クモル145の動力化 Install motors into Kumoru145

TOMIX 鉄道コレクションのクモル145にモーターを組み込んで動力化しました。
動力台車はKATOのDT21、パンタグラフはTOMIXのPS16Pを使用しました。
線路には常にDC5Vの電圧をかけておきます。
送信機からBluetoothでクモル145を制御し、クモル145からは赤外線信号を出してクル144を制御しています。
RN4020は組み立てる前にセントラルとペリフェラルの設定をしておく必要があります。
前照灯・尾灯・室内灯はタクトスイッチで点灯・消灯させることができます。
青いタクトスイッチでパンタグラフを操作します。
走行中にトグルスイッチで方向転換すると、徐々に速度が低下して停止し、その後逆方向に加速します。
赤いタクトスイッチは緊急停止です。運転を再開するには一旦ボリュームを0に戻します。
I built a motor into the Kumoru145 from Tomix "Railway Collection" and powered it.
The power bogies are KATO DT21, and the pantographs are Tomix PS16P.
Always apply a voltage of 5V DC to the rail.
The transmitter controls Kumoru145 via Bluetooth, and Kumoru145 controls Kuru144 via infrared signal.
RN4020 needs to be configured for central and peripheral settings before assembly.
Headlight, Taillight and Coach Lighting can be turned on and off with the tactile switches.
The blue tactile switches operates the pantographs.
When you change direction with the toggle switch while driving, the speed will gradually decrease and stop, then accelerate in the opposite direction.
The red tactile switch is emergency stop. To resume operation, return the volume to 0.
【Circuit Diagram】
[Transmitter] drive.google.com/file/d/1w7XA...
[Kumoru145] drive.google.com/file/d/1-P5c...
[Kuru144] drive.google.com/file/d/1mlBe...
【Program】
[Transmitter] drive.google.com/file/d/1EmJE...
[Kumoru145] drive.google.com/file/d/11eT2...
[Kuru144] drive.google.com/file/d/1CmG6...
【RN4020 Setting】
drive.google.com/file/d/1j_e0...
【BGM】
Broken - Patrick Patrikios (UA-cam Studio Audio Library)
【twitter】
hashtag/_%E3%82%A...
.

[@wanderlinger6545]

相変わらず謎技術(褒め言葉)

[@kutakichi_]

ここまで凝っていながら、カプラーはおもちゃっぽいアーノルドのままっていうのがいかにもこの人っぽい

[@diorama111]

www

[@user-fh4ym5wm7o]

パンタを自動で上げ下げするの初めて見た！しかもNゲージサイズでここまでやるとは素晴らしい‼️

[@user-ee2ml4yx5g]

クモヤ22を持ってるけどワールド工芸でも
こんなにギミック盛り込めないのに…
模型に対する技術力が相変わらず凄すぎ

[@Onegi-eq]

こんなに小さなところに詰め込むなんて凄すぎます……

[@けーなな2606]

多分この人が世界で最初にNゲージのパンタグラフを電動で動くようにした人()

[@morehappys]

電車詳しくないんですが、動き始めの挙動とかリアルで素晴らしいです！パンタグラフ動くのは変態かとw

[@cyangokigoisu]

5:09　このモーターをNのディーゼルカーのエンジン部分に組み込んでだな、長大編成を再現したらかっこいいだろうなぁ。加速の感じとかまさにディーゼルカーっぽくて最高なんだが。

[@user-nl1ld9mr6n]

素晴らしい！！　感動しました。

[@trdam]

模型に命を吹き込むってこういう事なんだなあと…。

[@redanntube]

完璧な出来❣️

[@001tgv]

偶然お見かけしたのですが、あまりにも変態魔改造すぎて(最上級の賛美です)言葉がありません。
私ならパンタグラフの動作ロッド1ミリ幅のもの作ろうとするだけで挫折します。

[@diorama111]

ありがとうございます！
細かい作業なので何度も失敗しながら結構必死に作ってるんですよ😅

[@prashanthirwani8047]

He/she is a MASTER ... HATS OFF TO YOUR TALENT 🔥🔥🔥

[@野良の三毛猫]

素晴らしい

[@nscaledelights]

Wow this is amazing thanks for sharing it with us.

[@alexboon]

Wow..... what a craftmanship!!

[@sasharoco2491]

Просто загляденье👍🤝

[@sebastianthomas8507]

You are my awesome UA-camr bro I really waiting for this kind of video, especially small cars, etc.. i love electronics and i love to watch your videos, i am great fan of youuuuuuuuuuuuuuuuuuu

[@MegaBlackJoe]

masterpiece work. Thank you

[@andytrewin]

well done - nice presentation - thank you.

[@giokaimano8096]

You are great! You are a Genius! 👏👏👏

[@dmitriyfrolov6379]

New video, I very glad

[@danielkrogh9748]

awesome work

[@dz-abouttechnique1849]

Excellent!

[@vhofst]

Admirable!

[@bangdogamelife5121]

That's so cool 👍

[@Sohave]

This brilliant work makes me wonder if someone has made a DCC decoder for stepper motors?

[@Calaban619]

For a minute I was wondering how he was going to string live power lines over the tracks....

[@jakionline8423]

Perfect

[@J_Creative]

amazing,his also a programmer nice nice

[@piracik1978]

masterpiece!

[@f-p950]

魔改造中の魔改造(褒め言葉)

[@josepuchades8386]

👍

[@krisnadiimam4556]

superb!

[@robertravena]

Very nice work!! where did you get the motors from?

[@LUBY23]

素敵です

[@LUBY23]

見るたびに胸が騒ぐ。

[@hishin6180]

パンタグラフから集電して走る機構も作れそうですね

[@user-ll6qk6bh9i]

作った人居ますよ

[@tanaka_and_takahashi]

dccを（これは電波式だけど）自作している人を初めて見ました😂

[@Zwariowny]

Awesome :D

[@aneeshprasobhan]

amazing

[@peng_noi]

เจ๋ง

[@PMARC14]

This is such amazing and dedicated motorization work. A true showcase of skill. Also what Capacitor did you use? I assume that these electronics runs at 3.3v, so I would be super interested if you even added an above electrification rail to charge up that Capacitor

[@diorama111]

Thank you.
Supply 5V to the rail, and use 3-Terminal Adjustable Regulator to make 2.64V to charge Super Farad Capacitor (JUWT1105MCD). Then boost the voltage to 3.3V to operate the main circuit.

[@FIXDIY]

great

[@paulostrong1834]

Top amigão ✌️🇧🇷

[@jul.7490]

毎回良質な模型を製作していて凄いですね
モータや電子部品は通販や電器店で取り揃えているといった感じでしょうかね？
毎度興味があるのでどういったところで調達しているのか調べてみたりしますね(^-^)

[@diorama111]

ありがとうございます。
大体は通販で揃えているのですが、ステッピングモーターや超小型のフォトインタラプタやインダクタなどは壊れたデジカメを分解して取り外したジャンク品を使ったりしています。

[@AntonioBlok]

Ma sei favoloso!

[@timurhodizoda4564]

👍👍👍👍👍

[@shuttyskenzin9237]

Hi Mr, can you tell me where you get those model trains? (without motors and stuff just the model train with those wheels), Are they from takara tomy? Please send me the link for those model trains because i would also like to add motors and stuff.

[@Amrsingh]

How to wire the stepper motor and operate it can you make a separate video in detail if possible. Thanks

[@victor_glekler]

Nice work!
Do you use a driver for controlling stepper motors?

[@diorama111]

Thank you, I use DRV8835.

[@Joohomincho]

Amazing...

[@AllahKareem77]

U are amazing sir plzz teach me 🙏🏻❤️

[@A-M-i-R-A-L-i]

GOOD 🙏👌👌👌👌👌

[@GaussMathking]

3.9ミリ setpper motor はどこで手に入れることができますか。

[@diorama111]

数年前amazonで買ったのですが、今は売っていないようです。

[@djmips]

Why do you paint over the markings on the 3.9mm Micro Stepper Motor? 3:09

[@diorama111]

"8.0D" is painted on the motor. I don't know what that means.

[@3nglehart]

Quick question is there a difference with a stepper motor and a micro motor?

[@diorama111]

I think stepper motors are stable at low speed.
Especially when it starts to move, reliable speed control is possible.

[@3nglehart]

@@diorama111 how about high speed will it reach about 50-70kph scale speed? :D I'm thinking of stepper and micro combination.....

[@michalkortus6348]

Super 👍😲😍😍😉

[@wzlab]

1.27mm + Glass Epoxy，Where can I buy it? Can you send me a web link？ Thank you！

[@jikubo1134]

なるほどわからん（混乱）

[@betoriconunes3211]

Eu gostaria de comprar uma carreta dessa

[@user-ot7kt9eg8d]

あ、頭が追い付かねぇ!(笑)

[@Kho_LichteinsSaitoh]

メルクリンも走れる交直流HOゲージで、デッドセクションの通過を見てみたいな～！

[@ZuNunchaku]

what is the purpose of Photointerrupter ?

[@diorama111]

The photointerrupter is installed to grasp the state of the pantograph.

[@ZuNunchaku]

@@diorama111 is stepper already know the state? I dont understand why still use photointrrupter while using stepper

[@efraingbj]

I think the photointerrupter brings a "zero position" to set the steppers, if not, you would have to rely on measuring the current surge when the stepper stops at each end of the screw, but I'm not sure if the ATtiny microcontroller can achieve that. Cheers and great video btw!

[@efraingbj]

Maybe it is possible to store the last position of the stepper in memory so it is known each time that you turn the train on, but again I don't know if the microcontroller can achieve that, my knowledge in electronics is really rusty and a little bit outdated!

[@bharatmadhukar1984]

I ma from India .... Great video your.. I like it.
Can u send me this toy to India..

[@Sohave]

Not to be a killjoy, but I don't think people who build these very specialized and dedicated model trains are awfully keen on just mailing them to people who address them as "toys"

[@user-vz4ib3re6e]

？ドレミファインバーター音が？

[@user-xm9ge7ns5f]

此れは売れます。

[@viggo48sam]

🏁🏁🏁🇩🇰

[@usagi_Euph]

NNにいるやつ？

[@TheJavaSync]

Perfect