That will be absurdly easy. Just weld a strong hoop onto the passenger side bed side. Drop the side, and have Tucker stand on the hoop,and hold onto the headache rack!
Soon As Snow Melts Off the Rubicon Trail Bring it Here We can Assist you in the Getting Thru the Trail as far as you can Make it. Keep up the Fun Guys its Fun To watch your Shenanigans !
I think i'd add some outriggers to keep the truck from tilting when using the crane. You could probably use some camper lift jacks, or just some tubes that slide inside each other that can rotate up out of the way when not needed
It’s amazing ! Been looking at FabRats issues with their roll back and wishing they would look at this. That being said, with the magic of video, I don’t even know if your two projects are concurrent, or if the engineering can scaled up. But either way well done Rudy and team ❤
I have suggested to Matt for year (s) an off road rollback. Say F-350 crew, longbed, SRW. Convert to reg cab, put 14’ *or longer* rollback deck over 6 wheel drive. There was? A kit for adding a 2nd rear drive axle. With Matt’s crew ability. It should be easy. Make it to recover side by sides, and most Jeeps, SUV, vans damaged off road. Heck both rear axle steer if he wants.
You should drill a pilot hole with a smaller diameter drill bit, like a 3/16” then step up to a larger bit. You might want to get Rudy to weld a brace from the upper portion of the crane across to the lower left side of the headache rack. Your extendable boom should also be marked for maximum acceptable load at each extension point.
You guys are the modern day Three Musketeers... that looks like a really fun vehicle with a little more Work. I watched Rudy and Zack working on your Rig. He is a Very Talented Guy for sure.. Trevor, I met you with The Moor Crew in Pigeon Forge a few years ago.. Jeep Invasion there Is enormous.. You fellows be careful out there ... MWP Cosby Tn.
It was good to see George in this video. I can totally feel his pain on the Several hundred dollar bits only to have the 12 dollar ones get the job done! lol
Hi I have been watching your new show you really do a great job I will always praying 🙏 for you 🙏 so you will be safe ok 🙏 and please be careful out there ok 🙏 you have a wonderful day and have a good night and day ok love Lorilee xoxoxoxox 🙏
On my mini truck I added sumo springs to the back, they are urethane bump stop.. They are awesome and if installed right they dont stiffen up the ride like adding an extra leaf will do. I can carry 2000 lbs in there with no problems. Keep up the good work.
Hi Trevor , just subscribed a few days go after learning what happened to you. Looks like your investigating hair replacement worked for you HappyTimes You must have the cleanest workshop in the industry. Best of luck in your new adventure, Cliff Please Stay Healthy
Ya might consider a jack leg, ( like the stabilizer or out rigger on large tow trucks ). that will fit on either side of the truck so when your deploying the hoist you can support the bed.
That thing begs for new BIG wheels, maybe new axles to support..... A friend grew up on military bases in Japan, his misspent teens included stealing those and the little mini coupes. Drunkenly crashed one into a wall, met the base commander and a few things one time. I know they have some fun in 'em.
You say you want to know what color to paint the Bumper. You need to come up with A color that represents your channel. If it's OD green then you need to paint it OD green in the front, back and the side panels. I think OD Green would be great.. Good luck and God Bless
Nice rig, Be careful you guys, Especially Tucker, He's probably half to be the counter weight for that crane in the field, Off camber slopes is see in your future. ❤🎉
Hair is looking gloooorious!
Right. That stuff is actually working!
Came to say this
Outriggers would be a safety item to keep you from tipping the truck over! All the big boys have them!!
That will be absurdly easy. Just weld a strong hoop onto the passenger side bed side.
Drop the side, and have Tucker stand on the hoop,and hold onto the headache rack!
World's smallest off road rotator rollback
An extended RV stabilizer jack on the should do the job
Dang! Y’all’s hair is looking GREAT!
When drilling thicker plate make a pilot hole first it’ll save your bit, time, and energy. Really enjoyed the content keep it up!
Also, anything over a 6mm (1/4") has to be run on speed 1 on a hand drill.
I spent years burning out 10mm drill bits before I realised.
This 👆
And maybe upgrade from a harbor freight drill to something with a chuck that works, haha
You guys should get Rudy to build you an outrigger for stability when picking with the crane
Are airbags another option since you're beefing up electrical? 👽🗿👽
Really need a full sized truck. 😉
The Hair still throws me off. Years of watching Bald guys. Looking great , and i love the channel.
Every time Trevor talks, all I hear is!🙇🏻♂️ hair we go!!!
I haven't seen Tucker in a long while ! Wonder where you went. You're on Rudy's channel now. Awesome.😊
When I grow up I want to be a kid
You guys are having so much fun.
Rudy knocked it out of the park! Now you need portals, 4-link, 31" tires on a Samurai axle. Oh, and a pint sized super charger.
Use the AMR500
Dear Trevor,
Thank you for handing him the cutting oil. You are a god send and the hero of all man kind.
Slow down the drill when you’re drilling steel. The high speed will over heat the bit and destroy the temper. That softens the edge and ruins the bit.
This.. low rpm and steady pressure for drilling steel.
I’m voting, paint the bumper black.
Gotta hand it to you guys. You know how to pick a top notch fabricator. Nice work Rudy.
👍🏼👍🏼
Strongest guy in the crew is slinging the camera when it comes time to shoving things around the shop! HaHa
Whole project... Grabber green and hotrod purple...
Your hair is gonna look amazing at month 12 if it's growing this well at 4!
Someone needs to tell Paul from fabrats to look into that design for his rollback project then he could have his cake and eat it too
Look at all that hair!!! ❤❤❤
Soon As Snow Melts Off the Rubicon Trail Bring it Here We can Assist you in the Getting Thru the Trail as far as you can Make it. Keep up the Fun Guys its Fun To watch your Shenanigans !
That's so cute!
You need a retractable stabilizing leg for when you use the mini crane (for no tippy over).
How have I missed this channel existed 😮😮😮
Glad you found us!
DEADLY DAIHATSU Savage build
You could weld on some pockets in the front and rear bumpers to slide in manual out riggers to help with the hoist.
Recommend battery mounting on the opposite side of the crain
Trevor trying to talk at times, makes me giggle.
Holy crap. I was wondering where you went!!! Missed ya on MORR
I think i'd add some outriggers to keep the truck from tilting when using the crane. You could probably use some camper lift jacks, or just some tubes that slide inside each other that can rotate up out of the way when not needed
Yeah, prolly need some outriggers on that mini wrecker. Cool truck though.
Love the channel, real class and the transplanting looks like it took off! Cheers!
The hair transplants are really looking good!
I love that little truck! It is going to be awesome to see it put to work. I wonder how many Groms it can hold?
I’d add a little outrigger, then you’ll have a mini rotator wrecker!!!
Very nice. I think you should paint the new diamond plate bed with some bed liner.
PURPLE PAINT IT PURPLE
Yay, another misadventure adventure
Adding locks to the bed will help address the twisting when using the crane. Fun build!
Good idea
that is awesome put a jack stand under before using the boom great video
It’s amazing ! Been looking at FabRats issues with their roll back and wishing they would look at this. That being said, with the magic of video, I don’t even know if your two projects are concurrent, or if the engineering can scaled up. But either way well done Rudy and team ❤
good to see ya trevor, from gta lol
I have suggested to Matt for year (s) an off road rollback. Say F-350 crew, longbed, SRW. Convert to reg cab, put 14’ *or longer* rollback deck over 6 wheel drive. There was? A kit for adding a 2nd rear drive axle. With Matt’s crew ability. It should be easy. Make it to recover side by sides, and most Jeeps, SUV, vans damaged off road. Heck both rear axle steer if he wants.
Needs a mini outrigger now 😁
You know why I'm here. 4:29 for my RUUUUDY fix.
You should drill a pilot hole with a smaller diameter drill bit, like a 3/16” then step up to a larger bit. You might want to get Rudy to weld a brace from the upper portion of the crane across to the lower left side of the headache rack. Your extendable boom should also be marked for maximum acceptable load at each extension point.
❤ to see the 30-45min vids can’t wait to see the micro roll back out at Moab or Rubicon Trail ☺️😉
You guys are the modern day Three Musketeers... that looks like a really
fun vehicle with a little more Work. I watched Rudy and Zack working
on your Rig. He is a Very Talented Guy for sure.. Trevor, I met you with
The Moor Crew in Pigeon Forge a few years ago.. Jeep Invasion there
Is enormous.. You fellows be careful out there ...
MWP Cosby Tn.
You guys are like gazillionaires. Break your jeep and call in the spare jeep.. lol.. thanks for sharing.
Rudy did awesome on that truck. In Robby's defense, those bits will last forever... sitting in the toolbox, never being used. Jk 😅
Love your guys vibes does you all do good together it wouldn't be what it is without any one of you 3you guys are so funnny
Nice moss
Looking good..nice seeing you guys again...Rudy to the rescue
It was good to see George in this video. I can totally feel his pain on the Several hundred dollar bits only to have the 12 dollar ones get the job done! lol
That is cool as! Can’t wait to see the misadventures ahead
Gotta love those cordless drills and their auto releasing of the bit when the trigger is released!
😆
Those stepper bits are awesome, never have a problem drilling anything with mine
Georges head said your going bald no matter what. Hair up front bald in the back now.😂😂
Trevor, I totally get the "R-W Dyslexia"
love this trio, love this channel.
Please restock misadventure tees.
Hi I have been watching your new show you really do a great job I will always praying 🙏 for you 🙏 so you will be safe ok 🙏 and please be careful out there ok 🙏 you have a wonderful day and have a good night and day ok love Lorilee xoxoxoxox 🙏
That looks like a fun rig now
On my mini truck I added sumo springs to the back, they are urethane bump stop.. They are awesome and if installed right they dont stiffen up the ride like adding an extra leaf will do. I can carry 2000 lbs in there with no problems. Keep up the good work.
Oh sweet, thanks for the tip
Carry a set of jack stands with a flat bottom welded on them
If you don't want your bits to fall out of your drill, tighten it all the way, then loosen it ONE click.
Hi Trevor , just subscribed a few days go after learning what happened to you. Looks like your investigating hair replacement worked for you HappyTimes You must have the cleanest workshop in the industry. Best of luck in your new adventure, Cliff Please Stay Healthy
7:45 drill a pilot hole and time the difference and examine for wear and damage after.
That shot of Trevor at 2:50 is scary.
Glad to see you confident with hair
This is a wonderful project!
Hair is coming in good!
Ya might consider a jack leg, ( like the stabilizer or out rigger on large tow trucks ). that will fit on either side of the truck so when your deploying the hoist you can support the bed.
Pretty sweet ride Trevor!!
That thing begs for new BIG wheels, maybe new axles to support..... A friend grew up on military bases in Japan, his misspent teens included stealing those and the little mini coupes. Drunkenly crashed one into a wall, met the base commander and a few things one time. I know they have some fun in 'em.
The mini rollback is looking good ! 👍
Hair is looking great guys. I love your Channel
It's awesome!! And Trevor... it seriously looks like you have more hair!!!
Correct the winch from the rollback to jeep connection pulling angle.
Trevor, your hair is looking good!
🙋🏼♂️ fuzzy Trever 🧔🏻♂️
👍🏽👍🏽
George, "Twelve bucks!" LOL!
The hair is growing in nicely
What a wonderful wideo. Good wook.
Can’t wait to see that bad boy put to work. Great job
Need some outrigger for when using the crane to stabilize it better
So Trevor's hair transplant worked pretty well! Looking sharp, boss.
You say you want to know what color to paint the Bumper. You need to come up with A color that represents your channel. If it's OD green then you need to paint it OD green in the front, back and the side panels. I think OD Green would be great..
Good luck and God Bless
Start of with a smaller bit
The Rollback is coming on nicely, Jon UK
Entertaining as always 👍
If the crane is staying orange, then maybe orange bumpers?
Nice rig,
Be careful you guys,
Especially Tucker,
He's probably half to be the counter weight for that crane in the field,
Off camber slopes is see in your future. ❤🎉
Way to go Rudy!
Great video guys!! The hair is coming in beautifully on George and Trevor.
Thanks!
Enhorabuena! Os está volviendo a crecer el cabello. 😁😉
Try drilling a small pilot hole first, then up sizing the drill bits.....
Looks like the mini rollback isn’t the only thing back…nice hair! 🤙🏼
Looks good and just needs a touch of finishing work. Works GREAT though
You should add onboard air. Air down to Offroad, but air up if you are going to winch up heavy loads.
100% had no faith in the boom!!! Way to to Rudy.
1st drill a piolet hole that ell put that there drille bit right true dat metal