2 years but this video is still relevant. If you are using Revit 2021, Structure and Steel Tab is hidden if you set your discipline into "Architecture" when opening up your Revit for the first time. You can show these tabs by going into File > Options > User Interface. Under "Tools and Analyses" check the tabs you want to show. Then hit OK.
Thank you Balkan Architect! I'm a General Contractor but I'm starting to dabble in Revit lately, looking to learn so I can slowly get away from the hard physical labor involved in my current job. I'm thinking of getting into Revit Structural and especially steel structures, this steel connections add on is great!
Nice video/s. Thanks for mentioning structural stuff. Connections are to be different at corner depending on what fixity level is desired. For and architect, its great.
Just FYI - The reason you had an error with the colum/beam connection on the portal frame structure was because the column needs to be rotated 90degrees (column parallel with the beam). The column should always be parallel to the beam so that it works within it's strongest axis.
I really appreciate Balkan architect, everyone should be like him always learning and adapting to new ways of life. I am seeing that you have actually put in some effort to pronounce beam properly. We should never get stuck on things especially various architects around the world who don't even have an idea about the BIM culture. YOU SIMPLY ROCK BRO!!
@Muh Hajir مهجر I don't know exactly what kinds is good for that, what is most important... But my laptop is an Inspiron 14 5000 of Dell. And the configuration: Processor Intel® Core™ i7 Windows 10, 64 bits NVIDIA® MX150 2GB GDDR5 Dedicated Graphics Card 16GB RAM Memory (1x16GB), DDR4, 2666MHz
@Muh Hajir مهجر Mine has worked well. But nowadays there are many good computers and laptops on the market. If you can buy those for gamers, I think they are better, they usually have good hardware and good graphics performance. Don't worry about your English, and you don't have to say sorry. When necessary just say that you are learning, that your English is in progress. 😉 No one is born knowing anything, everything is learned. I wish you good luck and have a great day! 😊🤗
Hey firstly great tutorial on show how Revit connection works, thank you for showing how it works before I head out and purchase it for myself. Secondly, as a structural engineer, it was really funny seeing you place unless connections beams and columns. I could have made drinking game from the amount of times you said "structural engineer" Lastly, I really like your little demonstration/showing of Revit 2019 and yes I got existed seeing that I can add joint connections in my models. Keep up the good work, cheers
Thanks BA, much appreciated. I am having an issue with loading base plate connections but I found some in a RVT file and not RFA. It seems like I need to copy them in. EDIT: VISIBILITY SETTINGS LOL!
Dude, thank you so much! I couldn’t figure out how to load the connections. It’s kind of dumb to have a tiny obscure arrow to load important stuff, but maybe that’s just me.
Hi! This tutorial helps a lot to understand how to create connections with steel structures so thank you for this tutorial !! However I have a question about connections: I am working on this subject and I would like to know if it's possible to create connections with wood frameworks. I tried with the same method than the video but it didn't work...
Hello Balkan Architect, well done , this video is very useful.just a quick question please, I use Revit 2017. I cannot find the tab - steel on the menu bar for Revit 2017 and I heard from your video saying something about plug -in, I cannot load all the the steel connections, please can throw more light on this please. I look forward to hearing from you. Thank you.
I am unable to split the horizontal beam like you showed at 13:49 . The split tool is not snapping that horizontal beam while if I tried to snap the other two vertical, it is working fine . Does any one have solution?
When you did your beam system, it appeared to place a beam on the external sketch line. My beam system never places one on the edge. What do I need to have set for this to happen?
Hallo, im trying to made conection between rafter steel castellated beam HC 600x200 to column steel WF, but eror. What should i do for fix it? Please help 🙏😭
Hi Balkan, Great video, i have a little problem i do everything like you did in the video but i can't see the connectons in any view even when i set the detail level to fine.
Hi Balkan, do you know with this warning "Invalid type or number of input elements" ??, I've tried using another PC and there is no problem when creating a steel connection, but with my PC that warning always appears, so I can't create any connection. can you help me, please? Thanks
Hey Sir! can you teach us how to use steel connections with a steel channel cause as I observed, all steel connection were only done for I- Beams or H-Beams only... Thank in advance Sir !...
How change the steel plate material. I changed plate of structure material from properties, then export to IFC file and open in solibri. But color didn`t change in solibri. How can I do that?
Hi Balkan Architect , what kind of software did you use to calculate structure load? I mean before you design structure in revit structure and analyze.
Hi Balkan Architect, dobre dan. I have the same problem like Sameer sam, I cannot find the "Steel" tab. I have the Revit 2018 as student version installed and need "Steel". How works this? Thanks,
Hi BA. Ive got a question. I see that once you add a connection of some sort, in realistic view, both beams & columns still are the original colour. for some reason, when i add any connection type to 2 steel members such as a miter to a column & beam, the column changes colour and i cant seem to figure out why. Please help me on this! regards
Thank you for the tutorial! Any idea how to attach channel (say C8) to beam (say W10) with a clip angle? Revit gives me a warning "The shapes for medium and fine detail levels of connected element are inconsistent". The beams are shown as connected, but no clip angles are produced.
dear sir i use Revit 2018. i installed the steel connections already from Autodesk but the connections are not shown, can you help me please how i can fix? thanks
I think your tutorials are very helpful and cant thank you enough but I have a quick question. I am still a student and designed a building without a real structural plan is it possible to add a structure to an existing model
Thank you so much balkan . But please can you make us railing for curved custom stairs ? Railing to be solid and fancy . Please please do that .. i din’t know how to make a curved good sweep .. like how can i pick 3D path from a stair ?
Hello Balkan, how are you? I speak to you from Argentina and I would need you to answer a question for me! What plugging is needed to make structural connections?
Login to your autodesk account - you will get profile and management tabs on top. Go to management. - click all products and services on left - select Revit (it will show your details. e.g. mine is a student version) - Go to updates and add ons (below left) - you can find 'Revit 2018 Steel connections' (many other add ons available) - click download..... If you don't have a licence, find this add on crack online. Hope it helps.
After downloading, restart revit - go to structure tab - connection arrow down - select all 'available connections' and add them to 'loaded connections'
@@bhardwajtablet8197 I can naot find it on my account. Have you got a setup or give link. Please help. endel83@gmail.com if you want to mail a setup.How you want but i need it.
Hey! First of all thanks for all of your tutorials, they've saved a lot of my time! But I have a problem - when I make a connection between steel beams/columns I can't make this connection visible! Revit just write that "The shapes for medium and fine detail levels of connected element are inconsistent". I've already tried to change visibility settings and detail level, but it didn't help! What should I do? Revit 2019.
Hello Sir, i want to know that how we will connect tube bar first one position in the Arch and second one position leaner, how can we connect both with plate and nut bolt. I have try many time but unfortunate fail every time
2 years but this video is still relevant. If you are using Revit 2021, Structure and Steel Tab is hidden if you set your discipline into "Architecture" when opening up your Revit for the first time. You can show these tabs by going into File > Options > User Interface. Under "Tools and Analyses" check the tabs you want to show. Then hit OK.
Thank U
Wow! Great video!! I'm a structural engineer and this is very exciting to me!
Thank you Balkan you are making Revit easy and easier every day.... we owe you big!!!
Thank you Balkan Architect! I'm a General Contractor but I'm starting to dabble in Revit lately, looking to learn so I can slowly get away from the hard physical labor involved in my current job. I'm thinking of getting into Revit Structural and especially steel structures, this steel connections add on is great!
Bro learn tekla
Nice video/s. Thanks for mentioning structural stuff. Connections are to be different at corner depending on what fixity level is desired. For and architect, its great.
Might be helpful to say that you should turn on the structural connections options in VG, or else you will not see any connections in 3D views.
Just FYI - The reason you had an error with the colum/beam connection on the portal frame structure was because the column needs to be rotated 90degrees (column parallel with the beam). The column should always be parallel to the beam so that it works within it's strongest axis.
Oh you was right :D Only focus on flow of lession so I did not found that reason.
i was wondering what was his reasoning for using the col in weak axis
I really appreciate Balkan architect, everyone should be like him always learning and adapting to new ways of life. I am seeing that you have actually put in some effort to pronounce beam properly. We should never get stuck on things especially various architects around the world who don't even have an idea about the BIM culture. YOU SIMPLY ROCK BRO!!
“We get these… lil two hooks. It looks, quite cool.” 😂😂
REVIT 2019 ITS AMAZING BRO, YOU ARE THE BEST
Great as usual 👌
Thank you once again. Your tutorials are always good. I learnt something today.
Another great video! Thanks Balkan Architect!!!
Thanks for this brand new steel tutorial!
AWESOME ! IT IS CLEAR AND CONCRETE
It was so clear to understand. Thanks a lot & Good luck with your career !
Man, thank you so much! You always help me a lot a looot! Хвала вам!
@Muh Hajir مهجر I don't know exactly what kinds is good for that, what is most important... But my laptop is an Inspiron 14 5000 of Dell. And the configuration:
Processor Intel® Core™ i7
Windows 10, 64 bits
NVIDIA® MX150 2GB GDDR5 Dedicated Graphics Card
16GB RAM Memory (1x16GB), DDR4, 2666MHz
@Muh Hajir مهجر Mine has worked well. But nowadays there are many good computers and laptops on the market. If you can buy those for gamers, I think they are better, they usually have good hardware and good graphics performance. Don't worry about your English, and you don't have to say sorry. When necessary just say that you are learning, that your English is in progress. 😉 No one is born knowing anything, everything is learned. I wish you good luck and have a great day! 😊🤗
this made my life so easy, thank you so much bro
This was so helpful!! Thank you
I love your videos man, your explain nicely.
Super... easy to understand
great work. i am really happy with this
This is what i wanted, thank you very much
Thank you for this tutorial.
Hey firstly great tutorial on show how Revit connection works, thank you for showing how it works before I head out and purchase it for myself.
Secondly, as a structural engineer, it was really funny seeing you place unless connections beams and columns. I could have made drinking game from the amount of times you said "structural engineer"
Lastly, I really like your little demonstration/showing of Revit 2019 and yes I got existed seeing that I can add joint connections in my models.
Keep up the good work, cheers
I m stuctural engineer and I learnt a lot from this vid 😉
So do i
Thanks brother! this really helped alot.
Great.. Simple And Deep...
Very helpful. Thanks.
Thanks for sharing knowledge 👌👍
Great video. Thanks 😊
Nice tutorial , thanks for sharing
Thanks BA, much appreciated. I am having an issue with loading base plate connections but I found some in a RVT file and not RFA. It seems like I need to copy them in. EDIT: VISIBILITY SETTINGS LOL!
You are amazing, thanks a lot !!
Just amazing!! Thank you so much!
I am your fan!
Dude, thank you so much! I couldn’t figure out how to load the connections. It’s kind of dumb to have a tiny obscure arrow to load important stuff, but maybe that’s just me.
awesome mate, tks for sharing
thank you sir its help me lot of
Hi! This tutorial helps a lot to understand how to create connections with steel structures so thank you for this tutorial !! However I have a question about connections: I am working on this subject and I would like to know if it's possible to create connections with wood frameworks. I tried with the same method than the video but it didn't work...
THANK YOU
Structual engineer deep inside of me likes this all very much... not probably. Definitely)
Thanks you so much
Thanks ❤ a lot sir
Hello Balkan Architect, well done , this video is very useful.just a quick question please, I use Revit 2017. I cannot find the tab - steel on the menu bar for Revit 2017 and I heard from your video saying something about plug -in, I cannot load all the the steel connections, please can throw more light on this please. I look forward to hearing from you.
Thank you.
Omoyemi Okeyinka find revit 2019 or 2020. Comes installed with the connections
This Video very well thank
谢谢你！学习了。
Awesome!
you are awesome
amazing
i got it .. thank u
Great sir
I am unable to split the horizontal beam like you showed at 13:49 . The split tool is not snapping that horizontal beam while if I tried to snap the other two vertical, it is working fine . Does any one have solution?
You are the best.. What about Vray 3.6 for revit.. REALLLYY NEEEED THIS TUTORIAL ONLY FROM YOU BALKAN PLEASE!
REALY BALKAN! PLEASE WE NEED THIS TUTORIAL!
really balcon
really bakc
Yes please
Always great job: It would be usefull a tutorial on cost estimation (BOM) for steel structures pleaseeeee!
Maurizio Q i agree
When you did your beam system, it appeared to place a beam on the external sketch line. My beam system never places one on the edge. What do I need to have set for this to happen?
Remove Beam System and add manually dragging new beams or use align command to move the beam...
Thanks Friend
Very good, wish you would do some over welds
Hallo, im trying to made conection between rafter steel castellated beam HC 600x200 to column steel WF, but eror. What should i do for fix it?
Please help 🙏😭
Sir kindly make a vidoe on creating cleat of steel connection
plzzz
Thank you for this tutorials. I learnt something today. i have model as per video. i have not found parameter. how to add parameters
Top!
Can i know the link for steel plugins? those apex haunch and everything
This is very useful tutorial video. Thank you so much and I can't to edit modify parameter. It's hide. Can u please explain
Hi Balkan, Great video, i have a little problem i do everything like you did in the video but i can't see the connectons in any view even when i set the detail level to fine.
PRESS V AND GO THE STRUCTURAL CONNECTIONS OPTION AND MAKE THEM ALL TICK MARK THEN PRESS OKAY.
@@MalikMuzzammil ty ty ty! couldn't see anything online as to why this was happening to me, your comment was v helpful :)
@@roccodangerpowers welcome welcome
Hi Balkan, do you know with this warning "Invalid type or number of input elements" ??, I've tried using another PC and there is no problem when creating a steel connection, but with my PC that warning always appears, so I can't create any connection. can you help me, please? Thanks
Hey Sir! can you teach us how to use steel connections with a steel channel cause as I observed, all steel connection were only done for I- Beams or H-Beams only... Thank in advance Sir !...
very nice video's! im starting to learn revit, any good suggestions which of your video's are good to start with?
ua-cam.com/play/PL1n-0H6b0FkWiumwbogDXiOGwy2_621gx.html
This might be a good place to start!
cool, thx for the quick reply!
the steel tap is only in the 2019 version?
Yes
How change the steel plate material. I changed plate of structure material from properties, then export to IFC file and open in solibri. But color didn`t change in solibri. How can I do that?
Hi You. Can you make a video showing how to create a new connection between H steel and H beam?
Hi Balkan Architect
, what kind of software did you use to calculate structure load? I mean before you design structure in revit structure and analyze.
i have difficulties with the property help, is not showing , am using the 2020 version can you help?
Hi in ms structure columnn how to make family of structure column with perforations keeping same distance?
Pls where can i find that specific column and beam ? I cannot find my rvt families in PC
Hi Balkan Architect, dobre dan. I have the same problem like Sameer sam, I cannot find the "Steel" tab. I have the Revit 2018 as student version installed and need "Steel". How works this? Thanks,
Find it in addons.
Hi Mr. Nice job. I have problem with revit, why they dont have connection of light gauge steel while its wide area for nowdays
The beam system doesn't give beams at boundaries.. Can you please show how are you getting the beams at the boundary?
Hi BA. Ive got a question. I see that once you add a connection of some sort, in realistic view, both beams & columns still are the original colour. for some reason, when i add any connection type to 2 steel members such as a miter to a column & beam, the column changes colour and i cant seem to figure out why. Please help me on this! regards
Thank you for the tutorial! Any idea how to attach channel (say C8) to beam (say W10) with a clip angle? Revit gives me a warning "The shapes for medium and fine detail levels of connected element are inconsistent". The beams are shown as connected, but no clip angles are produced.
dear sir i use Revit 2018. i installed the steel connections already from Autodesk but the connections are not shown, can you help me please how i can fix? thanks
How to apply connection on steel roof structure? Is it use the same method?
I can't make an automatic connection for castellated beams, what is the best way to solve this problem?
For when you loaded in the foundation how do you get that whole list of stuff, I don't have that
I think your tutorials are very helpful and cant thank you enough but I have a quick question. I am still a student and designed a building without a real structural plan is it possible to add a structure to an existing model
Thank you so much balkan . But please can you make us railing for curved custom stairs ? Railing to be solid and fancy . Please please do that .. i din’t know how to make a curved good sweep .. like how can i pick 3D path from a stair ?
how do i make tapered steel beam?
Hello Balkan, how are you? I speak to you from Argentina and I would need you to answer a question for me! What plugging is needed to make structural connections?
Is it possibile to have this add-ins with the education version of Revit?
Lorenzo si non ti rendi conto che sta lavorando con Revit alla versione studentesca, amico, sei nel posto giusto, ma nel momento sbagliato.
تشکر از شما
Hey bro, how to all those things in Revit 2018 because i do not have STEEL on my bar? Thanks
Login to your autodesk account - you will get profile and management tabs on top. Go to management. - click all products and services on left - select Revit (it will show your details. e.g. mine is a student version) - Go to updates and add ons (below left) - you can find 'Revit 2018 Steel connections' (many other add ons available) - click download.....
If you don't have a licence, find this add on crack online.
Hope it helps.
After downloading, restart revit - go to structure tab - connection arrow down - select all 'available connections' and add them to 'loaded connections'
@@bhardwajtablet8197 I can naot find it on my account. Have you got a setup or give link. Please help. endel83@gmail.com if you want to mail a setup.How you want but i need it.
How to put structural steel connections for non linear elements?
Hey! First of all thanks for all of your tutorials, they've saved a lot of my time! But I have a problem - when I make a connection between steel beams/columns I can't make this connection visible! Revit just write that "The shapes for medium and fine detail levels of connected element are inconsistent". I've already tried to change visibility settings and detail level, but it didn't help! What should I do? Revit 2019.
Hi, cool videos ;) Can I import the structure from robot with the calculated connections?
Sir what is the name of this softwer
hi guys, where is possible i download some families of steel structure?
In my revit i've only 1 bem and 1 column type.
how did you add the steel tab on panel????
Hello Sir,
i want to know that how we will connect tube bar first one position in the Arch and second one position leaner, how can we connect both with plate and nut bolt.
I have try many time but unfortunate fail every time
How to splice connection in top and bottom chords
I wish to see how can you connect tapered column and beam in steel structure. Can you do it?
hello , i don't have the option steel in my revit ! what can i do please ?
You have to install the add-on / extension. I think (almost sure) that you can get it from Autodesk for free if you are a student =)