Hi-Tech Diamond 10" Slab saw - Machine setup
Вставка
- Опубліковано 15 вер 2024
- Complete machine setup from start to finish. For more machine details, visit: bit.ly/2AUYQMy
Hi-Tech Diamond lapidary equipment and supplies
Website: hitechdiamond.com
Facebook: / hitechdiamond
Twitter: / hitechdiamond
This machine is awesome! I wish I had bought one years ago!
I own a 14” continuous feed oil saw from some other company, and this saw makes smoother cuts freehand with the thin sintered blade.
Assembly (and disassembly and cleaning) is easy; about 30 minutes total for setup and breakdown once you get used to it and figure out your system.
This saw has increased my production speed by a thousand times with no decrease in quality.
Buy a stiff brush to clean the mud out with and keep an old toothbrush handy to clear gravel from the table surface grooves and you are good to go! *and goggles! Definitely goggles!
You are going to need to prepare for slight mist/spray but it was nothing like the firehose my imagination conjured before I used it.
Thank you for your kind words! We are glad you are enjoying your 10" saw
This is a great auxiliary saw to my larger oil saws. I use with water only to hand cut multiple slabs from softer material and also use it to cut/downsize larger chunks of harder rough to fit better in my oil saws. It's all plastic and not too heavy. It's easy to drain into a bucket and after drained I take take it outside and hose it out. Great product!
Thank you and we hope that you enjoy your 10" saw for many years to come!
I'm excited 😊 and getting 🤗 ☺️
Perhaps one should tighten the nut on the blade.
I will get me one someday
Where can I buy 10 inch saw
You can purchase this 10" saw at hitechdiamond.com :)
is this saw also a trim saw?
We don't recommend this saw to be used as a trim saw. The blades are thicker, thus removing more material than a trim saw machine would.
@@HiTechDiamond thanks
Question can this blade be changed to smaller?!
No, the 10” saw should only be run with a 10” blade. The smaller the blade, the more water you need to fill the water reservoir, which can then cause water to leak into electrical parts if filled too high.
Hi-Tech Diamond
My dear hi, this machine looks fantastic. Would you please let me know the price and the ordering method/address? It will be appreciated.
@@gemmaster9369 It is a great machine! For complete listing details and ordering information, visit this link here: hitechdiamond.com/shop/10-inch-slab-saw/
Добрый день, а почему нет защиты для лица? Пальцы полюбому отпилишь, защиты нет.
Cost in india?
The cost of the 10" saw in the 220 volt model is $799.00
Not a good video! Dies not show details or explain! You show 2 washers, I have 4! Mine is not already assembled to be disassembled to put the blade on. I have to put it together. This is not a good assembly video
Hi there! Thanks for your feedback. This video was made a few years ago and since then, we have updated the 10" saw assembly. We plan on producing more videos in the near future. For the meantime, please follow the instructions that were included with your machine.
Mine was not already assembled like this either. And the instructions were very vague so I actually looked at the pictures. I had to do the same thing with my cabbing machine. I could not understand the instructions as they were incomplete, tiny and blurry and so I just looked at the pictures.
@@bettamom7593 Please contact us direct at sales@hitechdiamond.com so that we can assist you with the setup of your saw.