I bought mine still in the crate unassembled. I used part of the crate to build a nice workbench that sits right over the top of the motor. Makes for a nice place to set a round or two. Also easily deflects stray splits. Enjoyed your video!!
Nice modification! I've been looking at that Champion 27T, but with a Honda GX engine. Our local store is clearing them out for nearly the same price as the ones with the Champion-branded engines, so I'm thinking it is time to pull the trigger. I've thought the table was too small and figured I'd have to enlarge it somehow...yours gives me some good ideas! 😎👍
I made mine a little bigger out of a piece of plywood and a leg of 2x4. It just slips into place and locks when needed. The idea of a permanent one is interesting now that i have a welder.
@@SevenOaksOutdoors If it was that way "from Champion" it's because whoever assembled it did NOT read the manual! The large "catcher" on the motor side is supposed to be angled up...of course. HOWEVER...the small one on the operator side is supposed to be angled DOWN...the manual even shows a diagram that points out correct and incorrect assembly! See page 19 here: www.championpowerequipment.com/wp-content/uploads/2017/08/100424-om-english.pdf
I bought mine still in the crate unassembled. I used part of the crate to build a nice workbench that sits right over the top of the motor. Makes for a nice place to set a round or two. Also easily deflects stray splits. Enjoyed your video!!
Cool table, now ya gotta do the other side to protect the filter and hoses... Stay cool brother... Peace...
Nice modification! I've been looking at that Champion 27T, but with a Honda GX engine. Our local store is clearing them out for nearly the same price as the ones with the Champion-branded engines, so I'm thinking it is time to pull the trigger. I've thought the table was too small and figured I'd have to enlarge it somehow...yours gives me some good ideas! 😎👍
Tough to beat a Honda! I’d do it!
I made mine a little bigger out of a piece of plywood and a leg of 2x4. It just slips into place and locks when needed. The idea of a permanent one is interesting now that i have a welder.
Great mod thanks for sharing brother 👍
No problem 👍thanks for watching!
Приветствую. Какой диаметр гидроцилиндра?
Flip the small one over...like it's supposed to be....and you'll see it will work better!
The original yellow wings are mounted upside down. They should be flat, not angled up like that.
That’s the way it came from champion. It works great! Thanks for the comment.
The wings angled up keeps the wood from rolling off, duh.
i STRONGLY dis-agree....!
@@SevenOaksOutdoors If it was that way "from Champion" it's because whoever assembled it did NOT read the manual! The large "catcher" on the motor side is supposed to be angled up...of course. HOWEVER...the small one on the operator side is supposed to be angled DOWN...the manual even shows a diagram that points out correct and incorrect assembly! See page 19 here: www.championpowerequipment.com/wp-content/uploads/2017/08/100424-om-english.pdf