Thank you Olivio for everything you do. Everything you do we can do at home for free. You don't promote websites that we have to pay to use an API. You also don't hide anything behind a patreon only paywall... Thank you so much!
I ran into the same issue with missing nodes even after installation. Manually replacing the modules fixed it for me! Saved me hours of troubleshooting
After installing the missing stuff on comfyui manager, I am getting this error: When loading the graph, the following node types were not found: [ComfyUI-3D] Load Pose Guider [ComfyUI-3D] Load UNet2D ConditionModel [ComfyUI-3D] Load UNet3D ConditionModel [ComfyUI-3D] Pose Guider Encode [ComfyUI-3D] Animate Anyone Sampler Nodes that have failed to load will show as red on the graph.
dude, this random suggestion on the issue solved it for me.... ""I solved my problem, i go to the folder: " F:\ComfyUI_windows_portable\python_embeded\Lib\site-packages" and i DELETE the 2 folders with the name "diffusers" then i go to the manager and i re-install the script, now works!"" basically delete the files, restart comfy, unninstal animateanyone, restart, install from manager, paste downloaded models, restart, works!!!!
@@psaicon0 Tried this. Didn't work. Deleted 'diffusers' and 'diffusers-0.24.0.dist-info' / Restarted / uninstalled AnimateAnyone / Restarted/ Installed Animate Anyone via Manager / Pasted over the files (pre-trained weights and unet) / Restarted / ....same 3-D issue. This comment by @deviltiger78 below fixed it for me: "What worked for me was navigating to the ComfyUI_windows_portable\python_embeded folder then opening a command prompt in that folder and running python.exe -m pip install --upgrade diffusers==0.25.1"
from a comment down below this is what worked for me: What worked for me was navigating to the ComfyUI_windows_portable\python_embeded folder then opening a command prompt in that folder and running python.exe -m pip install --upgrade diffusers==0.25.1
Can't get past missing nodes, Yes I have installed the ComfyUI-3D pack, put the UI claims that Animate Anyone Sampler, Load UNet2D ConditionModel Load UNet3D ConditionModel Pose Guider Encoder Load Pose Guider are NOT found. I have re-started yes. Any advice?
Had the same error and many comments on this video observe this. After research I found a place where it was suggested to simply search for the nodes in the UI/in the workflow and delete the red ones. A reload (double click on the UI and search for the respective nodes) does the trick. I watched Olivios video in detail where he shows/explains the nodes which were red in my UI and just reloaded/inserted them freshly and deleted the old. This worked for me! No need to search for the nodes in the manager or even manually install them!
@@sauronsauronsauronsauron8891 Hi, I tried this, double clicking in the UI and searching for the name of the Nodes, but nothing is coming up. How did you do this?
@@IntiArtDesigns You have to rebuild part of the workflow to get it to work. I got it to work but I'm not sure if its worth the trouble, my results are kinda bad, everything melts together
Had the same error and many comments on this video observe this. After research I found a place where it was suggested to simply search for the nodes in the UI/in the workflow and delete the red ones. A reload (double click on the UI and search for the respective nodes) does the trick. I watched Olivios video in detail where he shows/explains the nodes which were red in my UI and just reloaded/inserted them freshly and deleted the old. This worked for me! No need to search for the nodes in the manager or even manually install them!
Had the same error and many comments on this video observe this. After research I found a place where it was suggested to simply search for the nodes in the UI/in the workflow and delete the red ones. A reload (double click on the UI and search for the respective nodes) does the trick. I watched Olivios video in detail where he shows/explains the nodes which were red in my UI and just reloaded/inserted them freshly and deleted the old. This worked for me! No need to search for the nodes in the manager or even manually install them!
I know it is a lot of work making these videos. I would love to see one on how to get the efficiency node to work and get rid of all the red boxes. I have painstakingly followed some of your vids to only get red boxes and even after update I can not get them working. Thanks
pip installing without being in an environment could cause a lot of issues down the line. I would always recommend only doing a pip install while you're in your comfyui environment to prevent these potential issues from happening.
Hey this video is not working for many people. Also installing in the base environment breaks previous installs of comfy. Could you please address some of the issues in discord and maybe use virtual environments for future videos like this?
When downloading the missing nodes with the manager and then refreshing, it says that the [ComfyUI-3D] node types are missing. Is there a pack that has all of these nodes? This happened when i reinstalled my comfyUI since it was giving me problems last time
Had the same error and many comments on this video observe this. After research I found a place where it was suggested to simply search for the nodes in the UI/in the workflow and delete the red ones. A reload (double click on the UI and search for the repsective nodes) does the trick. I watched the video where the nodes were showing which were red in my UI and just reloaded them an deleted the old. This worked for me! No need to search for the nodes in the manager or even manually install them!
By the way, the AnimateAnyone-Evolved node breaks your environment if you don't have the exact GPU series as the creator. I would say use chiaojie's nodes instead, or wait for somebody to change the requirements file and remove the extras
Hey thanks for the warning, guess I stay away from this don't want to ruin all the work I put into my environment (again) What are chiaojie's nodes? I get no results on Google :D
@@elowine My bad, it's chaojie/ComfyUI-Moore-AnimateAnyone but these won't work either. You can install them, but without xformers and a correct sdpa implementation in their sampler, it will require 54GB of vram for a 512x768 on AMD.
Didn't he just make an A1111 video before this one? As for comfyui, the spaghetti strings give me anxiety, but I have to admit from everything I've seen it's speed and control after you do manage to configure it is hard to ignore.
A1111 development is currently at a snails pace. There just isn't enough new info to justify more A1111 tuts. All of the new techniques are easier to apply to comfy and that's why it's where the action is.
me sale este error, When loading the graph, the following node types were not found: [ComfyUI-3D] Load UNet2D ConditionModel [ComfyUI-3D] Load UNet3D ConditionModel [ComfyUI-3D] Pose Guider Encode [ComfyUI-3D] Load Pose Guider [ComfyUI-3D] Animate Anyone Sampler Nodes that have failed to load will show as red on the graph.
@@IntiArtDesigns If you create the same nodes (their names are in the red part of the failed nodes) and then connect them properly to the other nodes (as they are currently) and then delete the red nodes (original ones), you can get around it.
I have tested the template and it works perfectly. The contribution is appreciated. It would be great if you could make a 2.0 version of this workflow adding the possibility of including Lora's and, in addition to the CN DWPose, the HED to optimize the videos.
Hey Olivio, i followed all the steps carefully but a couple boxes wont stop beeing red... these are the onse: [ComfyUI-3D] Animate Anyone Sampler [ComfyUI-3D] Load UNet2D ConditionModel [ComfyUI-3D] Load UNet3D ConditionModel [ComfyUI-3D] Pose Guider Encode [ComfyUI-3D] Load Pose Guider how can i fix this?
When loading the graph, the following node types were not found: [ComfyUI-3D] Animate Anyone Sampler [ComfyUI-3D] Load UNet2D ConditionModel [ComfyUI-3D] Load UNet3D ConditionModel [ComfyUI-3D] Pose Guider Encode [ComfyUI-3D] Load Pose Guider Nodes that have failed to load will show as red on the graph. Can someone help me?
@OlivioSarikas Hi there. Everything fine and smooth. I have one minor ... not a problem actualy, just - ... the Video Combine dont show the result in the comfy as a preview... it still save the video to the location, but i cant see the result in the comfy. I have TAESD method on in manager, preview enabled in the node, but still no preview shown. When I switch to another of your workflows, the video combine shows the preview there > switch back to this, run again - still no preview... Would anyone know what am I missing here?
Also when installing multiple custom nodes, you can use the checkboxes on the left hand side, left of the ID column, once you have selected all the nodes you want, hit install on one of them and all of them will install, saving you time having to do it one by one and waiting for it to finish before starting the next install.
It's totally impressive how you've build the workflow to get the best quality with this addon. I really like the switch you've implemented. I think this is a really interesting new technology and with everything build into ComfyUI it's ready to use, everything customizable of course. Great video about great advancements.
same.. Cannot import E:\ai\ComfyUI_windows_portable\ComfyUI\custom_nodes\ComfyUI-3D-Pack module for custom nodes: No module named 'diff_gaussian_rasterization' Cannot import E:\ai\ComfyUI_windows_portable\ComfyUI\custom_nodes\ComfyUI-AnimateAnyone-Evolved module for custom nodes: cannot import name 'PositionNet' from 'diffusers.models.embeddings' (E:\ai\ComfyUI_windows_portable\python_embeded\Lib\site-packages\diffusers\models\embeddings.py) tried installing them manually and it refuses that too because the destinations don't exist
I have a question, its possible to do a 30 seconds video for example? if the densepose duration is 30 seconds? ... I have that problem, i can create only 3seconds videos ..
Double click one the background, type load image, select the load image node, connect it to the image input that I made between the first and second group, load the image
i did everything in the video and when i download the missing custom nodes, restarting ui, there r still red boxes, and when i click on queue prompt, i got a KeyError: "class_type" message on cmd, and an unknown error in the ui
This WF requires Comfy UI 3D custom node which is seriusly problematic to install. It does not work via the node manager and manually I failed (yes, user error, but still...)
Some weights of the model checkpoint were not used when initializing UNet2DConditionModel: ['conv_norm_out.weight, conv_norm_out.bias, conv_out.weight, conv_out.bias'] loaded temporal unet's pretrained weights from /pretrained_weights/stable-diffusion-v1-5/unet ... ^C
Is there any way to use lcm lora with this plugin? It is very demanding ad it can be really slow if someone does not have a really powerful gpu. With a 3070ti it will take ~1 minute or more per frame, and even reducing the amout of steps there is no big gain in time
i get this error-message: "SyntaxError: Unexpected non-whitespace character after JSON at position 4 (line 1 column 5)" - Can anyone help me how to find the position of the syntax error?
Thank you for this! I'm just curious if this works for other things like a skateboard trick (with a skateboard) or a boxer throwing a punch combo, etc?
The file that goes into the clip vision folder when downloaded is a zip file which when unzipped is a folder. Is this normal or does this have something to do with me using a mac?
I tried comfi UI with same prompt minimum nodes no extra close to stable diffusion stable diffusion was lot better in quality n resolution pixel too I just dont know what was the purpose of comfi UI to exist
First install pytorche with cuda (using comfyui python embeded), next update diffusers to ver 0.26.2 (same way), last when open workflow replace old red nodes to new one (same names). Cant isnert command here, yt delete my answer.
I've ignored video previously because it still had a long way to go for what I wanted. This is starting to get close so I think I'll take a look Also, thanks for adding the face detailing and video to pose into the workflow. That's really useful and others have been ignoring it.
can this be used somehow to just render keyframes or in other words the same character in different poses ? i dont need fluid animation, just wanna render keyframes of selfmade openpose keyframes (exported from blender openpose rig). Or does the model rely on previous frames which are close to the new frame ? ?
Wondering if anyone could help me with some info. I use midjourney now, but I would like to do it locally on my own computer. I know we're in the process of this getting better, but I'm mostly interested in consistent characters and video motion added to the images. I'm guessing I use stable diffusion. But do I use ComfyUI? What is A1111? It's all a bit confusing.
Hey guys i'm new I haven't installed comfyui Yet as I am still learning a111 my question is With this set up Could I add a character I drew and make him Dance?
@@OlivioSarikas yeah, moving many items to a separate drive, will copy-paste them back in when needed. went overboard with downloading way too many loras/models early on
world is better when we keep same files as same names. some files allready had and they was diff name but sha same like they are many many many models same files. why make new LOL. reason diff models give same images.... bcoz they same lol
Yep, same here, you'd think updating the diffusers models would fix this, but it doesn't. So i'm stumped. And nobody seems to know how to fix this right now. @@magnushhogberg
Thank you Olivio for everything you do. Everything you do we can do at home for free. You don't promote websites that we have to pay to use an API. You also don't hide anything behind a patreon only paywall... Thank you so much!
I ran into the same issue with missing nodes even after installation. Manually replacing the modules fixed it for me! Saved me hours of troubleshooting
How did you do this? When i go to add node I can´t find the missing ones I need.
After installing the missing stuff on comfyui manager, I am getting this error:
When loading the graph, the following node types were not found:
[ComfyUI-3D] Load Pose Guider
[ComfyUI-3D] Load UNet2D ConditionModel
[ComfyUI-3D] Load UNet3D ConditionModel
[ComfyUI-3D] Pose Guider Encode
[ComfyUI-3D] Animate Anyone Sampler
Nodes that have failed to load will show as red on the graph.
me too =( 5 days and no fix
dude, this random suggestion on the issue solved it for me.... ""I solved my problem, i go to the folder: " F:\ComfyUI_windows_portable\python_embeded\Lib\site-packages" and i DELETE the 2 folders with the name "diffusers" then i go to the manager and i re-install the script, now works!""
basically delete the files, restart comfy, unninstal animateanyone, restart, install from manager, paste downloaded models, restart, works!!!!
@@psaicon0 Tried this. Didn't work. Deleted 'diffusers' and 'diffusers-0.24.0.dist-info' / Restarted / uninstalled AnimateAnyone / Restarted/ Installed Animate Anyone via Manager / Pasted over the files (pre-trained weights and unet) / Restarted / ....same 3-D issue.
This comment by @deviltiger78 below fixed it for me:
"What worked for me was navigating to the ComfyUI_windows_portable\python_embeded folder then opening a command prompt in that folder and running
python.exe -m pip install --upgrade diffusers==0.25.1"
from a comment down below this is what worked for me:
What worked for me was navigating to the ComfyUI_windows_portable\python_embeded folder then opening a command prompt in that folder and running
python.exe -m pip install --upgrade diffusers==0.25.1
@@Kryptonic83 noice. that worked. thanks brotha. 🤙
Can't get past missing nodes, Yes I have installed the ComfyUI-3D pack, put the UI claims that
Animate Anyone Sampler,
Load UNet2D ConditionModel
Load UNet3D ConditionModel
Pose Guider Encoder
Load Pose Guider
are NOT found. I have re-started yes.
Any advice?
I'm having exactly the same issue.
Yes, me too. Searched for these as custom nodes, doesn't exist?
me too.
Had the same error and many comments on this video observe this. After research I found a place where it was suggested to simply search for the nodes in the UI/in the workflow and delete the red ones. A reload (double click on the UI and search for the respective nodes) does the trick. I watched Olivios video in detail where he shows/explains the nodes which were red in my UI and just reloaded/inserted them freshly and deleted the old. This worked for me! No need to search for the nodes in the manager or even manually install them!
@@sauronsauronsauronsauron8891 Hi, I tried this, double clicking in the UI and searching for the name of the Nodes, but nothing is coming up. How did you do this?
please help, manager can't fix it:
When loading the graph, the following node types were not found:
[ComfyUI-3D] Animate Anyone Sampler
[ComfyUI-3D] Load UNet2D ConditionModel
[ComfyUI-3D] Load UNet3D ConditionModel
[ComfyUI-3D] Pose Guider Encode
[ComfyUI-3D] Load Pose Guider
Same problem for me. Anyone have solutions?
Been looking for days, none of the fixes work, barely anybody is addressing this issue either, despite so many having it.@@Thomas_Leo
@@IntiArtDesigns You have to rebuild part of the workflow to get it to work. I got it to work but I'm not sure if its worth the trouble, my results are kinda bad, everything melts together
@@elowine same for me, it is coming as a collage more than a person in given pose that we wanted
Had the same error and many comments on this video observe this. After research I found a place where it was suggested to simply search for the nodes in the UI/in the workflow and delete the red ones. A reload (double click on the UI and search for the respective nodes) does the trick. I watched Olivios video in detail where he shows/explains the nodes which were red in my UI and just reloaded/inserted them freshly and deleted the old. This worked for me! No need to search for the nodes in the manager or even manually install them!
I'm missing Comfyui-3D nodes when starting up the workspace, they don't appear under install missing custom nodes, any ideas?
facing the same issue
Had the same error and many comments on this video observe this. After research I found a place where it was suggested to simply search for the nodes in the UI/in the workflow and delete the red ones. A reload (double click on the UI and search for the respective nodes) does the trick. I watched Olivios video in detail where he shows/explains the nodes which were red in my UI and just reloaded/inserted them freshly and deleted the old. This worked for me! No need to search for the nodes in the manager or even manually install them!
I know it is a lot of work making these videos. I would love to see one on how to get the efficiency node to work and get rid of all the red boxes. I have painstakingly followed some of your vids to only get red boxes and even after update I can not get them working. Thanks
pip installing without being in an environment could cause a lot of issues down the line. I would always recommend only doing a pip install while you're in your comfyui environment to prevent these potential issues from happening.
Hey this video is not working for many people. Also installing in the base environment breaks previous installs of comfy. Could you please address some of the issues in discord and maybe use virtual environments for future videos like this?
When downloading the missing nodes with the manager and then refreshing, it says that the [ComfyUI-3D] node types are missing. Is there a pack that has all of these nodes? This happened when i reinstalled my comfyUI since it was giving me problems last time
Had the same error and many comments on this video observe this. After research I found a place where it was suggested to simply search for the nodes in the UI/in the workflow and delete the red ones. A reload (double click on the UI and search for the repsective nodes) does the trick. I watched the video where the nodes were showing which were red in my UI and just reloaded them an deleted the old. This worked for me! No need to search for the nodes in the manager or even manually install them!
By the way, the AnimateAnyone-Evolved node breaks your environment if you don't have the exact GPU series as the creator. I would say use chiaojie's nodes instead, or wait for somebody to change the requirements file and remove the extras
Hey thanks for the warning, guess I stay away from this don't want to ruin all the work I put into my environment (again) What are chiaojie's nodes? I get no results on Google :D
@@elowine My bad, it's chaojie/ComfyUI-Moore-AnimateAnyone but these won't work either. You can install them, but without xformers and a correct sdpa implementation in their sampler, it will require 54GB of vram for a 512x768 on AMD.
Wish i had known that before completely breaking my ComfyUI trying to install this via this tutorial.
This guy traveled to the ComfyUI side and never went back. No more A1111 tutorials. :(
And soon to be invokeai because it's a comfyUI killer 😂😢😅
Didn't he just make an A1111 video before this one? As for comfyui, the spaghetti strings give me anxiety, but I have to admit from everything I've seen it's speed and control after you do manage to configure it is hard to ignore.
dude, i made a A1111 yesterday ;)
@@OlivioSarikas You really should make tutorials for both. Not everyone wants to learn ComfyUI. Appreciate everything, regardless!
A1111 development is currently at a snails pace. There just isn't enough new info to justify more A1111 tuts. All of the new techniques are easier to apply to comfy and that's why it's where the action is.
me sale este error,
When loading the graph, the following node types were not found:
[ComfyUI-3D] Load UNet2D ConditionModel
[ComfyUI-3D] Load UNet3D ConditionModel
[ComfyUI-3D] Pose Guider Encode
[ComfyUI-3D] Load Pose Guider
[ComfyUI-3D] Animate Anyone Sampler
Nodes that have failed to load will show as red on the graph.
Yes, nobody seems to be addressing this, even though everyone is having this problem. I have not found a fix that works yet.
@@IntiArtDesigns If you create the same nodes (their names are in the red part of the failed nodes) and then connect them properly to the other nodes (as they are currently) and then delete the red nodes (original ones), you can get around it.
@@aaagaming2023 do you have to find the same node or to create a new one. Can you give me / us a more detailed procedure. Be more specific. Thanks
That doesn't work because he can't reset the nodes since they aren't listed in the first place.@@aaagaming2023
@@aaagaming2023 this worked for me
I have tested the template and it works perfectly. The contribution is appreciated. It would be great if you could make a 2.0 version of this workflow adding the possibility of including Lora's and, in addition to the CN DWPose, the HED to optimize the videos.
Hey Olivio, i followed all the steps carefully but a couple boxes wont stop beeing red... these are the onse: [ComfyUI-3D] Animate Anyone Sampler
[ComfyUI-3D] Load UNet2D ConditionModel
[ComfyUI-3D] Load UNet3D ConditionModel
[ComfyUI-3D] Pose Guider Encode
[ComfyUI-3D] Load Pose Guider
how can i fix this?
the same for me... help?
the crazy thing is, how is it working for him? I feel like everyone is geettin this error!@@3DLiveMusic
If you're on an AMD GPU, it seems to be broken, requiring a CUDA/NVidia torch environment.
i7 and nvidia still doesnt work here
@@ricperry1
@@ricperry1 I have Cuda/Nvidia and still have this same problem.
Amazing guide! Thank you!
When loading the graph, the following node types were not found:
[ComfyUI-3D] Animate Anyone Sampler
[ComfyUI-3D] Load UNet2D ConditionModel
[ComfyUI-3D] Load UNet3D ConditionModel
[ComfyUI-3D] Pose Guider Encode
[ComfyUI-3D] Load Pose Guider
Nodes that have failed to load will show as red on the graph.
Can someone help me?
Replace old red nodes with new ones with same names.
Did you get it working?
@@danacarvey I did it. Just delete the red nodes and create them again.
Just look for nodes with the same name and replace.
@OlivioSarikas Hi there. Everything fine and smooth. I have one minor ... not a problem actualy, just - ... the Video Combine dont show the result in the comfy as a preview... it still save the video to the location, but i cant see the result in the comfy. I have TAESD method on in manager, preview enabled in the node, but still no preview shown. When I switch to another of your workflows, the video combine shows the preview there > switch back to this, run again - still no preview... Would anyone know what am I missing here?
seems table diffusion 1.5 no longer available any other options?
Im getting this error pls help
The size of tensor a (356352) must match the size of tensor b (6144) at non-singleton dimension 1
Also when installing multiple custom nodes, you can use the checkboxes on the left hand side, left of the ID column, once you have selected all the nodes you want, hit install on one of them and all of them will install, saving you time having to do it one by one and waiting for it to finish before starting the next install.
Used to love makin videos but my finance and time are limited for waiting or producing. 3060 still overwhelmes with this
It's totally impressive how you've build the workflow to get the best quality with this addon. I really like the switch you've implemented. I think this is a really interesting new technology and with everything build into ComfyUI it's ready to use, everything customizable of course. Great video about great advancements.
im also getting the same missing nodes even after installing them and restarting. I have tried re-installing, uninstalling and all.
same..
Cannot import E:\ai\ComfyUI_windows_portable\ComfyUI\custom_nodes\ComfyUI-3D-Pack module for custom nodes: No module named 'diff_gaussian_rasterization'
Cannot import E:\ai\ComfyUI_windows_portable\ComfyUI\custom_nodes\ComfyUI-AnimateAnyone-Evolved module for custom nodes: cannot import name 'PositionNet' from 'diffusers.models.embeddings' (E:\ai\ComfyUI_windows_portable\python_embeded\Lib\site-packages\diffusers\models\embeddings.py)
tried installing them manually and it refuses that too because the destinations don't exist
This is totally crazy what you're doing here, great video, keep it up!
hi, i have a problem, i don't now how to open the workflow :(.
i install all models and that but at the end i dont know how to open the workflow.
I have loaded a short video but no output in Video Combine
some of the missing nodes are not showing up in my comfyui manager
I have a question, its possible to do a 30 seconds video for example? if the densepose duration is 30 seconds? ... I have that problem, i can create only 3seconds videos ..
I have a problem with your Workflow ... It's instally the 3D module, i cant. I dont know why, any hint?
this is cool how would i be able to upload my own images to be animated?
Double click one the background, type load image, select the load image node, connect it to the image input that I made between the first and second group, load the image
Thank you again. It seems like we can use SDXL models to create the art that will be piped thru the Animate Anyone, correct?
Yes, you can use any image with the 512 x 768 resolution
i did everything in the video and when i download the missing custom nodes, restarting ui, there r still red boxes, and when i click on queue prompt, i got a KeyError: "class_type" message on cmd, and an unknown error in the ui
This WF requires Comfy UI 3D custom node which is seriusly problematic to install. It does not work via the node manager and manually I failed (yes, user error, but still...)
Hi, thanks for everything, where can i find the pose image ?
Some weights of the model checkpoint were not used when initializing UNet2DConditionModel:
['conv_norm_out.weight, conv_norm_out.bias, conv_out.weight, conv_out.bias']
loaded temporal unet's pretrained weights from /pretrained_weights/stable-diffusion-v1-5/unet ...
^C
Is there any way to use lcm lora with this plugin? It is very demanding ad it can be really slow if someone does not have a really powerful gpu. With a 3070ti it will take ~1 minute or more per frame, and even reducing the amout of steps there is no big gain in time
i get this error-message: "SyntaxError: Unexpected non-whitespace character after JSON at position 4 (line 1 column 5)" - Can anyone help me how to find the position of the syntax error?
HELP!!! ComfyUI Nodes for Inference.Core failed and unable to install it! Where else can I get it?
This is cool, but how to do it from a single image you load into comfyui?
Thank you for this! I'm just curious if this works for other things like a skateboard trick (with a skateboard) or a boxer throwing a punch combo, etc?
Might be a bit complex but give it a try 🙂
Is it only for comfyui on windows machines with an Nvidea? can't get it running on my apple silicon
are you able to use a video2densepose instead of the stick figure? Or how do u generate that?
btw. Tutorial for A1111 was yesterday ;) check it before you dislike.
The file that goes into the clip vision folder when downloaded is a zip file which when unzipped is a folder. Is this normal or does this have something to do with me using a mac?
I tried comfi UI with same prompt minimum nodes no extra close to stable diffusion stable diffusion was lot better in quality n resolution pixel too
I just dont know what was the purpose of comfi UI to exist
Installing Animate-Anyone messed up ComfyUI, doesnt load with the Assertion Error - Torch not compiled with CUDA enabled
First install pytorche with cuda (using comfyui python embeded), next update diffusers to ver 0.26.2 (same way), last when open workflow replace old red nodes to new one (same names). Cant isnert command here, yt delete my answer.
@@Trujnug Thanks much
I've ignored video previously because it still had a long way to go for what I wanted. This is starting to get close so I think I'll take a look Also, thanks for adding the face detailing and video to pose into the workflow. That's really useful and others have been ignoring it.
can this be used somehow to just render keyframes or in other words the same character in different poses ? i dont need fluid animation, just wanna render keyframes of selfmade openpose keyframes (exported from blender openpose rig). Or does the model rely on previous frames which are close to the new frame ? ?
Wondering if anyone could help me with some info. I use midjourney now, but I would like to do it locally on my own computer. I know we're in the process of this getting better, but I'm mostly interested in consistent characters and video motion added to the images. I'm guessing I use stable diffusion. But do I use ComfyUI? What is A1111? It's all a bit confusing.
So A1111 is where you want to start, then when you get the hang of that, move to Comfy if needed.
stable-diffusion v1.5 page shows a 404 page
Everyone shows dancing, It cant be another animation ?
Sure it can, but dancing is what most people use it for. Just use a video with a person doing something else
Hey guys i'm new I haven't installed comfyui Yet as I am still learning a111 my question is With this set up Could I add a character I drew and make him Dance?
yes
fixed the error by running the update comfyui with python dependencies
Great Video, thank you
Thanks for the tutorial AND for sharing the workflow!
I await the days in which this actually looks "nice and smooth". These are impressive results for sure, but still pretty janky.
Probably in a year
Thank you so very much!
Is there a resource where one can download more animated pose mp4 files? EDIT: Answered (8:50) 😊👍
I ran out of space on my drive because of all these extensions, models and Loras that keep coming lol
You can delete the stuff you don't need
@@OlivioSarikas yeah, moving many items to a separate drive, will copy-paste them back in when needed. went overboard with downloading way too many loras/models early on
buy an external ssd if you have usb3.. works wonders for me
I learn a lot of new things from your video. You explain things in great detail and I really like it. Thank you so much, Olivio!👍
Thank you for the tutorial! I tried 60 frame rate and the animation looks quite smooth but too fast sometimes lol.
So you got it working properly? Most comments here say it's not working..
Ouu this is gonna be awesome
Finally thank you!
This is a great workflow, Thank you.
I love your tutorials. Clear and nice voice, easy explanation and cutting edge topics. The best AI channel on YT! Thank you for your work.
thanks
Very Thank you, this is amazing.
Anybody else thinking of rule 34/35 of the internet? I can't be the only one.
sad that requires RTX 3080 and above... with my RX 570 8gb will be done for 2030 lol
world is better when we keep same files as same names. some files allready had and they was diff name but sha same like they are many many many models same files. why make new LOL. reason diff models give same images.... bcoz they same lol
🙏
Put a warning on this tutorial. Will have serious effects on Comfy installation.
Not your best work my brother
Totally agree. It completely messes up your Comfyui if you do not have an environment with CUDA 12.1.
Why is this video incomplete? I dont have any ComfyUI folder.
Isnt this a tutorial? Dislike
because a video about photoshop does also not start with how to install photoshop. you need comfyui to use comfyui... that's kind of common sense
❤👍👍👍👍
it is called comfy ... and it is a lie 😀
Dreckspatz
This broke my ComfyUi. "AssertionError: Torch not compiled with CUDA enabled"
Got it wo start again but with "ImportError: cannot import name 'GLIGENTextBoundingboxProjection' from 'diffusers.models.embeddings'"
Yep, same here, you'd think updating the diffusers models would fix this, but it doesn't. So i'm stumped. And nobody seems to know how to fix this right now. @@magnushhogberg