RINGFEDER® Locking Assemblies - RfN 7006 & RfN 7012 in Direct Comparison
Вставка
- Опубліковано 29 сер 2024
- Uncompromising performance under extreme loads with specially developed RINGFEDER® Locking Assemblies for Bending Loads: One of the most challenging applications for our locking devices are belt drums which are used, e.g., in mostly large-scale conveyor systems for iron or copper ore, coal and other mineral resources. The shaft-hub connections used between the drum shaft and the drum base are subject to enormous additional stresses by axial and transverse forces and especially by bending loads which - in addition to the required torque - must be transmitted constantly and reliably. Therefore, RINGFEDER® Locking Assemblies for Bending Loads have been optimized in regard to material strength, surface quality and internal tension in order to effectively prevent e.g. shaft breakage, axial migration or plastic deformation of the drum base and thus cost-intensive repairs and production downtimes. The backlash-free, friction-fit locking devices ensure highest possible operational dependability in belt drum applications and are also convincing due to their easy handling as well as complete freedom from wear and maintenance.
Learn More:
- www.ringfeder....
#RINGFEDER #LockingAssemblies #KeylessShaftHubConnections
__________________
About RINGFEDER POWER TRANSMISSION:
We are the international leader in niche markets for drive and damping technology. Under our strong brand RINGFEDER® we offer users worldwide outstanding locking devices, damping solutions and coupling systems for the highest functionality and durability requirements in a wide variety of industries. We not only provide our customers with expert advice based on almost 100 years of experience and expertise, but also develop innovative, tailor-made solutions together with them - with our aspiration to be Partner for Performance.
Follow Us:
- The Engineer's Blog: blog.ringfeder...
- Website: www.ringfeder....
- Twitter: / ringfederpower
- LinkedIn: / ringfeder-power-transm...
- Xing: www.xing.com/c...
#RINGFEDER #PartnerForPerformance #LeaderInNiches
Very helpful explanatory video. Thank you.
Thank you very much for your commnet and support.
Two questions: 1. Isn't 7006 supposed to be mounted with the flange leaning on the end disc? that way it prevents the end disc from being pushed by the keyless locker. 2. 7012 is not self-centering, and the catalog recommends a centering bore in the back, how do you avoid runout during installation?