Elevator / Lift Simulation Using HMI Mitsubishi GOT2000 and GX Works2 PLC Software FULL (PLC + HMI)
Вставка
- Опубліковано 21 сер 2023
- elevator simulation
this video will explain detail step by step how to make elevator PLC program and HMI
#elevator #hmi #simulation #mitsubishi #plc #plcprogramming #omron #kvstudio #siemens #schneiderelectric #allenbradley
I like for you lessons video 🎉
Thanks for watching this video...
Great video! This help me a lot, but I'm wondering if I use hardware instead of simulation the code for the elevator would be the same?🤔🤔
There's a little difference if you want try for real Elevator/Lift...
1. You must Change D0 and D1 with Output Y For UP/Down Elevator..
2. You Must Add Limit Switch Every Level Elevator and Use X address
@@automationlikerthanks alot
Please make more vedios
Ok..
Thanks for watching this video...
I've tried it directly on got2000, but it doesn't work, there's no movement from the lift, do I have to use a script?
1. Check your communication configuration with PLC
2. On 25:37 change maximum value from 100 to 10.000 (100x Higher)
Change Value Comparison 100x Higher too..
Ex. Before : > D1 K19
after : > D1 K1900
Do that thing for all comparison...
That because Increase data too fast if we use Real PLC and GOT
Hello what does < d1 k38 mean?
@@Yveszeng77 < D1 K38 Means Data D1 Less than 38..
For Comparison Detail tutorial Click This Link ua-cam.com/video/w3ErFSIZahs/v-deo.html
Or this link for Comparison GX Works3 Tutorial ua-cam.com/video/APi_QFNtzbM/v-deo.html
What meam of Level 3A Door
Level 3A = Level 4
sorry sir , could you give some info about this project ? i also have a related project with lift . thanks
This is Lift simulation project like real lift, if you push floor button, lift will move to that floor..
Ex. Ground floor
how can i contact with you ? i would like to ask you more , @@automationliker
@@automationliker could you gimme some file of this project, i'll pay
@@lamng.156 i'm sorry i can't,
You just watch full this video...
In this video PLC program and HMI have been explained in detail..
You can follow program PLC in this video...
how to learn this PLC for beginner
See my playlist JOB PLC Exercise...
That PLC exercise for beginner..
Maybe you can learn PLC from that video...
@@automationliker ok thanks
where are you from sir?
It's Confidential and Not important...
Please give a link for download Comment File
This video maybe can help you
ua-cam.com/video/ttKvhyMm0Ho/v-deo.htmlsi=0AhyEwJEh3oDIGBr
@@automationliker I need comment file which was used in this video
Not the video link for how to upload comments 😅
You just make comment manually one by one