@@babastpmine is same as the one you are building its still in packet but don't have instructions only thing I came across was your video plus a exploded view video
Hello, it is difficulte to balance for a beginner but with some experimented people that can tell you if it is nose heavy or tail heavy, it fly great :) ua-cam.com/video/-pD6nZMcAio/v-deo.html My fly is here ;)
What kind of film did you use for the wing and control surface coverings? I just got the V2 and it didn’t come with any film, which surprised me. Also how did you glue it to the carbon rods? It looked like you used spray adhesive. Thank you in advance.
Hi ;) The film was a part of the kit, so you have to contact Banggood to ask him for re-send or refund you (I think they can send you an other full kid...) For the glue, I used a 3M glue I found in Bricorama, french DIY store. But I strayed it on the film and I think it was a mistake because the film looks ugly and the glue stick as steel :D
@@babastp Thank you. I found e film. It was rolled up and I thought it was an aluminum tube. 😂😇 I am think that spraying the frame instead of the body might be cleaner. I’m going to see what options I can find at the crafts store. Thanks!!!
Oh, and I've strayed the sheet of plastic but I have lost the transparency of the matérial. So I think it's better to spray the adhesive on the carbone structure ;)
I got the flat-wing V2 and shot an indoor video with it: ua-cam.com/video/R94Gt1a0UUc/v-deo.html Then I modded the wing with an airfoil shape like your V1 and it became faster, too fast to fly in the same room. I wonder if they switched to the flat wing to slow it down?
@@babastp That is what I expected, but I experienced just the opposite. I could not turn it sharp enough to fly in the room with the airfoil wing due to the higher speed making the radius of the turn wider. In a big room the V1 wing probably would have been an improvement. Happy flying!
Hi !! Oh thanks, I don't check my link every day :p You still have this board who works well ;) goo.gl/ENmGwp Or you still find the board on Alliexpress here : goo.gl/vnMAor
Merki :p Par contre j'ai été choqué !! La Xiaomi me prennait des photos quand je voulais faire un timelap, la FireFly, elle te le monte et te le pond terminé ton timelap :D Même pu rien à faire \o/
Hi :) No no it's just the glue :p I've put the glue the foil, and one piece of this (who I have to cut) stick to the wing. When I remove the undesired piece the glue come with ^^' But the wing is not damaged :)
Jimmy M Bien sur pour la vidéo ;) mais pas en FPV lol. Bah j'ai surtout transpiré quand j'ai senti le "crack !" de la baguette de carbone qui sert a faire la derive... Et quand j'ai essayé de réparer les dégâts a la pince après lol, mais tout été collé c'était même pas la peine... heureusement que j'avais deux kit sous la main...
Anyone know where to get instructions for this banggood no longer has it
Hi, I'll check this tonight ;)
www.docdroid.net/z2iEFq4/ty-model-black-flyer-v11-carbon-fiber-film-rc-airplane-with-power-system-1-pdf
Does it help you ?
@@babastpa bit yes it's a later version some things are different
Can you send a link with a picture of your plane ?
@@babastpmine is same as the one you are building its still in packet but don't have instructions only thing I came across was your video plus a exploded view video
Did it fly???
Hello, it is difficulte to balance for a beginner but with some experimented people that can tell you if it is nose heavy or tail heavy, it fly great :)
ua-cam.com/video/-pD6nZMcAio/v-deo.html
My fly is here ;)
How many grams is the servo ?
Hello, it's not specify bye the saller but it's under the 9g servo
I hope it can help you ;)
What kind of film did you use for the wing and control surface coverings? I just got the V2 and it didn’t come with any film, which surprised me. Also how did you glue it to the carbon rods? It looked like you used spray adhesive. Thank you in advance.
Hi ;)
The film was a part of the kit, so you have to contact Banggood to ask him for re-send or refund you (I think they can send you an other full kid...) For the glue, I used a 3M glue I found in Bricorama, french DIY store. But I strayed it on the film and I think it was a mistake because the film looks ugly and the glue stick as steel :D
@@babastp Thank you. I found e film. It was rolled up and I thought it was an aluminum tube. 😂😇
I am think that spraying the frame instead of the body might be cleaner. I’m going to see what options I can find at the crafts store. Thanks!!!
Ohh ok 😂 that's good. I hope you enjoy your very little pretty plane :p
I used 3M spray too. Yes, it must be sprayed on the frame.
Congrats, nice vid! I see that some soldering was needed, why? How does it fly?
Hi !! Thanks ;)
No solder, it's just to shrink the heath shrink tube.
It fly pretty slow ans when it's balance, it fly very well ;)
What adhesives are you using in the video?
Hi, I used SADER's Neoprene Adhesive. It's very effective, link here but in French goo.gl/Cr13uj
Oh, and I've strayed the sheet of plastic but I have lost the transparency of the matérial. So I think it's better to spray the adhesive on the carbone structure ;)
Thanks a lot
I got the flat-wing V2 and shot an indoor video with it: ua-cam.com/video/R94Gt1a0UUc/v-deo.html
Then I modded the wing with an airfoil shape like your V1 and it became faster, too fast to fly in the same room. I wonder if they switched to the flat wing to slow it down?
Hello,
I think the flat wing is faster because you don't have the lift effect. But I didn't try...
@@babastp That is what I expected, but I experienced just the opposite. I could not turn it sharp enough to fly in the room with the airfoil wing due to the higher speed making the radius of the turn wider. In a big room the V1 wing probably would have been an improvement.
Happy flying!
HI, the link for the receiver / servo card is no longer current - can you please tell me what make / model you have used? Thanks
Hi !!
Oh thanks, I don't check my link every day :p
You still have this board who works well ;)
goo.gl/ENmGwp
Or you still find the board on Alliexpress here :
goo.gl/vnMAor
Sympa! Hate de voir ca ^^
Quentin Vittenet moi aussi lol
rrrooh mais c'est super chouette !!! bravo ! ^^
Merki :p
Par contre j'ai été choqué !! La Xiaomi me prennait des photos quand je voulais faire un timelap, la FireFly, elle te le monte et te le pond terminé ton timelap :D
Même pu rien à faire \o/
Ouais mais ta xiaomi, elle te pond des cliché de 12mpx, que tu peux retravailler derrière pour avoir un timelapse d'une excellente qualité
eephyne C'est peut-être aussi faisable avec celle la faudra que je teste :p
Very nice
Thank you :)
Nice 😁😁
Thx ;)
6,9k vues🤤
Et ouai, j'ai pas beaucoup d'abonnés encore mais j'ai des vidéos qui tournent bien ;)
you bust the wing at 2:21 :(
Hi :)
No no it's just the glue :p
I've put the glue the foil, and one piece of this (who I have to cut) stick to the wing. When I remove the undesired piece the glue come with ^^'
But the wing is not damaged :)
Ah nice one, thanks for explaining - great video
No problem ;)
And you help me to improve my english :D
Look my others video if you like the multirotor too :)
Sinon, une ptite video quand ca vole !! , tu as du transpirer lors du montage
Jimmy M Bien sur pour la vidéo ;) mais pas en FPV lol. Bah j'ai surtout transpiré quand j'ai senti le "crack !" de la baguette de carbone qui sert a faire la derive... Et quand j'ai essayé de réparer les dégâts a la pince après lol, mais tout été collé c'était même pas la peine... heureusement que j'avais deux kit sous la main...