HDzero is my dream Hd system but as someone who is very poor and live on a very fixed income i could never afford it. Thank you for sharing your thoughts and time with us, i really appreciate it. God bless you and your family and America 🇺🇸
3M double sided works great. I mounted a different heavy VTX underneath my 4" Apex because I didn't have room to mount it properly. It worked fine. I had zip ties as a redundancy back up but they were just for looks more than anything else. Thank you for sharing Nick!
They are supposed to ship soon I hope, still on pre-order everywhere. Maybe there was another heat sink screw issue? Time will tell. Was going to put it in Grinderino # 2 build. Good point with the 03 cable pinout, that will get someone for sure. Cheers Nick...till the next one!
I think so, but I don't have confirmation. I think the holiday they have been on just ended so we hopefully will see stock arriving in the next week or two.
Was hoping you'd take a look at the new stack. some good points, There's a few 3" quads on my shelf that will eventually get one of these I'm sure. Thanks for the video! Cheers!
So Nick when i do get th3 freestyle kit when it comes to goggles i have a pair of fatshark scouts already, would i be able to just find the channel that the stock ones are on and match it or is there some technical magic that needs to happen to get them binded up, Thanks.
no binding with hdzero, it all about matching the channel frequency on the goggles. Firmware matching can improve performance or camera compatibility with different camera modes, like 540p and 90fps.
@@NickBurnsFPV no .. the wiring diagram is was using on the FC side of things had it wrong... Perfectly matched the freestyle V2 pin out though ... I was wondering why my vtx wasn't receiving power on n plugging in battery... Quick multimeter test revealed the correct live pin!.. NeutronRC F435 mini wiring diagram is no correct in the hd Fpv plug!
Nick, I was wondering if this would work inside of an RC car or truck? Do you think there would be an overheating problem unless you mounted a little fan to it like they put on ESCs and motors? TIA John C
I really would like to get a setup with HDZero but i'm so deep in with DJI. If DJI would make a single board for whoop that would be a win. only in our dreams lol. Good review sir
HDzero is my dream Hd system but as someone who is very poor and live on a very fixed income i could never afford it. Thank you for sharing your thoughts and time with us, i really appreciate it. God bless you and your family and America 🇺🇸
Had my fingers crossed Hdzero would make this form factor for years.....
Started a new 3 inch build as soon as it was released.
Great news
3M double sided works great. I mounted a different heavy VTX underneath my 4" Apex because I didn't have room to mount it properly.
It worked fine. I had zip ties as a redundancy back up but they were just for looks more than anything else.
Thank you for sharing Nick!
Doesn't affect cooling at all?
@@elxero2189 Not that I noticed.
Most FCs with DJI Plug have the Vista Pinout, there the provided cable is a plug and play, which is awesome.
Wasn't it O3 that swapped the pins initially, relative to vista? How manufacturers are expected to choose pins order in such a mess? )
Awesome overview, Nick! Thanks! 😃
Absolutely agree about the wire!
Stay safe there with your family! 🖖😊
I wish they make tinier 200-400mw vtx’s for our micros. Something closer to eachine nano vtx or rush tank nano.
Yeah definitely! I’m on analog for this very reason. Hdzero is nice and all but the range is awfull.
I suspect it would require new asics/chips which may or may not be able to be developed.
They are supposed to ship soon I hope, still on pre-order everywhere. Maybe there was another heat sink screw issue? Time will tell. Was going to put it in Grinderino # 2 build. Good point with the 03 cable pinout, that will get someone for sure. Cheers Nick...till the next one!
I think so, but I don't have confirmation. I think the holiday they have been on just ended so we hopefully will see stock arriving in the next week or two.
Was hoping you'd take a look at the new stack. some good points, There's a few 3" quads on my shelf that will eventually get one of these I'm sure. Thanks for the video! Cheers!
Thanks for this review. Does this camera/VTX work with EMAX Transporter 2 HD monitor or frsky skyvision hd monitor?
all hdzero goggles, screens, receivers are compatible with all hdzero vtx and cameras.
So Nick when i do get th3 freestyle kit when it comes to goggles i have a pair of fatshark scouts already, would i be able to just find the channel that the stock ones are on and match it or is there some technical magic that needs to happen to get them binded up, Thanks.
no binding with hdzero, it all about matching the channel frequency on the goggles. Firmware matching can improve performance or camera compatibility with different camera modes, like 540p and 90fps.
I really do wonder how much adoption the 03 has thats a rather expensive unit man
I haven't seen any numbers on it. I do wonder the same.
The pin out on the wiring harness seems to match 03 pin outs now.
That’s a good move and information update. Thank you
@@NickBurnsFPV no .. the wiring diagram is was using on the FC side of things had it wrong... Perfectly matched the freestyle V2 pin out though ... I was wondering why my vtx wasn't receiving power on n plugging in battery... Quick multimeter test revealed the correct live pin!.. NeutronRC F435 mini wiring diagram is no correct in the hd Fpv plug!
Nick, I was wondering if this would work inside of an RC car or truck?
Do you think there would be an overheating problem unless you mounted a little fan to it like they put on ESCs and motors?
TIA John C
I'm not Nick but I don't see any reason why your idea wouldn't work. You'll need that fan you were talking about though.
Does it fit whoops ??
If you want to change power output, do forget to tie or untie the screws!!!
If an o3 can be on a whoop frame this can as well. At over 31 grams I don't think its a good whoop option, hdzero has the whoop lite vtx
I really would like to get a setup with HDZero but i'm so deep in with DJI. If DJI would make a single board for whoop that would be a win. only in our dreams lol. Good review sir
Yea I don’t think dji is interested in going that small but we can still hope 🤞. Maybe one day
Hopefully walksnail will do this with the bigger vtx.
Doesn't the pinout just depend on, if the connector is mounted to the top or bottom of the FC. It would flip.
No, with + and - being on opposite sides they are always on the opposite side regardless of the receiving connector orientation.
You're a beacon of positivity! 🌟 - "The only place where success comes before work is in the dictionary."
Hello!