I don't see the advantage of using the M-Plex Block for this case... couldn't you just bypass either the Volume or the Wah block from scene to scene since they are in parallel?
@@MarcoFanton you can just turn the whole Wah-block off in one scene and in another scene you can have it switched on... that's what I was talking about. I think you mean something different.
@@julianelison8508 no because I want to decide to activate the Wha with auto-engage. When I swtich to the scene with wha it is not yet activated Your method force to have wha always ON in the specific scene. M-Plex blocks need very few CPU power. Of course you can use what you prefer.
Just found out this, very useful, thanks. One doubt: the volume control seems to act on the input, so before amp and effects. Which probably affects the overall sound. Can you think of any way to control the volume at the output stage, while still keeping the expression control for the wah?
ciao Marco sapresti dirmi come faccio a risolvere un problema con Expression pedal? quando seleziono il Wha, e vado giu co pedale, invece di lavorare di espressione come dovrebbe mi scende il volume - il source e' giusto, seguo tutto quello che c'e' da fare ma ho costantemente il Volume che va giu ogni volta che scendo col pedale. hai idea cosa possa essere? come faccio ad avere il pedale che lavori di espressione senza alterare il volume? grazie
Ciao Marco , il ho la mission sp1 ( qu’elle con il togolese switch e due Uscite) penso che dovrebbe essere possibile programmare per ingaggiare la wha schiacciando sullo switch? Trovo qualcosa sul tuo sito per la programmazione?
Thank you very much for the video. How would I connect two EV1 pedals one for the input volume and one for the WAH exclusively? I have bought all your FM9 bundle presets and was wondering how to activate the wah?I managed to set the volume but just can't seem to get around the wah? Please advice. Thank you Marco.
This is the basic use. if you have 2 pedals you have to put volume and wha in serie and assign pedal 1 to vol and pedal 2 to wha. Fro wha you have to activate the autoengage of course
@@MarcoFanton Thank you very much for your reply Marco. How do I activate the auto-engage? Sorry for being so ignorant. I am new to this product and still learning as much as I can. Thank you again.
A review is always welcome dear Marco. Thanks and happy Sunday. - Too bad for last night's concert. Even in Gorizia no rain !!!
Your tone is amazing
Come fai a cambiare i CANALI coi piedi??
that chorus sounds amazin!! what was it?
Cool thanks you ++ !!! How do you do to get the Tuner coming it self ?
ua-cam.com/video/p4RU078t3WM/v-deo.html
I was just thinking about this yesterday. How to do this without a switch. Thanks for this.
I don't see the advantage of using the M-Plex Block for this case... couldn't you just bypass either the Volume or the Wah block from scene to scene since they are in parallel?
How can you handle the auto engage of wha?
When I use Wha I want to decide when activate with auto engage
@@MarcoFanton you can just turn the whole Wah-block off in one scene and in another scene you can have it switched on... that's what I was talking about. I think you mean something different.
@@julianelison8508 no because I want to decide to activate the Wha with auto-engage.
When I swtich to the scene with wha it is not yet activated
Your method force to have wha always ON in the specific scene.
M-Plex blocks need very few CPU power.
Of course you can use what you prefer.
Just found out this, very useful, thanks. One doubt: the volume control seems to act on the input, so before amp and effects. Which probably affects the overall sound. Can you think of any way to control the volume at the output stage, while still keeping the expression control for the wah?
I use Volume as expression, not to control to rig volume.
If you want to place it after the amp you need two pedals.
ciao Marco sapresti dirmi come faccio a risolvere un problema con Expression pedal? quando seleziono il Wha, e vado giu co pedale, invece di lavorare di espressione come dovrebbe mi scende il volume - il source e' giusto, seguo tutto quello che c'e' da fare ma ho costantemente il Volume che va giu ogni volta che scendo col pedale. hai idea cosa possa essere? come faccio ad avere il pedale che lavori di espressione senza alterare il volume? grazie
Grande Marco!!! Grazie sempre per il tuo prezioso contributo!!!😉🤘🏻🙏🏻🎸💙
Grazie Marco Buono domenical 🦜🇮🇹🙋♀️
grazie Marco, molto utile, ora ho il controlo totale del mio pedale di espressione!
Ciao Marco , il ho la mission sp1 ( qu’elle con il togolese switch e due Uscite) penso che dovrebbe essere possibile programmare per ingaggiare la wha schiacciando sullo switch? Trovo qualcosa sul tuo sito per la programmazione?
si ho già fatto quel tutorial ancora per AX8
Thank you very much for the video. How would I connect two EV1 pedals one for the input volume and one for the WAH exclusively?
I have bought all your FM9 bundle presets and was wondering how to activate the wah?I managed to set the volume but just can't seem to get around the wah?
Please advice.
Thank you Marco.
This is the basic use.
if you have 2 pedals you have to put volume and wha in serie and assign pedal 1 to vol and pedal 2 to wha.
Fro wha you have to activate the autoengage of course
@@MarcoFanton Thank you very much for your reply Marco. How do I activate the auto-engage? Sorry for being so ignorant. I am new to this product and still learning as much as I can. Thank you again.
thank you so much
Always useful. Geart tutorial.👍
is the tuner in the heel (pedal 1 TRs mode) bypass (not mute) ?
yes
Great to hear you in English Marco... LOL
Hope all is well my friend!⚡🎸⚡
my english is funny for sure but I hope the tutorial is useful :D
@@MarcoFanton Oh yes, they are! You've saved me a lot time in a couple of instanes with these tutorials already ! Thanks!