This video is out dated. Ignore the computer and firmware parts of the video. I dropped HxC firmware for FlashFloppy, and I don't keep up with Hardware synths anymore.... So FlashFloppy might not be relevant, I am not sure.
In Uzbekistan, ensoniq TS 10 is really popular and trendy, because of the professionally made program with realistic instrument sounds and the perfect sounding in big spaces.
Man, I was fighting to get this very same driver to work on kurzweil k2500 and watching this video I noticed that the jumper was in the wrong place and....bazinga. Thanks mate.
Wow, this issue is what I have really expected for so long time...! I admire your restoration techs of TS to make them work good even today in 2020! Thanks Hank!
A PC with a internal floppy should read them. You have to use software like Ensoniq Disk Tools or Omnifloppy... Read the disk to IMG file... Flashfoppy Goteks will read the IMG.... HxC firmware Goteks need the IMG conververted to a .HFE file. Google "read Ensoniq disks to IMG". I don't mess with this stuff much. I'm a guitarist.
@@JeffHxC2001 the HxC Goteks I purchased in early 2020 didn't support IMG. I don't mess with my hardware much anymore. So I don't pay attention to what is going on now.
Thanks for posting this video. It really helped out with my issues with the gotek emulator . I did know what software to use . I still have issues with an old floppy drive that the Mac don't want to install the driver to . in order to get to files out of there floppy disk into my computer I probably just need an old computer depicts floppy disk . Perhaps you like some music it's data from Star trek.
No problem Gabriel. A old PC is best to do all of this stuff with. I can't do much on my Mac. There are apps to do everything with these files, but they are for PC.
I am looking at some of these emulators. There seem to be s lot of models out there. Some say they are for Ensoniq, Somme do not. Are they different, does it matter? I just got a TS12 and they had a bunch of floppy’s included (not factory). I tried loading something and it said discs not formatted. I tried to format one of them and it displayed the same message, so, I am not sure if it is working or not.
It might be a issue with the floppy drive. Ensoniq is real picky on what it will read also. It's a real headache getting them setup. The TS-12 Gotek should be the same as most of the others. The seller is using brand names to advertise. And sending out the same drive. All of my keyboards have the same Gotek in them.
@@RicardoRodriguez-fq5vs Yeah. Ensoniq boards are a pain to setup. I recommend joining the Ensoniq Facebook groups. There are a few people in those that can answer all of your questions.
This video is out dated. I switched to FlashFloppy Firmware, I found it better than HxC. I actually never play my hardware synths much anymore. I leave this video up because it gets views. Non of this stuff is Mac only.
Thank you for the video Hank, this makes we want to upgrade my TS-12 sample memory and dig out all my old floppy disks! Would you be able to provide a link to where I could buy the floppy emulator you installed? I’m in the US but I can’t seem to find the same black model, and want to get the right one. Keep up the great work!
Thanks Dave, I don't want to put external links on UA-cam, the "algorithm" doesn't like it. Go to Reverb and search for HxC usb. There is a guy named Shea Alterio (Night Crew) that sells them. He is in Cambridge, Mass. Tell him you want black. His disk images on the USB aren't worth a crap. You will want to make your own files for it to work right. I am uploading a VFX video next Friday... Watch that video! These Ensoniqs are real picky about what they will read. The VFX video next Friday will save you a lot of headaches. I don't have it edited yet. These drives are a real headache until you learn exactly how to do the files. Ensoniqs hate reading these. It's gotta be Just Right.
meu amigo seu conteúdo é incrivel, abraçcos do brasil! eu gostaria de saber a especificação deste flop drive emulator, porque existem varios modelos diferentes no mercado.
Obrigado meu amigo! Este vídeo tem alguns anos. Substituí o meu por uma versão de tela maior. Você pode comprar ambas as versões no samplerzone.com Tell them Hank sent you. lol.
Man, I haven't messed with my hardware in a few years. I think I upgraded this drive to one with a even bigger screen... I had to find it on eBay man. They were kinda hard to get. I haven't checked lately.
Thanks for that great tutorial!!! One thing I would like to know: is the drive read only for the TS-12 or is there also the possibilty to save sounds, sequence data, ... with it?
@@HankCoffey Hay posibilidad de que Usted me enviara la USB formateada para solucionar el problema de instalación, mi secuenciador es Ensoniq TS 12, dime cuánto cuesta este trabajo, trabajo la música y ya no me habré los diskettes. Te suplico me colabores por favor, gracias
My ASR-10 was the Fairlight CMI I always wanted, but better. I remember having to send samples via Appletalk to the ASR thru Propellerheads' Recycle. Painfully slow but worth it. Great video, thanks!
@@HankCoffey I downloaded that program HxCFloppyEmulator (plus like 6gb of sounds) and now the fun task of tuning them into useful files. Your videos have been very helpful. Thanks again!
I actually switched to FlashFloppy firmware on my Goteks. You can just load the IMG files. They don't have to be in HFE format. I never did a update video on the change.
Just found your channel, great stuff. I have a Ensoniq sd-1 and bought a gotek from ebay a few years ago but never got it to work on my keyboard. Did you buy an ADAPTED gotek drive or is it just a standard factory one. ? I`m from the u.k. Also did you have to format the usb stick differently to fat32 or something else? Thanks for your great videos.
Hey Brian. I have a VFX SD that I am installing a HxC in soon. That is basically a 1989 SD-1. On my Mac, I format the thumb drives to FAT32 (master boot). You can't manually put SD readable files on the HxC with any computer. The only way this drive works with the SD -1 is for storage only. The thumb drive has to have blank hfe images in it. The SD-1 will see these images as a blank inserted floppy. If you want downloaded sounds on this drive (sysex). You will have to dump the sysex onto the SD 1 through midi cables. And then save the banks to the virtual blank floppies on the HxC.
@@HankCoffey Thanks for that info, yes I manages to SYSEX a set of sequenced files from SD-1 to PC and then back which was brilliant, I have a lot of old Floppys with sequenced files I did but it sometimes crashes the SD-1 as they wont read properly with the keyboard floppy drive, I wanted to convert the disks onto a pc with a computer floppy drive and put on thumb drive so sd-1 will read them without crashing. Hope this makes some sense. :)
I think everything saved on the USB drive has to be by the VFX... I don't think it will read anything else. You'll have to load your sequences into the VFX by midi cables... then save to a hfe blank on the USB drive. I will be doing a VFX USB video in a few weeks. I'll check it out.
Yes. Same as a real floppy. The TS series doesn't save sample data. So it's read only on ASR/EPS sounds. TS saves user patches, sequences, and system data.
I don't think a TS will save samples. I think it only loads and plays them. I recommend asking on the Ensoniq Facebook groups. There is a TS group. They should be able to answer your questions.
They have to be flashed with firmware. Usually sellers do this already. They either use FlashFloppy or HxC Floppy Emulator. Both function about the same. I like FlashFloppy a little better. Unless a listing says it's flashed, might be safe to expect it isn't.
Help TS-10 question. I installed the USB Floppy Drive. I made an HFE file in the USB and opened it, but there is no response. I can't recognize it, is there any way?? What did I miss in the middle?? Windows 7 Help....
@@Live-br8sj the hfe has to be Ensoniq EPS format. The TS will not read a dos or fat floppy. By default, the software is set to make a standard format floppy. You have to select Ensoniq EPS from a menu box. And then create that image. It is possible you have a flashfloppy Gotek and not HxC. Flashfloppy is different. I hardly ever mess with my keyboards. I would have to get familiar with the software again to give specifics. I should show in this video how to select Ensoniq EPS format.
USB storage is a problem. I'm trying to format in ts-10 but it's not recognized. The error message is not formatted The computer works well, but the ts-10 can't because of the USB recognition problem. I think it will be solved just by recognizing the usb disk. I would appreciate it if you could tell me the name of the program.
Nice video! I wonder, what's the benefit to convert the IMG files to HFE ? I use the exact same Gotek with this HxC firmware on my TS12 and Gem S3 since years but i don't even remember to have started this software once 😅.
There is no advantage. It's better to leave them IMG. HxC used to not read IMG, only HFE. At the time of this video, I wasn't aware they could read IMG. I guess since 2017 HxC can read IMG.
@@babaloo21 There is old software that can do this. I think it requires an old PC with a floppy drive. I use Macs, so I do not know how to work with the physical floppies. I got the IMG files online.
@@HankCoffey Ok, i don't know if these old floopys are formatted on ms-dos.. if not, windows will not detect data, maybe Mac will detect, i must try, thank you 🙏
@Cesar Silva Ensoniq used it own format. It can not be read by a computer. Unless, you get a old software called Giebler or something like that. There are a few others that can do it. You should be able to Google everything you need to know. There are message threads on the topic.
This video is out dated. Ignore the computer and firmware parts of the video. I dropped HxC firmware for FlashFloppy, and I don't keep up with Hardware synths anymore.... So FlashFloppy might not be relevant, I am not sure.
In Uzbekistan, ensoniq TS 10 is really popular and trendy, because of the professionally made program with realistic instrument sounds and the perfect sounding in big spaces.
I've been meaning to do this to my TS12 for a long time. You covered everything I was needing to know, THANK YOU!
No problem, thanks Jon-Michael!
Man, I was fighting to get this very same driver to work on kurzweil k2500 and watching this video I noticed that the jumper was in the wrong place and....bazinga. Thanks mate.
Nice man, glad you got it working
Great installation, thanks Hank!
Thank you Christian!
Wow, looking good! I love it!
Thank you man!!!!
Wow, this issue is what I have really expected for so long time...! I admire your restoration techs of TS to make them work good even today in 2020! Thanks Hank!
Thanks Machine! I've always liked this keyboard. Alway will. I grew up in that era. 🙂👍
Hey Hank, thanks for your Video ! Question: Does the TS12 read VFX Sysex Files / Patches ?
Hey Allure, no they are 2 different Operating Systems. Not compatable.
I have a box full of TS-12 diskettes. How do I transfer them to the HcX Emulator? I don't think my Windows PC drive will read the Ensoniq diskettes.
A PC with a internal floppy should read them. You have to use software like Ensoniq Disk Tools or Omnifloppy... Read the disk to IMG file... Flashfoppy Goteks will read the IMG.... HxC firmware Goteks need the IMG conververted to a .HFE file. Google "read Ensoniq disks to IMG". I don't mess with this stuff much. I'm a guitarist.
@@JeffHxC2001 the HxC Goteks I purchased in early 2020 didn't support IMG. I don't mess with my hardware much anymore. So I don't pay attention to what is going on now.
Thanks for posting this video. It really helped out with my issues with the gotek emulator . I did know what software to use . I still have issues with an old floppy drive that the Mac don't want to install the driver to . in order to get to files out of there floppy disk into my computer I probably just need an old computer depicts floppy disk . Perhaps you like some music it's data from Star trek.
No problem Gabriel. A old PC is best to do all of this stuff with. I can't do much on my Mac. There are apps to do everything with these files, but they are for PC.
I am looking at some of these emulators. There seem to be s lot of models out there. Some say they are for Ensoniq, Somme do not. Are they different, does it matter? I just got a TS12 and they had a bunch of floppy’s included (not factory). I tried loading something and it said discs not formatted. I tried to format one of them and it displayed the same message, so, I am not sure if it is working or not.
It might be a issue with the floppy drive. Ensoniq is real picky on what it will read also. It's a real headache getting them setup. The TS-12 Gotek should be the same as most of the others. The seller is using brand names to advertise. And sending out the same drive. All of my keyboards have the same Gotek in them.
@@HankCoffey Thank you Hank. I appreciate the info.
did you know if TS10 and TS12 sound the same?
Yes, they do. The keybed, aftertouch type, and external chassis is different. The internals are the same.
Спасибо большое за видео
Пожалуйста 👍
Does this work with ASR-10 as well? Tnx
Yes, I think the OS disk will have to be made into a hfe file. In order to load from the USB drive.
@@HankCoffey mate, thank you so much!
@@manuelmurgano6464 no problem. Just remember the hfe files have to be made from the EPS DD format.
whats is the usb format?
Mine is in FAT 32. The drive reads the HFE files off of FAT. But the Ensoniq HFE images have to be in Ensoniq EPS. Ensoniq won't read FAT.
and for ensoniq asr 10 it can work?
@@RicardoRodriguez-fq5vs Yeah. Ensoniq boards are a pain to setup. I recommend joining the Ensoniq Facebook groups. There are a few people in those that can answer all of your questions.
Hola en donde comprastes ese emulator usb???
Ebay. A veces son difíciles de encontrar. Buscar Gotek.
Hi how are you? what gotek emulator model is it?
Hi Pavlo, I don't know the model. It had the oled display installed. I don't think it came that way. The firmware is HxC. That's all I know.
This will only work on macs
This video is out dated. I switched to FlashFloppy Firmware, I found it better than HxC. I actually never play my hardware synths much anymore. I leave this video up because it gets views. Non of this stuff is Mac only.
En donde venden ese emulator usb ?
eBay. Hay una nueva versión. Tiene una pantalla más grande.
Thank you for the video Hank, this makes we want to upgrade my TS-12 sample memory and dig out all my old floppy disks! Would you be able to provide a link to where I could buy the floppy emulator you installed? I’m in the US but I can’t seem to find the same black model, and want to get the right one. Keep up the great work!
Thanks Dave, I don't want to put external links on UA-cam, the "algorithm" doesn't like it. Go to Reverb and search for HxC usb. There is a guy named Shea Alterio (Night Crew) that sells them. He is in Cambridge, Mass. Tell him you want black. His disk images on the USB aren't worth a crap. You will want to make your own files for it to work right. I am uploading a VFX video next Friday... Watch that video! These Ensoniqs are real picky about what they will read. The VFX video next Friday will save you a lot of headaches. I don't have it edited yet. These drives are a real headache until you learn exactly how to do the files. Ensoniqs hate reading these. It's gotta be Just Right.
PERFECT EXPLANATION ON EACH STEP. REALLY APRECIATE YOUR HARDWORK !!!! KEEP DISCOVER ENSONIQ TS 12.
No problem, thanks Xorazm!
Great tutorial! I stuck in the middle
Thank you Richard!
How do I upgrade sequence RAM?
ua-cam.com/video/yH3HgK3nyjA/v-deo.html
Hi. Do you know how to erase folders on the flash drive while the drive is plugged up to the machine? Or do you have to use a PC application?
Folders and IMGs to be read by the Gotek are managed on a computer
Me es dificil actualizar mi teclado Ensoniq con usb floppy, te pido me ayudes por favor, gracias
Hola, tengo que usar un traductor para español. Intentaré responder cualquier pregunta que tengas.
meu amigo seu conteúdo é incrivel, abraçcos do brasil! eu gostaria de saber a especificação deste flop drive emulator, porque existem varios modelos diferentes no mercado.
Obrigado meu amigo! Este vídeo tem alguns anos. Substituí o meu por uma versão de tela maior. Você pode comprar ambas as versões no samplerzone.com Tell them Hank sent you. lol.
How can I get that upgrade drive. I am a proud owner of the TS-12
Man, I haven't messed with my hardware in a few years. I think I upgraded this drive to one with a even bigger screen... I had to find it on eBay man. They were kinda hard to get. I haven't checked lately.
Muchas Gracias! Thanks very much for educate us! Ensoniq Classic.
Thank you Lisandro!
Hi do these drives leave a hole in your floppy drive?
No, this drive replaces the floppy drive. Remove and replace.
Thanks for that great tutorial!!!
One thing I would like to know: is the drive read only for the TS-12 or is there also the possibilty to save sounds, sequence data, ... with it?
Oh sorry - I've noticed that you have answered this question in a post some days ago ;-)
lol, yep. It will do everything is does to a floppy disk.
Que lector le pusiste bro? Marca, modelo. Please
¿La unidad? Es un emulador de disquete USB Gotek. No hay modelo. Tienes que encontrarlos en eBay.
No existe HxcFloppyEmulatotSofware v2.2.2.2.1 por esta razón no funciona mi teclado ensoniq ts12
Este es un video antiguo. Recomiendo usar FlashFloppy. HxCFloppyEmulator no es tan bueno.
@@HankCoffey Mil gracias
@@HankCoffey Hay posibilidad de que Usted me enviara la USB formateada para solucionar el problema de instalación, mi secuenciador es Ensoniq TS 12, dime cuánto cuesta este trabajo, trabajo la música y ya no me habré los diskettes. Te suplico me colabores por favor, gracias
My ASR-10 was the Fairlight CMI I always wanted, but better. I remember having to send samples via Appletalk to the ASR thru Propellerheads' Recycle. Painfully slow but worth it. Great video, thanks!
Thanks man. Yeah there are a few Ensoniq utilities that can still make ensoniq format samples. WAV2EFE, Chicken Systems Translator. Stuff like that.
@@HankCoffey I downloaded that program HxCFloppyEmulator (plus like 6gb of sounds) and now the fun task of tuning them into useful files. Your videos have been very helpful. Thanks again!
I actually switched to FlashFloppy firmware on my Goteks. You can just load the IMG files. They don't have to be in HFE format. I never did a update video on the change.
@@HankCoffey Cool, I'll check it out!
Just found your channel, great stuff. I have a Ensoniq sd-1 and bought a gotek from ebay a few years ago but never got it to work on my keyboard. Did you buy an ADAPTED gotek drive or is it just a standard factory one. ? I`m from the u.k. Also did you have to format the usb stick differently to fat32 or something else? Thanks for your great videos.
Hey Brian. I have a VFX SD that I am installing a HxC in soon. That is basically a 1989 SD-1. On my Mac, I format the thumb drives to FAT32 (master boot). You can't manually put SD readable files on the HxC with any computer. The only way this drive works with the SD -1 is for storage only. The thumb drive has to have blank hfe images in it. The SD-1 will see these images as a blank inserted floppy. If you want downloaded sounds on this drive (sysex). You will have to dump the sysex onto the SD 1 through midi cables. And then save the banks to the virtual blank floppies on the HxC.
@@HankCoffey Thanks for that info, yes I manages to SYSEX a set of sequenced files from SD-1 to PC and then back which was brilliant, I have a lot of old Floppys with sequenced files I did but it sometimes crashes the SD-1 as they wont read properly with the keyboard floppy drive, I wanted to convert the disks onto a pc with a computer floppy drive and put on thumb drive so sd-1 will read them without crashing. Hope this makes some sense. :)
I think everything saved on the USB drive has to be by the VFX... I don't think it will read anything else. You'll have to load your sequences into the VFX by midi cables... then save to a hfe blank on the USB drive. I will be doing a VFX USB video in a few weeks. I'll check it out.
@@HankCoffey thank you, look forward to seeing them and learning something new :)
Are you able to save things from the keyboard to the floppy emulator?
Yes. Same as a real floppy. The TS series doesn't save sample data. So it's read only on ASR/EPS sounds. TS saves user patches, sequences, and system data.
@@HankCoffey thank you sir!
How do you SAVE a sample to another location, for example to an other USB thumb drive?
I don't think a TS will save samples. I think it only loads and plays them. I recommend asking on the Ensoniq Facebook groups. There is a TS group. They should be able to answer your questions.
@@HankCoffey Thanks, man, I still have a lot to learn. Can I save sequences to the floppy emulator?
@@vantasties yes, the TS will save sound presets, banks, and sequences. But I don't think it will save ASR samples.
Great video! Does it have to be flashed or is it fine the way it comes off amazon?
They have to be flashed with firmware. Usually sellers do this already. They either use FlashFloppy or HxC Floppy Emulator. Both function about the same. I like FlashFloppy a little better. Unless a listing says it's flashed, might be safe to expect it isn't.
@@HankCoffey Yea i agree. I love the videos. Wish you had a Asr-10 turtorial.
Best of vdo for TS-10 thank sir
Hey, thank you Kitphat! 🙂👍
donde lo compro
Search Gotek USB on eBay or Google.
hi you just put in the vx without flash the drive?
The firmware was already installed on the drive.
@@HankCoffey Vesa
very good
Thanks Floppy!
Help
TS-10 question.
I installed the USB Floppy Drive.
I made an HFE file in the USB and opened it, but there is no response.
I can't recognize it, is there any way??
What did I miss in the middle??
Windows 7
Help....
Even if I join Facebook and look for a related group, it doesn't come out
@@Live-br8sj the hfe has to be Ensoniq EPS format. The TS will not read a dos or fat floppy. By default, the software is set to make a standard format floppy. You have to select Ensoniq EPS from a menu box. And then create that image. It is possible you have a flashfloppy Gotek and not HxC. Flashfloppy is different. I hardly ever mess with my keyboards. I would have to get familiar with the software again to give specifics. I should show in this video how to select Ensoniq EPS format.
@@Live-br8sj right around 8 mins in this video. ua-cam.com/video/OCCJHap2wR4/v-deo.html you have to make Ensoniq EPS DD format.
@@Live-br8sj and you can create a new blank image on the ensoniq eps menu page also.
USB storage is a problem.
I'm trying to format in ts-10 but it's not recognized.
The error message is not formatted
The computer works well, but the ts-10 can't because of the USB recognition problem.
I think it will be solved just by recognizing the usb disk.
I would appreciate it if you could tell me the name of the program.
Nice video! I wonder, what's the benefit to convert the IMG files to HFE ? I use the exact same Gotek with this HxC firmware on my TS12 and Gem S3 since years but i don't even remember to have started this software once 😅.
There is no advantage. It's better to leave them IMG. HxC used to not read IMG, only HFE. At the time of this video, I wasn't aware they could read IMG. I guess since 2017 HxC can read IMG.
Depois Faça um Review com os timbres originais deste maravilhoso e lendário TS12 este teclado não e um teclado e um trator🥰
Eu faço nos meus outros vídeos. Assista aqueles. Vou tocar essa coisa com sons de banjo, se eu quiser.
What is the name of this TSD disk that contains this samples?
I am pretty sure they are from the SSD-100 and SSD-101 floppies.
@@HankCoffey Thx.. There are some way to recover data from the old diskettes to the PC and pendrive??
@@babaloo21 There is old software that can do this. I think it requires an old PC with a floppy drive. I use Macs, so I do not know how to work with the physical floppies. I got the IMG files online.
@@HankCoffey Ok, i don't know if these old floopys are formatted on ms-dos.. if not, windows will not detect data, maybe Mac will detect, i must try, thank you 🙏
@Cesar Silva Ensoniq used it own format. It can not be read by a computer. Unless, you get a old software called Giebler or something like that. There are a few others that can do it. You should be able to Google everything you need to know. There are message threads on the topic.
e
I have that exact same ceiling fan