarters! It does the same thing as my Winterhalder and hofmeier! But mine does bim bam on the quarters :)
Nice chimes on it hope you get it running again you don’t have to take the whole movement a part just need to take the movement out of the case clean movement and oil the pin hole where gears connected on the Clock then hope it will run again. That what I do on my clock and works really well
This was requested by someone else. Also in order to submit requests, you have to fill out a google form to request a video. Link is in the description.
Nice vid, usually Clocks won't run because they're outta beat. However this clock may be worn and the bearing holes may have elongated. Or it may just be gummed up. The way to tell is by how Loud the tick is. Of it's gummed up the tick will be very quiet and un - percussive and it will stop in like ten minutes.
If I were you, I would go to a clock shop and get that clock fixed, I know that clock repairs can get expensive but I think it would be worth it because this clock that has been broken for about 10 years, it’s rare, & that your family has been very sad that this clock has been broken for years
Very nice clock and very nice sounding chimes. I noticed though that it’s a Westminster but it’s got to winding holes and not three why is that I don’t understand that? And I also noticed when you were setting it off so we can hear it it did all the charming sequences from quarter past half past quarter till but on the top of the hour it only struck and not played the full chimes like normal Westminster time clocks usually do can you explain that to me I’m just curious why only two winding holes and I know there’s a third for the speed of the clock which I know the end of that key has a place for But two winding holes but it’s a Westminster and on the top of the hour instead of the full time it just went right to strike. Because it usually plays the full-time Melody then to strike and then Westminster or three Chow Melody clocks usually have three winding holes half hour strikes like a gong or a single chime rod or a BamBam usually has two winding holes that’s what I’m trying to figure out but as always man your clocks are very beautiful I’m a clock person myself as I’ve told you before and I collect them I hope to get more one day and start a whole library for like yours
It's a special mechanism. It is known as the 3/4 clock since it doesn't do Westminster on the hour. I had first gotten this clock from a family member. The left key-hole runs all the chimes (including the strike), and the right does the time. It's probably the most rare clock in my shop.
I think i might know how get it running again take mechanism out and desemble mechanism and clean/oil worse thing can happen is rebush the mechanism and put in beat
It's sadly broken and it's unknown it it'll work again. I don't know how long it lasts, but I believe it could be an 8-day. It's not in beat but it'll be hard to repair it.
Nice vid. thank you for submitting my request. love you and love your channel. and also this clock
NOOOOO THIS CANT BE FIXED!!!!!! NOOOO!!!!!! NOOOO!!!!! I GOTTA TELL BIGFAN3919!!!!!!!!!!!!!!!!!!!!!!!!!!
@@ikiithecutestpony3269 😨😨😨😲😲😲calm down are you ok?
@@italianogeorgianomonoposto IT IS JUST A JOKE!!!!!!!
@@ikiithecutestpony3269 GOOD ONE😂😂😂😅😅😅
Me too
This is one of my most favourite clocks in your collection (and the most well known) I love how it has two winding Arbors but strikes on the quarters! It does the same thing as my Winterhalder and hofmeier! But mine does bim bam on the quarters :)
Nice chimes on it hope you get it running again you don’t have to take the whole movement a part just need to take the movement out of the case clean movement and oil the pin hole where gears connected on the Clock then hope it will run again. That what I do on my clock and works really well
It's one of the most unique clocks out there.
It's beautiful! I hope you get it fixed one day...
Congratulations clock tv for reaching 8,000 subscribers
It’s been over 2 years since I’ve done a video on this thing lol.
correction: 3
Really?
What happens if you swing the pendulum?
@@woodentrainseriesofficial9511 if it's overwound if you swing the pendulum it won't tick because it's overwound
It amazes me the ingenuity they had back then
Thank you for accepting my request
This was requested by someone else. Also in order to submit requests, you have to fill out a google form to request a video. Link is in the description.
THIS VIDEO IS KINDA LIKE A SCRATCH HAPPY STUFF OF DOGS 🐕
Nice vid, usually Clocks won't run because they're outta beat. However this clock may be worn and the bearing holes may have elongated. Or it may just be gummed up. The way to tell is by how Loud the tick is. Of it's gummed up the tick will be very quiet and un - percussive and it will stop in like ten minutes.
The movement isn't gummed up. The mainspring for the time side is defective.
@@ogClockTVthat's ashamed it's a really cool clock.
I love your videos, I feel sorry for the clock for you.
If I were you, I would go to a clock shop and get that clock fixed, I know that clock repairs can get expensive but I think it would be worth it because this clock that has been broken for about 10 years, it’s rare, & that your family has been very sad that this clock has been broken for years
What clock has been broken for about 10 years?
Have you tried oiled it with Mobil 0w-20 it will wake up the movement from sitting there for years
What is wrong with the clock that it doesn’t work?
@Anita Lacanlali oh that’s sad it’s my favourite one🙁
ALL THESE NEW VIDEOS ARE PRESENTED FOR DOGS 🐕 NOT OLD VIDEOS
You’re not making sense
WHAT'S INSIDE THE BACK OF THIS CLOCK A PENDULUM THAT SWINGS BUT IT STOPPED 😂 🙂🐕(scratching)
Very nice clock
Yes indeed!
TYSM
TYSM means thank you so much
Amazing clock!
That is sad, the clock does not run. Clock TV will not get it fixed. :(
Nice clocks!
Lovely clock! I love that its rare and unusual! Who did you get it from?
I think he got it from a family member
Yes. You are correct.
send it to me an i can restore it, just kidding, shipping too expensive. my favorite of your collection.
Lol thx
I have a Haller Westminster Chime Mantle Clock that sounds deeper than your HAC
TOO SCRATCHY FOR A HAPPY DOG 🐕
Very nice clock and very nice sounding chimes. I noticed though that it’s a Westminster but it’s got to winding holes and not three why is that I don’t understand that? And I also noticed when you were setting it off so we can hear it it did all the charming sequences from quarter past half past quarter till but on the top of the hour it only struck and not played the full chimes like normal Westminster time clocks usually do can you explain that to me I’m just curious why only two winding holes and I know there’s a third for the speed of the clock which I know the end of that key has a place for But two winding holes but it’s a Westminster and on the top of the hour instead of the full time it just went right to strike. Because it usually plays the full-time Melody then to strike and then Westminster or three Chow Melody clocks usually have three winding holes half hour strikes like a gong or a single chime rod or a BamBam usually has two winding holes that’s what I’m trying to figure out but as always man your clocks are very beautiful I’m a clock person myself as I’ve told you before and I collect them I hope to get more one day and start a whole library for like yours
It's a special mechanism. It is known as the 3/4 clock since it doesn't do Westminster on the hour. I had first gotten this clock from a family member. The left key-hole runs all the chimes (including the strike), and the right does the time. It's probably the most rare clock in my shop.
@@ogClockTV There’s a beautiful clock though but thanks for letting me know that was a quick reply. But yeah that is rare but very neat
I think i might know how get it running again take mechanism out and desemble mechanism and clean/oil worse thing can happen is rebush the mechanism and put in beat
ditto
sure hope it doesn’t need a rebush. from the little i saw it didn’t look like it.
It was also overwound, and I believe the springs are broken, so it'll be very hard trying to find replacements for it.
@@GodzillaZachary is that clock a hac clock
@@vintagesimplexfirealarmsof6440 yes it is. The title says that it is an HAC clock.
Nice Clock and Would you like to get a Howard Miller Trieste Floor Grandfather Clock?
Probably can’t afford it
why didn't you put a new movement for all clocks that don't work
I cannot find a new movement for this one.
Where is the new vid, waiting
I heard a howard millar regulator
Will this clock run and how long does it run for and is it in beat
It's sadly broken and it's unknown it it'll work again. I don't know how long it lasts, but I believe it could be an 8-day. It's not in beat but it'll be hard to repair it.
Is getting this one fixed very expensive?
Very likely yes.
3/4 Westminster Chime Clock
What happens if you swing the pendulum?
no 😂
Does this clock run
@@Youssef-iu8dn one of his older clock collection videos it sounded like it was ticking out of beat
No it does not run because it's overwound
I Need To Play My Among Us Game We Use That Later
Why this clock had a key and it dosent work?