for a top end overvoltage protection (and since you already have the classic/batteries there) by manipulating/stepping both power curves, you could use the classic to grab the machine (in parallel with the ginlong) to help protect the input of the ginlong from overvoltage. granted your upper end voltage on ginlong is below the max input of the classic. Just a thought. Good to see that inverter getting some use!
That *should* work, although I did somehow 'torch' a classic the other night attempting to do about exactly that thing... and I don't know why, it kinda makes no sense and I'm a little afraid to try again. I had the classic setup to start charging a little after the ginlong. Shortly after the point when both were producing (a little over 100VDC) the classic was producing about 300W and burned out. The inverter went into an error mode (UN-BUS) or something like that and stopped producing/put the turbine into free spin. I shut everything down, started back up and the inverter was fine. The classic had lost most of it's magic smoke though... again I'm confused as to why.
for a top end overvoltage protection (and since you already have the classic/batteries there) by manipulating/stepping both power curves, you could use the classic to grab the machine (in parallel with the ginlong) to help protect the input of the ginlong from overvoltage. granted your upper end voltage on ginlong is below the max input of the classic. Just a thought. Good to see that inverter getting some use!
That *should* work, although I did somehow 'torch' a classic the other night attempting to do about exactly that thing... and I don't know why, it kinda makes no sense and I'm a little afraid to try again. I had the classic setup to start charging a little after the ginlong. Shortly after the point when both were producing (a little over 100VDC) the classic was producing about 300W and burned out. The inverter went into an error mode (UN-BUS) or something like that and stopped producing/put the turbine into free spin. I shut everything down, started back up and the inverter was fine. The classic had lost most of it's magic smoke though... again I'm confused as to why.
Your blades are made with single wood or laminated wood???
What is diameter of magnetic plates and stator
12 inches and 14 inches respectively. There are other videos of this turbine here on my channel.
@dansshop single piece of wood use or multiple pieces of woods joints each other and than make blades
@@mianqaisar53 These ones are laminated but they wouldn't need to be!
@@dansshop thanks sir
This is the same turbine through the midnite classic for battery charging. ua-cam.com/video/mfWT5tPy7zM/v-deo.html