An alarm in this car is beeping it isn’t letting me use the hidden menu!! Could this be something to do with the main sensor plug behind the mirror? It’s hard to open and close ,it opened itself while parked up one night 🤔 who opened it is the question? Peace thanks for your video ✌️👍
I too was worried. Mine too reads 11.7 after a drive and 11.3 standing. I think we have to bear in mind that it will be lower than normal to power the screen, headlights etc. Comforting in knowing yours is the same. Checking at the terminals is surely more accurate Good video!
A great little tip there Dave, the needle sweep test is useful
Great help, thanks
An alarm in this car is beeping it isn’t letting me use the hidden menu!! Could this be something to do with the main sensor plug behind the mirror? It’s hard to open and close ,it opened itself while parked up one night 🤔 who opened it is the question? Peace thanks for your video ✌️👍
Kann man das einstellen dass die Nadeln sich immer bewegen bei Zündung ein?
does your car have blind spot detection or just reverse sensors?
Just rear parking sensors on this vehicle.
What does the different colour screens mean?
Testing for dead pixels I would guess
My battery is also 11.7, is it OK or does it need to be replaced?
Measure the battery voltage at the battery terminals with a meter to be sure, the car voltage readout can be inaccurate.
How to exit test mode?
I too was worried. Mine too reads 11.7 after a drive and 11.3 standing.
I think we have to bear in mind that it will be lower than normal to power the screen, headlights etc.
Comforting in knowing yours is the same.
Checking at the terminals is surely more accurate
Good video!
@@noname_20231 ignition off and on again goes to normal mode
My reads 12.2 not running you never want it below 12v
You don’t want it less than 12.6 ideally.
12.2V would be considered around 50% SOC.