thanks for the video !!! can you tell me if this only works with hibernation? If its fully off it will not work? Sometimes on any desk it shows that the client is off but the pc its actually on and running, idk how to fix that
@@Dz0n1213 this video is 50/50 Guy phone and PC was connected to same router i think. he made general setting. But if I will be using 4G this will not work need more deep settings
Cool. This should also work if you try to power up from an anydesk client outside your network (i.e. external) but only if at least one device (your phone) is still connected to the local network (i.e. in your house/apartment). Did you try this out?
@@Dz0n1213 a ipad would be working aswell right? And i tested it just the normal way with wlan but it didn't even boot up idk why but i got the normal wol to work so idk
hey this works even if the pc i want to wake up isnt on the power?or it has to be on the power? i mean if the power falls of? i can wake it up only if its on the internet?
It didn't work on my system. It only works with local network. I need to run it with mobile network. What should I do? If I turn on wifi on my phone it works, it doesn't work with mobile network.
this worked for me only on same local network. I need the same operation with different network through internet from different location. Eg. i need to remotely wake up my office system.
if power goes off, you have an option on the BIOS to restore previous state (depending if it was off or on) or turn it back on after power loss, its in pwr management
But did you know "Hibernate Mode" damage SSD disk system? Windows 10 strictly recommended that "if you use SSD don't use Hibernate Mode. Then how we do is without "Hibernate Mode"? Thanks for the video
the option to enable wake on lan and power management option are not visible to me for Ethernet, but all these option are available for wifi adaptor. i have enable wake on lan in bias.
@@enkmarketing8947 do i need old version on my phon too cuz i enabled it on pc but its still not working i press power on on my phon but my pc doesnt start
Thanks for the clarification but your music distorted the concentration. Try next time to use meditated one. This is not war my good friend.
hahahaha yah me too my eyes followd the music from left to right hahahaa
Just turn it off
Muted instantly
It's just perfect. Thank you. There is no need for the hibernate option. That's what I wanted.
thanks for the video !!!
can you tell me if this only works with hibernation? If its fully off it will not work? Sometimes on any desk it shows that the client is off but the pc its actually on and running, idk how to fix that
Ah yes, always refreshing the desktop for no apparent reason. 😂😂
thanks , great detailed tutorial
I had followed all that steps which you have shown in video, but then also its not working.......so any idea or any help you can do for me ??
Did you do enable wake on lan correctly in BIOS?
@@Dz0n1213 this video is 50/50
Guy phone and PC was connected to same router i think. he made general setting. But if I will be using 4G this will not work need more deep settings
Thx now when i come from school and my moms tells me all stuff my pc is already booted up xd
Its not working if i am not in the same wifi network On the lan cable is the same please help
Same problem, any help sir?
Same here
the WoL settings on Anydesk are grey'd out. I do however have a button to unlock it but all it does is open a copy of the same window
you need to pay the license
@@VamberFR it was a payed license at the time of that inquiry
Very good. Thank you brother!
Cool. This should also work if you try to power up from an anydesk client outside your network (i.e. external) but only if at least one device (your phone) is still connected to the local network (i.e. in your house/apartment). Did you try this out?
I want to try this but i don't have any old phone at my home ;-;
does it have to be my phone or just an old device which just lies around
@@4_Shinu you need a phone where you can install Anydesk, it has to be touch mobile
@@Dz0n1213 a ipad would be working aswell right? And i tested it just the normal way with wlan but it didn't even boot up idk why but i got the normal wol to work so idk
It doesn't work because 2nd phone will have different id
It's possibile with shut down option for te pc?
Hey bro, what's the Anydesk version are you using? Looks this is an old one.
My laptop don't have UEFI firmware, can I use this feature with legacy
Operating mode for wake on lan in anydesk is grayed out and set to disabled. How can I enable it?
Me to
can you this when your desktop is using a wifi connection?
does this work if the computer is fully shutdown? not just hibernating?
I shut down fully and it didn’t work
It's need mobile and pc same wifi connection?
hey this works even if the pc i want to wake up isnt on the power?or it has to be on the power? i mean if the power falls of? i can wake it up only if its on the internet?
I've got the same question
It didn't work on my system. It only works with local network. I need to run it with mobile network. What should I do? If I turn on wifi on my phone it works, it doesn't work with mobile network.
It's because both have to be connected through the same source. Mobile network os a different connection to the wi-fi that the computer is connected.
this worked for me only on same local network. I need the same operation with different network through internet from different location. Eg. i need to remotely wake up my office system.
did you find a solution?
@@mikebiff no
what if electricity goes and back again. Then does it work? And also if im outside (far away home but want to control my pc) can i power up?
Same question, Kindly answer it Smart Tech Manish
thank you..
if power goes off, you have an option on the BIOS to restore previous state (depending if it was off or on) or turn it back on after power loss, its in pwr management
Earlier it was working well but from the last few months it's started giving me the error no device found for wake on lan.
Can anyone assist me.
Can i do this without Ethernet cable, with wifi
But did you know "Hibernate Mode" damage SSD disk system? Windows 10 strictly recommended that "if you use SSD don't use Hibernate Mode. Then how we do is without "Hibernate Mode"? Thanks for the video
Hey bro, I have a SSD and a Hibernation mode activated, and all is ok for 3 years
Hibernation mode was not recommended for mechanical drives ..to reduce excessive wear and tear ... however this is not applicable to SSDs.
thanks mate... its work dude
Can you do this with scripts without apps?
this only works on wifi or over 4g/lte too ?
the option to enable wake on lan and power management option are not visible to me for Ethernet, but all these option are available for wifi adaptor. i have enable wake on lan in bias.
thanks bro it worked..
does it work if we are using free anydesk?
I don't see a "power management" tab in my network settings.
Nice Thank you very helpful
Can we turn on pc with different network?
I don't have the Wake-On-Lan options to enabled on Anydesk. Your license does not allow this feature
I think that they have made it only for premium license (you have to pay for it)
@@dark_master7224 It's working with old versions (download version 7.0 )
@@enkmarketing8947 do i need old version on my phon too cuz i enabled it on pc but its still not working i press power on on my phon but my pc doesnt start
how to do with WAN (over internet not in LAN)
Omg thx for 3d music
please show me at minutes 2.16 what ID that?
My wake on lan option is not locking in anydesk
But it doesn't work when pc off directly
thanks for your information 🙂🙂🙂
does it work with wifi?
Smart Manish 🔥
Only work with the payable version of anydesk
Are you also able to remotely turn off your pc?
You can create a .bat file for shutdowning your pc
very nice thank u
Is there someone behind the scenes turned on the computer with the power button?)
I did not find those settings I did find advance but I did not find those LAN features
CANT find wake on lan in bios
Qualcomm Atheros QCA9377: i cant see "wake on magic packet" in advanced tab 😔
TOP!!! Muito boa a sua dica, parabéns Brow
Bro mere bios me wake up ka option nhi de rha
lol how you know ur ID before installing it , also how the Desktop shows up there with no setup !!! no ID , no setting. and that music....
Not working on surface laptop 4
Interesting
Thanks for all
thank u
are you testing my headset?
Good
My laptop it not work 😞
Good 👌
The big thanks
AMAZING MAESTRO
Спасибо за видео
Но нового русского пирата я так и не дождался
Its not working bro
05/05/2022 worked like a charm
Super duper
tenxs
Thx
What is the name of the music in this video?
Dubstep sth
👌👏👏
Thanks!
Cool 👍
turn it on from SHUTDOWN not hybernate or whatever u call it. 🤦
Helpful
Too much complicated for me 😄
👍
Kalo windows 7 bagai mana settingnya?
is not working for usb wifi adapter..
Not working
Plz. Off the Music.
Lose the noise
Não deu aqui
٤.٢٩
Como consigo a id do celular? às 2:36
é só baixar o app do anydesk no celular também. ele aparece lá
@RoxyTXT it was a payed license at the time of my enquiry