YOU, my friend, are a Saint for making this video. 🙏🏾 It was so much easier to follow along with versus those vague and somewhat intimidating paper instructions. Thanks again and keep up the good work.👍🏾This is a nice solid storage unit and I'm using it for clothes in my basement 😊
Me and my dad used this video to put this thing together.. I would say the video explains the whole thing well .. the instruction manual is in fact accurate but takes abit to take in as its mostly diagrams and no words. Save yourself the hassle and watch this easy step by step 🎉😊
Thanks to your easy-to-follow video, my husband and I - who avoid all assembly products - were able to complete this deck box in less than 30 minutes! We may even venture another such project…
Hi, we are assembling as I type. Box came broken with no instructions. Tried Keter Web site and printed up what we thought were the instructions. Gave up. Went to youtube and found your video. We have to stop and start because it goes so fast, but your the man. We could not have done this without your video. Product is great, using it for outdoor pillows etc to keep the critters from making their home in the pillows in winter. thank you.
Thank God for your Video. Mine did not come with the instructions but from the reviews even if they had apparently they were hard to Follow. So your video was a lifesaver thanks so much
I've had dozens of comments that this deck box had no instructions! It's amazing they wouldn't pack the all important instructions and even the typical hazards and troubleshooting as well. Glad to have helped! Thank you for watching and if you subscribed thank you as well!
Awesome video! It only took me a couple minutes longer to assemble my box than it did to watch your video thanks to your awesome and well presented steps. I was one of many folks that didn't get any instructions (or even stickers on my box!!!) and you helped me immensely. Instant subscription and like here. Keter should be paying you for every view you get!
This was not a easy assembly until I found your video. The instructions included were useless. I had to basically hammer the rods through then it was a piece of cake. Thanks, you get a thumbs u[p and a follow
Thank you so much. Your vid was a life saver. Mine came without instructions and the one the company provided was only partial. I saw a few vids on the assembly but yours was the quickest and easiest. Thumbs up!
Thank you for the easy to follow instructions. This is my first time building some thing of this magnitude by myself with no help and without your video I would’ve been totally lost. I didn’t even need an extra set of hands.
Hey everyone welcome to another video from our Ultimate Outdoors Playlist. We normally upload tech related videos but once in awhile we like to do something a little different. We hope you enjoy! Thanks for watching!
Have you guys much feedback on water resistance? I’m putting one together and think I might through some waterproofing into it. I’m thinking a couple of tubes of silicone caulk, or a roll of butyl tape…and some rubber gasket for the lid. Anyone have any suggestions?
First let me tell you I'm a 62 yr old with arthritis. 2nd my box arrived with no instructions. 3rd your video made this task so simple. It was easy. I needed a small hammer to tap the rods in but it was a breeze. Thank you for your help.
It was $30 off at Sam's- because it was a return. No instructions and some extra parts (!?!). My wife and i were trying to put it together sans instructions and I found your video in time to save our marriage! Thanks so much for documenting this!
Yes absolutely, I keep all of my pool chemicals, pool supplies and yard tools inside and no water or dust or dirt. Thank you for watching and for the kind comments.
I am trying to find a storage solution for some of my power tools. I live in a small house, and I've amassed a large collection of tools that just can not fit in my walk-in closet any longer. My issue is I rent, and I don't want to build a shed, and I'm afraid that these storage boxes would leave my tools susceptible to corrosion. It's better than just covering with a tarp, but still. Looking for suggestions?
Thanks for the video❤. Will the hydraulic latch work once it's installed. Because when I open the latch to install, I don't know how to close it😢😅 thanks
I agree with James Holt that the instructions were almost useless. I’ve been seeing instructions like this, more and more, that are devoid of any text. Many times the pictographs do not always helpful. At first, I thought this video was missing a step. In this box a metal support for the lid ‘slides’ in. On mine, the metal support is screwed in. I don’t it matters. This is a huge box. Funny that at Sam’s Club it’s about $75.00 cheaper that online price at Wal-Mart. 😮
hello, i have the same box. i'm moving now and i need to disassemble it for storage. it doesn't look like it will and there is no tabs to press to unsnap the sides. could you check it out and see if you could disassemble it?
OK I made a stupid mistake and need help. I snapped the 2 short side pieces into the back piece before sliding in the metal bar. I can't get them to unattach. I've tried a screwdriver and crowbar but afraid of breaking the plastic. Any suggestions?
But, try and disassemble if you went out of sequence you can’t take it apart Ok I was able to squeeze it in it is all together now and I like what I see it looks good too 👍
With all of those ridges from the exposed structural grid pattern on the inside will make it very hard to clean and hard to keep dry so mold and milder will grow inside it. Still on the lookout for an outdoor storage container with a smooth easy to clean interior. Let me know if anyone knows of anything please and thank you
I have the 110g storage box but I cannot work out where the metal openings attach. The image in the instructions is not clear, and you cannot see on video.
Just insert the rods on the RIGHT side to go LEFT and push thru. Those bottom feet are numbered as well. Not done assembling mine as it's dark outside now.
My box came without instructions. I followed your video up until you installed the lock latch. I don’t know which one that is. Neither pieces I have look like it’s right.
I have never dismantled that box. I assume it can unsnap but I don't know for sure. Just take your time. Good luck and let me know f it can be dismantled so I can add it to the description.
@@UltimateTechHub I tried using the floor to help me force it back in, but the plastic then just started to crack. So I’ll be taking this back. What a waste of 2 hours.
In the midst of assembly and came across an issue in Step 5. In Step 2 the schematic clearly shows that the metal reinforcing beams insert with the open side of the channel to the outside of the box. In Step 4 the schematic depicts the closed side of the beam towards the inside. However when you get to Step 5 where the 2nd long side wall is snapped into place on the short side wall the drawing depicts the beam with the open side towards the inside of the box. Since disassembly is not possible or very difficult I stopped there. You FF’d through that step but on review it appears the open side is to the outside of the box on both sides of the box. Hope that is correct.
The metal beams where difficult to insert that's for sure. And I think the schematic may have been printed incorrectly because the way I assembled it worked perfect. I've had no issues with it and works exactly the way its supposed to. Hope this helps clear your mind of any worries. Thanks for watching.
Thank you for the review, however the most important information for me is missing. What is the internal dimensions for the deck box? All the other dimensions are clearly presented all the places around, including your review. But internal are missing and I could not find it unfortunately. I would appreciate if you could share this information with us.
Seems like these boxes don't come with instructions because I've had dozens of comments about no instructions! Lol. Thank you for watching and enjoy the deck box!
The hardest part for me was getting the screws to screw in straight. One section of a side was cracked when I received it. Too much of an ordeal to replace.
I’m currently waiting for a reply from someone at customer service my deck box came cracked and the bottom piece is broken and since I already installed the sides I can’t get them apart to return the item. I’m livid
@@UltimateTechHub They got me a new box but I have to take this one apart to ship it back to them any ideas how to disconnect the side panels. I tried a crow bar to gently pry it open, screwdriver and a paint scraper lol no luck so far.
I took the caps off the end was able to use a screwdriver to chisel the inside piece that snaps together enough where I could get them to pry apart with a use of a flathead screwdriver. I did it very carefully and by myself and didn't damage it. I was able to put it back together with no problems.
![[UA] NAVI vs MOUZ | BO5 | IEM Rio 2024](http://i.ytimg.com/vi/CMBYk0cbGoA/mqdefault.jpg)
Excellent tutorial ❤
Thank you! 😊
YOU, my friend, are a Saint for making this video. 🙏🏾
It was so much easier to follow along with versus those vague and somewhat intimidating paper instructions. Thanks again and keep up the good work.👍🏾This is a nice solid storage unit and I'm using it for clothes in my basement 😊
Thank you for watching and if you subscribed thank you as well.
Me and my dad used this video to put this thing together.. I would say the video explains the whole thing well .. the instruction manual is in fact accurate but takes abit to take in as its mostly diagrams and no words. Save yourself the hassle and watch this easy step by step 🎉😊
Thanks to your easy-to-follow video, my husband and I - who avoid all assembly products - were able to complete this deck box in less than 30 minutes! We may even venture another such project…
That's great! Congratulations and enjoy the deck box and any future assembly projects. Thank you for watching!
Hi, we are assembling as I type. Box came broken with no instructions. Tried Keter Web site and printed up what we thought were the instructions. Gave up. Went to youtube and found your video. We have to stop and start because it goes so fast, but your the man. We could not have done this without your video. Product is great, using it for outdoor pillows etc to keep the critters from making their home in the pillows in winter. thank you.
Glad to help and thank you for watching!!
Oh my!!!! Thank you so much my husband was at work. Your video saved me!!! 👏 👏 awesome 😎
Great video, thank you. There were no instructions with my box, so this video saved me a lot of time.
Great video! No assembly instructions came in box. Was able to successfully and easily assemble after watching this video with no assistance.
Thanks for watching and enjoy the deck box!
Great video, the box did not come with assembly instructions, you saved me!!!! Thank you
Glad to help! Thank you for watching I really appreciate it!
mine arrived without the assembly instructions, i was so happy to find your helpful video - thanks!
I've heard this dozens of times!! No instructions! That's terrible packaging by the company. Glad my video helped. Enjoy the deck box!
I ordered this box based on your recommendation and your excellent instructions will help me put it together …Thank you!
Thank God for your Video. Mine did not come with the instructions but from the reviews even if they had apparently they were hard to Follow. So your video was a lifesaver thanks so much
I've had dozens of comments that this deck box had no instructions! It's amazing they wouldn't pack the all important instructions and even the typical hazards and troubleshooting as well. Glad to have helped! Thank you for watching and if you subscribed thank you as well!
Awesome video! It only took me a couple minutes longer to assemble my box than it did to watch your video thanks to your awesome and well presented steps. I was one of many folks that didn't get any instructions (or even stickers on my box!!!) and you helped me immensely. Instant subscription and like here. Keter should be paying you for every view you get!
Yes they should
Bless you for taking the time to make this video. I was able to assemble 2 boxes in the dark while it drizzled in about 30 minutes. Much appreciated!
Glad to help it's what my channel is all about! Thank you for watching and if you subscribed thank you as well.
This was not a easy assembly until I found your video. The instructions included were useless. I had to basically hammer the rods through then it was a piece of cake. Thanks, you get a thumbs u[p and a follow
Glad it helped!! Thanks for watching and subscribing!
Good instructional video. My box didn't come with instructions and your video was extremely helpful. Thanks!
Thank you so much. Your vid was a life saver. Mine came without instructions and the one the company provided was only partial. I saw a few vids on the assembly but yours was the quickest and easiest. Thumbs up!
I've heard they don't come with instructions, glad to help! Enjoy!
I started pushing the rods. Then I flipped it with the rod-end on patio/ground and slid the FDB downward. They went on much easier.
👍🏻👍🏻excellent, clearly explained at the right pace. ☕️
Thanks for the assist! I have the 150 Gallon Box and it was a breeze!
Thank you for the easy to follow instructions. This is my first time building some thing of this magnitude by myself with no help and without your video I would’ve been totally lost. I didn’t even need an extra set of hands.
Thank you for watching and enjoy the deck box!
Did you assemble it yourself? Difficult?
I’ve learned to find an assemble video on you tube before I even start a project. Just subscribed to your channel!!
Thank you!
Very helpful video you made thanks I would of been stuck overthinking the laches.
Hey everyone welcome to another video from our Ultimate Outdoors Playlist. We normally upload tech related videos but once in awhile we like to do something a little different. We hope you enjoy! Thanks for watching!
Have you guys much feedback on water resistance? I’m putting one together and think I might through some waterproofing into it.
I’m thinking a couple of tubes of silicone caulk, or a roll of butyl tape…and some rubber gasket for the lid. Anyone have any suggestions?
Great video, Thank you for your detailed instructions!
Thank you so much for this vid! 👍🏼🙌🏼💪🏼
Great video. A bit of soapy water did the trick for the sticking bars.
So glad you made this video! Mine did not come with instructions. It would have taken me hours to figure out how it all goes together. Thanks brother!
Putting this together now. Just want to say if you wipe the metal bar with mineral oil, the insertion is easy breezy.
absolutely perfect instructs for this assembly. thanks!!
Glad it helped and thank you for watching.
I just put together 5 of these boxes. It took me 35 minutes per box. Easy assembly. I did this by myself.
Nice!! Thanks for watching!
Very helpful, thank you! Our box arrived minus instructions so your video proved invaluable!
Mines arrived without instructions too
Great video. Anytime I can complete “assembly required” in under an hour is a miracle!
Thank you for watching!
Thanks a million for this very helpful video! We had it put together in no time with your help.
Your welcome and thank you for watching I really appreciate it.
Dude thank you 🙏🏼 your vid saved me time & the tips about the rods awesome 👏 it’s a great box not low quality at all! 🙏🏼
Awesome glad to help! Thank you for watching and if you subscribed thank you as well!!
First let me tell you I'm a 62 yr old with arthritis. 2nd my box arrived with no instructions. 3rd your video made this task so simple. It was easy. I needed a small hammer to tap the rods in but it was a breeze. Thank you for your help.
Glad to help!! Enjoy the deck box its pretty durable. Thank you for watching!
I suspect these boxes are made in China, so keep your expectations low, just saying
Great video. I used it to assemble my deck box and it was much better help than the supplied directions. Thanks for posting.
Im glad my video helped! Thank you for watching and enjoy the deck box!
i love your dad shoes! 👍 thanks for the video
Thanks for watching!
Great video! I just ordered my box and waiting! Hopefully as easy to assemble.. Will update!
Very informative video much better than instructions. Only missed MG x1 in the assembly
EXCELLENT VIDEO. THANKS.
This video helped a lot. Thanks man!!!!
Glad it helped!
very helpful... Thank You
Great video. Thank you! I have 2 screws left. I don’t see anywhere they would go. Are there extra, lol
Probably extra! I Hope! 😮
This video was sooooo helpful thank you
Your welcome and thank you for watching and for commenting!
@@UltimateTechHub lol you would have been proud of me 😂😂😂 put it together in 20 minutes or so!
Good video! I just picked up this box from Sams club for $99.99.
Enjoy!!
It was $30 off at Sam's- because it was a return. No instructions and some extra parts (!?!). My wife and i were trying to put it together sans instructions and I found your video in time to save our marriage! Thanks so much for documenting this!
Lol
Thanks for this video I did it by myself!!
Great job on the video.👍👍
Definitely used this video to assemble my deck box. Got mine at Sam's on sale for 100$!
Amazing.. thank you for sharing.. just what I was looking for.
Best video on this product. Just one question, is it water proof and sealed enough to prevent dust/water etc to sneak in when in the outdoors? Thanks!
Yes absolutely, I keep all of my pool chemicals, pool supplies and yard tools inside and no water or dust or dirt. Thank you for watching and for the kind comments.
@@UltimateTechHub Alright clicks on your link and buys. btw - amazing it's made in Israel. Thanks a lot!
Super helpful. Thank you!
Your welcome and thanks for watching!
Very helpful video but mine has a third smaller metal rod. I figured it out. It's installed on the front of the lid before adding the lock latch.
It might be a different model box. I bought mine almost 2 years ago and sometimes they make changes to product designs. Thank you for watching.
Thank you!!!
Great video. Do you know what kind of lock or how to lock these deck boxes?
Thanks for the video! I ordered mine from Target and the instructions were not included 😢
Your not the first one to get a Deck Box with no instructions! Seems to be the norm! Lol
How does it perform as far as water resistance? I plan on keeping charcoal and smoking wood in it.
It's water tight. I keep pool chemicals and pool supplies in it and no rain or debri get inside. Thank you for watching.
I am trying to find a storage solution for some of my power tools. I live in a small house, and I've amassed a large collection of tools that just can not fit in my walk-in closet any longer.
My issue is I rent, and I don't want to build a shed, and I'm afraid that these storage boxes would leave my tools susceptible to corrosion. It's better than just covering with a tarp, but still. Looking for suggestions?
My big question for you in 2024.... Has it been truly waterproof (contents inside stay dry) and weather resistant?
Absolutely waterproof!
Thanks for the video❤. Will the hydraulic latch work once it's installed. Because when I open the latch to install, I don't know how to close it😢😅 thanks
It will work once it's installed.
@@UltimateTechHub thanks a lot
Would putting a light coating of oil on the metal pieces help it to slide easier? I just bought 2 of these and will put them together this weekend.
It might help but mine still works great and no issues and no oil.
My 150 gallon box lid warped and cracked before it was 2 years old. This let rain and squirrels in.
Mine is still holding strong under the Las Vegas sun. Sorry to hear about your box lid.
I agree with James Holt that the instructions were almost useless. I’ve been seeing instructions like this, more and more, that are devoid of any text. Many times the pictographs do not always helpful.
At first, I thought this video was missing a step. In this box a metal support for the lid ‘slides’ in. On mine, the metal support is screwed in. I don’t it matters.
This is a huge box. Funny that at Sam’s Club it’s about $75.00 cheaper that online price at Wal-Mart. 😮
hello, i have the same box. i'm moving now and i need to disassemble it for storage. it doesn't look like it will and there is no tabs to press to unsnap the sides. could you check it out and see if you could disassemble it?
looks like you are going to have to buy a new one from Costco for 150 bucks
OK I made a stupid mistake and need help. I snapped the 2 short side pieces into the back piece before sliding in the metal bar. I can't get them to unattach. I've tried a screwdriver and crowbar but afraid of breaking the plastic. Any suggestions?
The air monarchs give credibility to this video.
But, try and disassemble if you went out of sequence you can’t take it apart
Ok I was able to squeeze it in it is all together now and I like what I see it looks good too 👍
How does this thing do in the rain?..not sure if it has waterproofing
Holds up well. We don't get a lot of rain but when it does rain it's completely water proof.
Is there a way to disassemble this without destroying it?
You can take it apart but it may loosen the connections. Sorry.
I also have 2 similar boxes for outside, on the terrace. The are great. Good luck with the channel.
Thanks for watching and thank you for the nice comment!
Hey do you think a gas weed eater will fit in this box ?
Yes probably.
Very good and helpful but you did not show putting in the barr into the lid. 😉 Thanks
It kind of looks more gray than brown. Would you say it’s true brown?
It's definitely brown but it's more like a medium brown. And it still looks great after 1 year of the sun beating down on it.
With all of those ridges from the exposed structural grid pattern on the inside will make it very hard to clean and hard to keep dry so mold and milder will grow inside it. Still on the lookout for an outdoor storage container with a smooth easy to clean interior. Let me know if anyone knows of anything please and thank you
Is it possible to unassemble, once assembled wrong?
I think so with just a little force it should come apart.
Is it mouse-proof?
So far!!!
Thanks a bunch! Saved me a load of aggro!
Glad to help. The metal bars are the biggest pain. Thanks for watching!
Thanks i just bought it.
My deck box arrived with the lid warped(bowed) and scratched in several places😩
Ugh. Return it immediately.
Is it water proof ?
Yes, when it rains the inside is bone dry.
I forgot to put in the steel rods at the beginning. Any way to disassemble the unit so I can put them in?
I believe you can unsnap the panels. Just take your time. I almost did the same thing. Keep me posted and thanks for watching.
I have the 110g storage box but I cannot work out where the metal openings attach. The image in the instructions is not clear, and you cannot see on video.
Hj there can you please help me as j need to dismantle this box how do I take the short ends off please.
Ever never dismantled them before but I'm guessing they just unsnap.
I can’t get the rods in for the life of me. It’s been an hour of struggling. Think I have to return it.
Just insert the rods on the RIGHT side to go LEFT and push thru. Those bottom feet are numbered as well. Not done assembling mine as it's dark outside now.
Thanks for watching and enjoy the deck box! Ours is still holding up well after 16 months!
My box came without instructions. I followed your video up until you installed the lock latch. I don’t know which one that is. Neither pieces I have look like it’s right.
It may be a different latch system. Seems like these boxes don't come with install instructions. Thanks for watching.
R05 is giving me trouble!
I need to dismantle my box. How can I do it safely
I have never dismantled that box. I assume it can unsnap but I don't know for sure. Just take your time. Good luck and let me know f it can be dismantled so I can add it to the description.
I just can’t get the metal rod threaded back in ... how did he do it so easily?? I’ve been struggling all afternoon.
That's the hardest part of the assembly. Use gloves and maybe a hammer to gently hammer it into the groove. Keep me posted and thanks for watching.
@@UltimateTechHub I tried using the floor to help me force it back in, but the plastic then just started to crack. So I’ll be taking this back. What a waste of 2 hours.
In the midst of assembly and came across an issue in Step 5. In Step 2 the schematic clearly shows that the metal reinforcing beams insert with the open side of the channel to the outside of the box. In Step 4 the schematic depicts the closed side of the beam towards the inside. However when you get to Step 5 where the 2nd long side wall is snapped into place on the short side wall the drawing depicts the beam with the open side towards the inside of the box. Since disassembly is not possible or very difficult I stopped there. You FF’d through that step but on review it appears the open side is to the outside of the box on both sides of the box. Hope that is correct.
The metal beams where difficult to insert that's for sure. And I think the schematic may have been printed incorrectly because the way I assembled it worked perfect. I've had no issues with it and works exactly the way its supposed to. Hope this helps clear your mind of any worries. Thanks for watching.
@@UltimateTechHub is there any way to DISASSEMBLE this box??
@@locasciogina I'm sure it's possible to unsnap the plastic pieces.
Thank you for the review, however the most important information for me is missing. What is the internal dimensions for the deck box? All the other dimensions are clearly presented all the places around, including your review. But internal are missing and I could not find it unfortunately. I would appreciate if you could share this information with us.
54 length, 24 wide, 23 deep
@@UltimateTechHub Thank you for the prompt reply.It's really helpful!
Going to store my eco power lawnmower in this box. Folds up to about 35Lx 21.5Wx18depth thanks for dimensions
Thank you for this, helped me assemble this box since no instructions 🤣. Great box
Seems like these boxes don't come with instructions because I've had dozens of comments about no instructions! Lol.
Thank you for watching and enjoy the deck box!
The hardest part for me was getting the screws to screw in straight. One section of a side was cracked when I received it. Too much of an ordeal to replace.
Is it insect proof? To keep insects out of the box?
Its sealed pretty good. I have had no bugs in the box. Thanks for watching!
I’m currently waiting for a reply from someone at customer service my deck box came cracked and the bottom piece is broken and since I already installed the sides I can’t get them apart to return the item. I’m livid
Sorry to hear that. I hope they get you a brand new one. Keep me posted.
@@UltimateTechHubthanks I’ll keep you posted i’m hoping they get me a replacement as well!
@@UltimateTechHub They got me a new box but I have to take this one apart to ship it back to them any ideas how to disconnect the side panels. I tried a crow bar to gently pry it open, screwdriver and a paint scraper lol no luck so far.
Thanks, mines didn't come with instructions lol
Ive heard that many times before. Glad to help.
Just bought one got a smoking deal I think 150 bucks
That's a great deal!! We love ours!! Thanks for watching!
i skipped a step and put the other side piece on before installing the bottom piece. how to pull off one of the side pieces?
I did the same. 😩. Anyone got a solution that hopefully won’t damage the box?
Same 🤪
@@mandaa5279 we left it out in the sun for a little and it softened it enough to pull it apart :)
I was able to bend the bottom piece to snap in. You will need a helper for this
I took the caps off the end was able to use a screwdriver to chisel the inside piece that snaps together enough where I could get them to pry apart with a use of a flathead screwdriver. I did it very carefully and by myself and didn't damage it. I was able to put it back together with no problems.
I see that you opted to NOT get inside the box when putting the fastening screws in.
Yep no need