What you've got there, mate, has been a staple of American starter layouts for over 70 years. Alongside the 0-4-0 Docksider saddletank, it is probably the most common first locomotive bought for children just getting into the hobby. There's been a few versions and makes through the years; Athearn, Model Power, Tyco. It's cheap, it's nasty, but it's how 99% of us got started. Edit: 80 bloody quid for that?! Were you drunk? Did you lose a bet?
My Varney Docksider "Little Joe" could pull about eight streamline cars around my layout. The addition of some of Walthers' lost-wax castings really dressed it up (in my imagination).
@@anthonymiller8979 That brings back memory's from my childhood of trains that would not start, and when finally coaxed, just flat out, then guaranteed to derail.
@SamsTrains back in the day, the original model was a rubber band drive all wheel drive. Originally came out in the 60s I believe. They were cheap models but the original band drive models were insanely fast, often derailing at full speed and flinging themselves across the basement
@@SamsTrains It’s under the Model Power brand like the one in your review. I’d say it’s from the 80’s and was handed down to me from my brother. Apart from the rear coupler being broken it’s in very good condition. It does stink up the room after I run it for a while
Hey! I have an idea. Instead of destroying the locomotive, you can use it as a scrap scene and set it up in a boneyard. Superglue the axles and make it look all rusty and abandoned, maybe with scrappers cutting away at it.
@@SamsTrains oh this is funny, for some reason Sam’s laughter gave me a google prompt to translate it to English, and clicking on it simply capitalised the “H” in hahahahaha!
Oh, this is a fascinating one. The tooling is from the 1960s (at the latest) and was originally sold by Marx. Marx was an American toy company that traditionally catered to the very bottom of the toy train market. The Marx switcher bore a striking resemblance to the even older Athearn Hustler, introduced in 1957. The Marx version has the full side skirts you see in this example. I don't remember if Model Power ever actually sold this model but they probably did. Model Power was a clearing house brand that sold rebranded merchandise from other, usually foreign manufacturers. Their very best locomotives in the 1980s were made by Mehanno, who do reasonably good work at a low price point.
Thanks a lot for sharing some background - it's a very interesting situation! I am wondering what the story behind this knock-off was! Thanks for watching - Sam :)
Somewhere I have the very same "Marx" made switcher you mean, and have had it since the 70's. Yes, this looks like a very poor copy of the Marx original.
The original Hustlers were produced by Athearn with a metal chassis with an outside frame and rubber band drive on both axles. The frame was easily split to install new rubber bands. At a then USD price of 4.99 or less, these speed demons could launch themselves off the layout in any curve. When Lionel got into HO scale in the early sixties they had a gear driven version. Both featured single trumpet horns on each side of the hood., the body was a tension fit. The later cloned MP versions were / are ideed rubbish.😢😂
I remember my Hustler and the speeds! I'd put it up against Sam's Speed trials any day. Regrettably, Athearn put the same awful drive in their F7's and GP-9's, with the resulting pulling power of a mouse.
I will say one, tiny thing in its defense: the horn-hook coupler is supposed to spring to one side, not return to the center. That's how they stay locked together. I'm pretty sure that this is the latest incarnation in a long line of similarly cheap and nasty Hustler "models". You reviewed a rubber band drive switcher some time back which might be related to it - or maybe not, I'm not going to bother tracking that information down right now.
I'm glad this loco has 'opened your eyes' because, did you even look at the picture on the website? It was so clearly a piece of cheap tat; no added detail, unpainted wheels and a less than convincing appearance. I thought you were going to say that it turned out to be clockwork!
As others have mentioned, the body was developed by toy company Marx in the 50’s. After they went out of business, the tooling went to Mehano, and they made a cheaper chassis to sell these as cheap starter models through AHM, Model Power and Bachmann. The chassis has continued getting cheaper through the years, swapping metal axles for plastic, a 5-pole motor for a 3-pole and then an even cheaper 3-pole, dropping the nickel plating, and then swapping the lead weights for zinc. Model Power was the last company who dared to sell these along with the much worse Playart 2-6-0 and other very cheap models with old tooling.
wonder if Sam knew this literally is the tooling of the first ever ready to run HO scale train. You can find these in the US usually for $2. Shell is pre WWII. And slight correction. Most model train wheels are nickel plated brass.
As the only real down to earth model railway reviewer who will go out of the way to bring us videos of extreme products I can wholeheartedly say I feel for you, this is a proper pants down promotion! I kind of know how you feel because I felt the same way when Hornby tucked me up a while back, what doesn’t destroy you makes you stronger, you will be rewarded in the future and look back and laugh, thanks for sharing.
Was thinking the same - I bought the steam outline equivalent, very akin to the USATC S100 switcher/shunter from WW2 but as an 0-4-0T, brand-new for roughly £15 in about 2005. The diesel outline Sam has, and the 'Plymouth' version with a lower bonnet, were listed at the same price. Aha! An old Railway Modeller magazine I have to hand shows me the UK distributor I bought that from would've been Shrewsbury Model Centre, showing "Li'l Tugger" (the steam loco), Plymouth DDT, and this Porter Hustler all listed at £9.99 plus £2 postage in August 1999.
If it makes you feel any better, I've bought a medium-sized Sam's Trains T-shirt from the Bullman Emporium. I've chosen the sapphire blue colour. I've been wanting one for some time. Also, I've taken my first step into the N Gauge Railway world. I'm a tad nervous about handling the tiddly-fiddly track and Guard's Van I've bought from two different places. I'm afraid of causing damage by mistake. Uh, is it too much to ask if I could have a modeller's guide to N Gauge track, engines and rolling stock?
IIRC Model Power went out of business in 2014. They sold some decent N scale stuff, but their HO range was mostly junk that had been in production since the 1960s.
I don’t own any trains, I’ve never had an interest in ever having a model railway but your videos are some of my favourite on UA-cam. I consider myself a collector by proxy through your account. I really enjoyed this review, made me laugh a lot
I got a lot of laughs out of this video, and yes I watched all the way to the end. I particularly enjoyed your use of the word 'foul', as in 'It looked foul.', 'It smelled foul.', etc. I'm just sorry it cost you so much. But I did enjoy the video, it was very funny. 😂
One of the most amusing reviews I've seen for anything. I'm half wanting a video on seeking out and comparing the worst possible "models", a sort of what is the worst that money can buy series. Thanks Sam, obviously you're not happy about being fouled but it was a great video
That's an ancient locomotive. We haven't used those type of couplers since I was a kid. Kadee couplers have been the default for many years, even on the cheapest models. And since we don't use NEM pockets in America, they can't be replaced easily.
Yeah, it is based off H.K. Porter's little diesel switchers of the '40s or so. They varied in various details like side rods or not, length of the frames, and stuff like that, but they were broadly similar to this. Also, a lot of them were ~3' gauge, this one is a bit unusual for being SG. It also may not be wired up backwards, a lot of switchers like that were ran cab-forward for better visibility.
That Model Power loco likely dates back to the early 1990s which is why the box was so beaten up. The design with modifications dates back to the 1970s, perhaps 1960s by PMI.
Hi Sam! Model power went bust in 2014, much of its stock got sold off to 3rd parties before the company was bought by MRC then Lionel. That said, this locomotive, which came from Marx who were bought out by model power and was never updated, was clearly built many years before, as noted by the horn hook couplers that it came with, these went out with the early 90's and were the one exception, as well as the wear and tear on the packaging and the smell, old dried out brushes. Also, in case you were wondering when I said Lionel bought model power, remember that derailing Lionel army hospital trainset you reviewed? Yes that's right, its coaches came right from model power's catalog, with the exception of metal wheels.
Good video Sam it’s a bit sad you got scammed. But for future reference I believe those couplings are known as horn hook couplings which are meant to point towards the right hand side.
What might be interesting would be a side by side comparison of that loco with the Triang Docklands shunter. From some of the other comments it would appear the designs hark from a similar period.
My first model train locomotive as a child in the mid-1990s was very similar - A Hustler, albeit a red one by Athearn. All-wheel drive with the dreaded rubber-band drive system. Split chassis design, with pickup via the ends of the axles. Had plenty of enjoyment with it, though. Still remember visiting bookshops to find the smallest rubber bands available - we didn't (and still dont) have any official model train shops in Sri Lanka. Still got the loco in storage - it needs some TLC (and of course, new rubber bands), but the motor runs.
I bought one in the noughties, it was £10 new. The model was regularly advertised in the UK modelling press as Bachmann USA. It's a very good runner, and great basis for customisation.
@@SamsTrains On second thoughts it may have been Model Power. Bachmann USA sold a similar range of American outline diesels in the UK, that were a fraction of the price of similar British locos. The price is correct however.
Back in the mid 90's my grandma surprised me with one of these we weren't very close so I was happy to get anything from her and most of my trains at the time were cheap Bachmann, Life Like, & old Tyco so it fit right in...
I can see the case for running cab end forward. Unfortunately they put a red LED where the headlight would be so that's a fail. I think trains are like shoes. Unless I am buying more of a brand where I am familiar with the quality and fit I'm going to want to see it in person. I agree with others who suggested dropping it on a derelict track next to a wrecking crew, so sorry about the cost.
These units are usally used here in the states at industries to help move cars through loaders or loading docks because normal locomotives would be too expensive to operate or too big while some class ones like SP might of had them they were usally used in loco shops to move locomotives to other repair stations
Lol I have a Chessie System one from my Grandfather who passed before I was born. I got all his model trains and It’s a personal favorite of mine because it runs pretty well.
Sam, most of us from America grew up with these horrid all plastic toys. You can buy them for less than five dollars in the U.S. Sorry you paid so much for such a lowly product!
I have a few Model Power units in my HO collection, and overall they’re pretty good starter units and they run pretty well. The little hustler unit looks to have come from the 80s. The couplers are horn hook couplers, an old style of HO coupler used in the states and most of them were not centered due to the spring in them. Much of my rolling stock and older locomotives had these and I changed them out.
I have the same model but in CN version. Run great but can barely pull 3 boxcars. It will be part of a future project. Converting it to dcc,Add weight on it and make it capable to pull 7 hoppers. Simulating a little mining company shunter
Reminds me a lot of a Playcraft (Jouef) 040 diesel shunter that I had in a train set from Woolworth’s, around 1965. Vertical motor in the cab, brass wheels, bad smell etc. Eventually, it caught fire and never ran again.
I have a few versions of that Jouef model, they are all great runners to this day. They were entry level toys, and must be 60 years old by now. And they were much less than £80.00.
I met this loco in "Atlas" and "Tyco" boxes as well, but I think it (the body) was (probably still is) an old Marx tooling from the 1960's; its similar but not identical to Athearn's "Hustler". The Atlas chassis ones are quite robust, and reliable. (maybe those were ex Athearn Hustlers?). BTW the couplers it came with are not as bad as u think, I still use those.
So Model Power was a budget company here in the states mainly meant as toy trains for kids. Their models usually go for dirt cheap here at trainshows here. Not exactly the most high end manufacturer in the world.
i have some model power stuff that i have for dang near 30 years. Just got back into model railroading and cleaned them up and they ran like new i ran them hard when i was a kid but they have never giving up on me.
I really wish you wouldnt give away how the loco is in the title. One of my favourite aspects of your videos is going on the journey, making the discoveries with you.
Piko G.D.R. had the same loco in an even trashier looking delivery without any signs or paintings on it in the train sets for kids 50 years ago. Some even had rubber strings instead of gears. Atleast they had both axles driven. I still have a NOHAB with rubber strings from the same time in my collection.
I played with 2 or 3 of these as a kid from my dad's collection. His were rubber band driven, went super fast, and couldn't pull but 3 or 4 cars... when they worked.
i have one of the loco's and it runs great i use it has a yard switcher, plus i have plent of model power rolling stock in both HO and N never had problems with their freight and passanger cars
The body looks nearly identical to a Marx HO locomotive I have from the 1960's, only the mold quality seems to be even worse! IDK how they compare in terms of performance, as mine is all gunked up from being in my great uncles basement for 40 years.
21:17 you are dumping current through exposed lines across your room, the locomotives themselves are pretty tame and you should ve standing right there watching anyway.
This is the type of model that you give to kids to get them started in the hobby (the horn-hook couplers also denote that). We ordered and imported these in our own custom livery from Trainworld. At the time (2005/2006) we sold it for R95 (about R260 in today's value) in Pounds that is around 7 pounds sterling at the time.
That looks like a Chinese knockoff of the Athern Hustler, which had all wheel drive powered by rubber bands. The motor is mounted longitudinally with extended output shafts where the flywheels would be mounted. The rubber bands were wrapped around the shafts to drive the axles which were almost as large as the wheels in diameter.
It's like old Mehanotehnika (AHM for Yugoslav market) locomotive. If you have one of these 40 years old "models" like me, burning smell and loud noise of a motor is such a common thing.😂
I remember selling those things in the 1980s in Australia. They represented good value for the prices being charged back then. Model Power distributed models made by a number of manufacturers around the world, including Mehano. In fact I seem to recall these models were marked as being Made in Yugoslavia by Mehanotehnika. Yep! Mehano. That might explain a lot. ;-)
Not a really prototypical model of a Porter industrial switcher (Shunter). We call them “critters” here in the States. You would have been better off buying a Bachman 44-tonner or 45-tonner.
That industrial switcher resembles a Plymouth to be honest. Porter DE35 is the closest 'Porter' locomotive I could find. SP 6708 should be a GE U25B or GE U25BE ( depending on time period ).
I used to have one that was in the Chessie System livery that gave me nothing but many years of service but when I made the switch to o scale a friend of mine kit-bashed it into an on30 scale gas mechanical boxcab. Maybe you could make some improvements by making it your own locomotive via the 3D printers and fixing the wiring.
These were always advertised in Railway and Continental modeller for 10 pounds about 25 years ago. I always wondered how good they were for something that cheap.
I bought a second hand AHM "Milwaukee" 35-ton shunter with the same type of drive mechanism to it. It worked fine until the motor died, and to make matters worse I lost the motor pinion. I sourced a replacement pinion, which needed work to get its bore to the required diameter. and replaced the motor with a modern 21,000 rpm slot car motor. In order to fit it, I glue the old motor stator housing sides to the new motor with a small block of wood at the back, and then epoxied the unit in place. The pickup arrangement is the same as on your model, but I think the wheels are plated steel ones. It runs really well, even at low speeds, although it can lose its wagons as the rear coupler is not centering properly. I have also replaced the bulb at the front of the loco with an LED, which is controlled by a small circuit board that gives it a constant current regardless of the supply voltage. A small bridge rectifier in the circuit means the light operates regardless of whether the loco is moving in the forwards or reverse direction. Despite all of the issues I have had with it, it is running reliably, and I am happy with its performance on my small oval layout.
As others have said, this is a very old design. I had one in the 60s, as a young teenager. Why did I have it, because I did not have much money, and it was very cheep, both in price and quality. It did run though for many years. The mechanism is the same, as well as the ozone smell. At some point they added the LED, after my time. I later found out that in addition to all the above, the body is actually closer to S scale, than HO. It always loomed over my other locomotives. Mine was the skirtless version with slide in frames/bearing sides.
What a piece of tat! This makes the hornby beatles train pack look like a premium train set! Awesome video sam, I always look forward to your amazing videos!🎉🎉
I had one of these from about 30 years ago and there was not much difference. The 30 year old version had silver wheels, horn hook couplers (The one on the back of yours was not broken. They always skewed to one side due to the molded plastic retention spring.), a cheap motor, no headlights, but both axels were driven. Also, I think it only cost about $25 when it was purchased new. It was little more than a toy and not meant for a serious modeler in any way. I remember seeing them packed into a “my first trainset” type of box (loco, 2-3 rail cars, a circle of sectional track, and the cheapest power transformer ever produced.) Never ran it much but I do remember what did it in. One of the plastic axels snapped during one of the few times I did run it. Truthfully, it was no major loss.
Oh wow, seriously old school stuff,lol. I had around six of those. sadly the motors didn't last very long and i ended up re-motoring them. I've seen these for sale at train shows for $10 U.S. .
I had one in HO before I sold it. I think it was under the Santa Fe livery. Don't remember much about it except I got it at, and sold it at a train show. Never ran it, as I only had it for 2 weeks.
After careful consideration Sam, I think what you reviewed here was a "MUTT" (AKA) "Frankenstein" because it don't look like any particular locomotive manufacture's bodywork unless it was made with spare-parts from all manufactures like EMD "the hood", GE "grill work", ALCO chassis, Fairbanks "Operators Cab".
What you've got there, mate, has been a staple of American starter layouts for over 70 years. Alongside the 0-4-0 Docksider saddletank, it is probably the most common first locomotive bought for children just getting into the hobby. There's been a few versions and makes through the years; Athearn, Model Power, Tyco. It's cheap, it's nasty, but it's how 99% of us got started.
Edit: 80 bloody quid for that?! Were you drunk? Did you lose a bet?
My Varney Docksider "Little Joe" could pull about eight streamline cars around my layout. The addition of some of Walthers' lost-wax castings really dressed it up (in my imagination).
My first loco back around 1960. It was yellow, an Athearn I think
The majority of the cost was probably shipping, given the list price he found was 37.
I wonder how many also got totally dismayed with model railroading after trying one of these and never went any further in the hobby
@@anthonymiller8979 That brings back memory's from my childhood of trains that would not start, and when finally coaxed, just flat out, then guaranteed to derail.
I’ve got one of these in a Pennsylvania Railroad livery. After 20+ years of use it still runs like a champ
Blimey that's good to hear - what brand was that under??
Thanks for watching - Sam :)
@SamsTrains back in the day, the original model was a rubber band drive all wheel drive. Originally came out in the 60s I believe. They were cheap models but the original band drive models were insanely fast, often derailing at full speed and flinging themselves across the basement
@@SamsTrains It’s under the Model Power brand like the one in your review. I’d say it’s from the 80’s and was handed down to me from my brother. Apart from the rear coupler being broken it’s in very good condition. It does stink up the room after I run it for a while
@@dannagy546the Athearn Hustlers were amazing, I turned mine into a Railroad drag racer!
@@batmangamer3122 oh that sounds hysterical! Did you add any flame decals?
Hey! I have an idea. Instead of destroying the locomotive, you can use it as a scrap scene and set it up in a boneyard. Superglue the axles and make it look all rusty and abandoned, maybe with scrappers cutting away at it.
Excellent Idea. If I get a locomotive that STINKS, I can just use it as a scrap scene.
I was just going to say that too
The reason for the odd 'bulb+LED' combo is that white LEDs are quite a recent development electronically. Red were the earliest to exist.
Hornby says," Thank you, AliExpress!"
hahahaha!!
@@SamsTrains oh this is funny, for some reason Sam’s laughter gave me a google prompt to translate it to English, and clicking on it simply capitalised the “H” in hahahahaha!
@@Alpha-oo8hahahaha!!
很好！
@@SamsTrains make the motor fail!
I was appalled that the box omitted the unique feature of " creates a smell like burning scalextric and urine" and went with "extra duty" instead
I know... that's a feature they could've marketed!
Thanks for watching - Sam :)
Probably google transliterated.
You sure did get hustled.
haha sure did!!
@@SamsTrainsI wanted to say this is a vintage American model train also you got scamed by the guy who's selling it
Oh, this is a fascinating one. The tooling is from the 1960s (at the latest) and was originally sold by Marx. Marx was an American toy company that traditionally catered to the very bottom of the toy train market. The Marx switcher bore a striking resemblance to the even older Athearn Hustler, introduced in 1957. The Marx version has the full side skirts you see in this example.
I don't remember if Model Power ever actually sold this model but they probably did. Model Power was a clearing house brand that sold rebranded merchandise from other, usually foreign manufacturers. Their very best locomotives in the 1980s were made by Mehanno, who do reasonably good work at a low price point.
Sam did another video on a Aliexpress steam loco that was originally a Piko model.
@@itsconnorstime You ment 2!
I got one of those!!! I got one of the OG Marx engines in a Santa Fe livery, and despite its age, still runs like a champ all these years later haha
Thanks a lot for sharing some background - it's a very interesting situation! I am wondering what the story behind this knock-off was!
Thanks for watching - Sam :)
Somewhere I have the very same "Marx" made switcher you mean, and have had it since the 70's. Yes, this looks like a very poor copy of the Marx original.
🤣🤣This has all the hallmarks of a post-bottle of red wine on a Saturday night purchase.
The original Hustlers were produced by Athearn with a metal chassis with an outside frame and rubber band drive on both axles. The frame was easily split to install new rubber bands. At a then USD price of 4.99 or less, these speed demons could launch themselves off the layout in any curve. When Lionel got into HO scale in the early sixties they had a gear driven version. Both featured single trumpet horns on each side of the hood., the body was a tension fit. The later cloned MP versions were / are ideed rubbish.😢😂
I remember my Hustler and the speeds! I'd put it up against Sam's Speed trials any day. Regrettably, Athearn put the same awful drive in their F7's and GP-9's, with the resulting pulling power of a mouse.
Five bucks is about as much as this thing is worth lmao
I will say one, tiny thing in its defense: the horn-hook coupler is supposed to spring to one side, not return to the center. That's how they stay locked together.
I'm pretty sure that this is the latest incarnation in a long line of similarly cheap and nasty Hustler "models". You reviewed a rubber band drive switcher some time back which might be related to it - or maybe not, I'm not going to bother tracking that information down right now.
Thanks for sharing - it did seem to work okay to be fair!
Thanks for watching - Sam :)
The 'EXTRA DUTY LOCO" line, rather than 'Heavy Duty' on the box made me laugh pretty hard
hahaha I know!! ;D
Should be spelled “doody”
EXTRA DUTY LOCO and only one axle is powered.
I'm glad this loco has 'opened your eyes' because, did you even look at the picture on the website? It was so clearly a piece of cheap tat; no added detail, unpainted wheels and a less than convincing appearance. I thought you were going to say that it turned out to be clockwork!
As others have mentioned, the body was developed by toy company Marx in the 50’s. After they went out of business, the tooling went to Mehano, and they made a cheaper chassis to sell these as cheap starter models through AHM, Model Power and Bachmann. The chassis has continued getting cheaper through the years, swapping metal axles for plastic, a 5-pole motor for a 3-pole and then an even cheaper 3-pole, dropping the nickel plating, and then swapping the lead weights for zinc. Model Power was the last company who dared to sell these along with the much worse Playart 2-6-0 and other very cheap models with old tooling.
wonder if Sam knew this literally is the tooling of the first ever ready to run HO scale train. You can find these in the US usually for $2. Shell is pre WWII.
And slight correction. Most model train wheels are nickel plated brass.
The dark opening... lol.
haha!! xD
These are for sale at our train shows for about $5 CAD (2.88GBP)
As the only real down to earth model railway reviewer who will go out of the way to bring us videos of extreme products I can wholeheartedly say I feel for you, this is a proper pants down promotion! I kind of know how you feel because I felt the same way when Hornby tucked me up a while back, what doesn’t destroy you makes you stronger, you will be rewarded in the future and look back and laugh, thanks for sharing.
These are at least 30 years old.
Oh yeah at least - probably much more - you can tell by the look of the molding!
Thanks for watching - Sam :)
Think mid 60s originally
30? Try 60.
It is a model power shunter. They used to be about 25$.
Was thinking the same - I bought the steam outline equivalent, very akin to the USATC S100 switcher/shunter from WW2 but as an 0-4-0T, brand-new for roughly £15 in about 2005. The diesel outline Sam has, and the 'Plymouth' version with a lower bonnet, were listed at the same price.
Aha! An old Railway Modeller magazine I have to hand shows me the UK distributor I bought that from would've been Shrewsbury Model Centre, showing "Li'l Tugger" (the steam loco), Plymouth DDT, and this Porter Hustler all listed at £9.99 plus £2 postage in August 1999.
the tooling was actually owned by MARX Louis toys, A company that produced budget toy trains compared to Lionel in O and HO scale
Yeah that's what I found too - I really got done with this one!
Thanks for watching - Sam :)
Here’s an idea: take a long segment of straight track, set it up to go out a window, then send that piece of junk out said window at full power
If it makes you feel any better, I've bought a medium-sized Sam's Trains T-shirt from the Bullman Emporium. I've chosen the sapphire blue colour. I've been wanting one for some time. Also, I've taken my first step into the N Gauge Railway world. I'm a tad nervous about handling the tiddly-fiddly track and Guard's Van I've bought from two different places. I'm afraid of causing damage by mistake. Uh, is it too much to ask if I could have a modeller's guide to N Gauge track, engines and rolling stock?
easy, Buy Kato or Tomix track
@@grrfy I've already bought Graham Farish track. That's cheaper yet still 100% good quality.
IIRC Model Power went out of business in 2014. They sold some decent N scale stuff, but their HO range was mostly junk that had been in production since the 1960s.
Not right after the Broadway Limited Blue Goose 😭
Can't see much difference. They're both US cr*p.
haha yeah - quite a contrast!! ;D
Sam I have a box of left handed screwdrivers for sale. They are yours for the bargain price of 89.99 plus 10.99 postage and packing. A bargain!
Do they come with the attractive odor?
love it
Don't forget to throw in the dehydrated water.
you forgot the "WAIT! THERES MORE!" :)
From the Blue Goose to… this. Whatever ‘this’ is. Gosh. This channel’s a rollercoaster, Sam 😂
I don’t own any trains, I’ve never had an interest in ever having a model railway but your videos are some of my favourite on UA-cam. I consider myself a collector by proxy through your account. I really enjoyed this review, made me laugh a lot
When mum says: "We already have model trains at home"
I got a lot of laughs out of this video, and yes I watched all the way to the end. I particularly enjoyed your use of the word 'foul', as in 'It looked foul.', 'It smelled foul.', etc. I'm just sorry it cost you so much. But I did enjoy the video, it was very funny. 😂
One of the most amusing reviews I've seen for anything. I'm half wanting a video on seeking out and comparing the worst possible "models", a sort of what is the worst that money can buy series.
Thanks Sam, obviously you're not happy about being fouled but it was a great video
That's an ancient locomotive. We haven't used those type of couplers since I was a kid. Kadee couplers have been the default for many years, even on the cheapest models.
And since we don't use NEM pockets in America, they can't be replaced easily.
Yeah, it is based off H.K. Porter's little diesel switchers of the '40s or so. They varied in various details like side rods or not, length of the frames, and stuff like that, but they were broadly similar to this. Also, a lot of them were ~3' gauge, this one is a bit unusual for being SG. It also may not be wired up backwards, a lot of switchers like that were ran cab-forward for better visibility.
I use your reviews for buying choices mainly, Sam. This one however was merely splendidly funny 😂 I love the way you can’t help giggling!
It's great of you to review a "cheap an nasty" from time to time, it shows your lighter side and gives us a chuckle or two.
9:30 They aren't made to return to the center hornhooks typically are pushed off to the side to reassure that they stay connected
That Model Power loco likely dates back to the early 1990s which is why the box was so beaten up. The design with modifications dates back to the 1970s, perhaps 1960s by PMI.
Yeah it does look like it was made years ago!
Thanks for watching - Sam :)
Hi Sam!
Model power went bust in 2014, much of its stock got sold off to 3rd parties before the company was bought by MRC then Lionel. That said, this locomotive, which came from Marx who were bought out by model power and was never updated, was clearly built many years before, as noted by the horn hook couplers that it came with, these went out with the early 90's and were the one exception, as well as the wear and tear on the packaging and the smell, old dried out brushes. Also, in case you were wondering when I said Lionel bought model power, remember that derailing Lionel army hospital trainset you reviewed? Yes that's right, its coaches came right from model power's catalog, with the exception of metal wheels.
Good video Sam it’s a bit sad you got scammed. But for future reference I believe those couplings are known as horn hook couplings which are meant to point towards the right hand side.
We actually called them NMRA couplers, but the Association always disowned them.
What might be interesting would be a side by side comparison of that loco with the Triang Docklands shunter. From some of the other comments it would appear the designs hark from a similar period.
The Piko one which looks similar but is another survivor of that era although retains its rubber band drive
That looks an awful lot like an early 1960s Marx's "Hustler" switcher to me...
"Make the axels plastic it'll save money"
"Is it too light? Put some metal bricks inside it"
Those wasp stripes look like the results of the double slit experiment if the unobserved photons were on steroids 💀💀💀
My first model train locomotive as a child in the mid-1990s was very similar - A Hustler, albeit a red one by Athearn. All-wheel drive with the dreaded rubber-band drive system. Split chassis design, with pickup via the ends of the axles. Had plenty of enjoyment with it, though. Still remember visiting bookshops to find the smallest rubber bands available - we didn't (and still dont) have any official model train shops in Sri Lanka. Still got the loco in storage - it needs some TLC (and of course, new rubber bands), but the motor runs.
I bought one in the noughties, it was £10 new. The model was regularly advertised in the UK modelling press as Bachmann USA. It's a very good runner, and great basis for customisation.
Blimey - I'm hearing that this has appeared under all kinds of brands!!
Thanks for watching - Sam :)
@@SamsTrains On second thoughts it may have been Model Power. Bachmann USA sold a similar range of American outline diesels in the UK, that were a fraction of the price of similar British locos. The price is correct however.
The Model Power toolings for the switcher diesels and 0-4-0 have been acquired by Evemodel
Back in the mid 90's my grandma surprised me with one of these we weren't very close so I was happy to get anything from her and most of my trains at the time were cheap Bachmann, Life Like, & old Tyco so it fit right in...
I can see the case for running cab end forward. Unfortunately they put a red LED where the headlight would be so that's a fail. I think trains are like shoes. Unless I am buying more of a brand where I am familiar with the quality and fit I'm going to want to see it in person. I agree with others who suggested dropping it on a derelict track next to a wrecking crew, so sorry about the cost.
That title says that i have a cozy new video to enjoy this evening!
Thank you sam for providing me with such!
Literally this embodies the whole of American model railways in the 90's.
Sam, its okay to admit you bought this after a night of way too much drinking at the pub😂
These units are usally used here in the states at industries to help move cars through loaders or loading docks because normal locomotives would be too expensive to operate or too big while some class ones like SP might of had them they were usally used in loco shops to move locomotives to other repair stations
Lol I have a Chessie System one from my Grandfather who passed before I was born. I got all his model trains and It’s a personal favorite of mine because it runs pretty well.
Sam, most of us from America grew up with these horrid all plastic toys. You can buy them for less than five dollars in the U.S. Sorry you paid so much for such a lowly product!
haha I know - once I found that it was Model Power I was able to look it up... and I saw how cheap they were!! ;D
Is that a 3D-printed adapter coupler on the end of the accursed train?
I have a few Model Power units in my HO collection, and overall they’re pretty good starter units and they run pretty well. The little hustler unit looks to have come from the 80s.
The couplers are horn hook couplers, an old style of HO coupler used in the states and most of them were not centered due to the spring in them. Much of my rolling stock and older locomotives had these and I changed them out.
this was worth watching to the end, it was like so bad i had to keep going! well done and glad you did it so noone else has too.
I have the same model but in CN version. Run great but can barely pull 3 boxcars.
It will be part of a future project. Converting it to dcc,Add weight on it and make it capable to pull 7 hoppers. Simulating a little mining company shunter
Reminds me a lot of a Playcraft (Jouef) 040 diesel shunter that I had in a train set from Woolworth’s, around 1965. Vertical motor in the cab, brass wheels, bad smell etc. Eventually, it caught fire and never ran again.
I have a few versions of that Jouef model, they are all great runners to this day. They were entry level toys, and must be 60 years old by now. And they were much less than £80.00.
I met this loco in "Atlas" and "Tyco" boxes as well, but I think it (the body) was (probably still is) an old Marx tooling from the 1960's; its similar but not identical to Athearn's "Hustler".
The Atlas chassis ones are quite robust, and reliable. (maybe those were ex Athearn Hustlers?).
BTW the couplers it came with are not as bad as u think, I still use those.
Originally Athearn, with rubber band drive. Lionel also offered it with a great drivetrain.
So Model Power was a budget company here in the states mainly meant as toy trains for kids. Their models usually go for dirt cheap here at trainshows here. Not exactly the most high end manufacturer in the world.
Got a gold Athern hustler used to put a paperclip with a track rubber behind it to whizz round to clean the track
i have some model power stuff that i have for dang near 30 years. Just got back into model railroading and cleaned them up and they ran like new i ran them hard when i was a kid but they have never giving up on me.
Rather than being wired backwards, is the loco intended to be operated cab first, like a British Class 08?
Great video as always, Sam! I have actually got some quite nice stuff from model power but this really is terrible!
My first loco was a 0-6-0 steam TT thingie made in 1966 by Tillig. Still running.
I really wish you wouldnt give away how the loco is in the title. One of my favourite aspects of your videos is going on the journey, making the discoveries with you.
Sorry! Got to use engaging titles in order to make the channel work!
Thanks for watching - Sam :)
@@SamsTrains i understand the reason behind it. Titles can be engaging without giving away the outcome.
The thing is a lot of people are going to search UA-cam for reviews of a particular product and if the name isn't in the title it won't show up.
@@caw25sha i dont mean the name of the product. I mean the outcome of the review. "Brilliant", "terrible" ect
@SamsTrains are you sure?
Piko G.D.R. had the same loco in an even trashier looking delivery without any signs or paintings on it in the train sets for kids 50 years ago. Some even had rubber strings instead of gears. Atleast they had both axles driven. I still have a NOHAB with rubber strings from the same time in my collection.
The cab houses the traction motor 😂😂😂😂😂
Sam, don’t forget to salvage the metal knuckle coupler out of this thing before you toss it; the coupler is worth more than the entire locomotive! 😅
And the brass of course . . .
He could break it down for parts: the light bulb, the red LED, the motor, even the brass wheels could be used on non-powered rolling stock.
I played with 2 or 3 of these as a kid from my dad's collection. His were rubber band driven, went super fast, and couldn't pull but 3 or 4 cars... when they worked.
if you put enough weight behind, will it run slow at one point or just wheel slip?
i have one of the loco's and it runs great i use it has a yard switcher, plus i have plent of model power rolling stock in both HO and N never had problems with their freight and passanger cars
Its the Model Power Porter Hustler and Walthers still lists it but its not available. Evemodel lists it now for 35 quid.
The body looks nearly identical to a Marx HO locomotive I have from the 1960's, only the mold quality seems to be even worse! IDK how they compare in terms of performance, as mine is all gunked up from being in my great uncles basement for 40 years.
21:17 you are dumping current through exposed lines across your room, the locomotives themselves are pretty tame and you should ve standing right there watching anyway.
This is the type of model that you give to kids to get them started in the hobby (the horn-hook couplers also denote that). We ordered and imported these in our own custom livery from Trainworld. At the time (2005/2006) we sold it for R95 (about R260 in today's value) in Pounds that is around 7 pounds sterling at the time.
That looks like a Chinese knockoff of the Athern Hustler, which had all wheel drive powered by rubber bands. The motor is mounted longitudinally with extended output shafts where the flywheels would be mounted. The rubber bands were wrapped around the shafts to drive the axles which were almost as large as the wheels in diameter.
It's like old Mehanotehnika (AHM for Yugoslav market) locomotive. If you have one of these 40 years old "models" like me, burning smell and loud noise of a motor is such a common thing.😂
Model Power was a starter for kids that want to start the model train hobby
And you have to wonder how many were turned off by the experience
@@ROBERTNABORNEY RIGHT!!!!
I have the old Model Power version of this from 70s and it is sweet little engine that runs well.
There is reason why its "backwards" its a mantua handdown "End Cab" switcher.
This is definitely going on the 'Top 5 Worst Locomotives' list at the end of the year.
Wow that's dreadul! I've never seen something so bad - I'm shocked that you actually kept this!
I remember selling those things in the 1980s in Australia. They represented good value for the prices being charged back then. Model Power distributed models made by a number of manufacturers around the world, including Mehano. In fact I seem to recall these models were marked as being Made in Yugoslavia by Mehanotehnika. Yep! Mehano. That might explain a lot. ;-)
Take a shot every time Sam mentions Aliexpress lol 😂
Not a really prototypical model of a Porter industrial switcher (Shunter). We call them “critters” here in the States. You would have been better off buying a Bachman 44-tonner or 45-tonner.
great work another great video keep them coming
That industrial switcher resembles a Plymouth to be honest. Porter DE35 is the closest 'Porter' locomotive I could find.
SP 6708 should be a GE U25B or GE U25BE ( depending on time period ).
I used to have one that was in the Chessie System livery that gave me nothing but many years of service but when I made the switch to o scale a friend of mine kit-bashed it into an on30 scale gas mechanical boxcab. Maybe you could make some improvements by making it your own locomotive via the 3D printers and fixing the wiring.
These were always advertised in Railway and Continental modeller for 10 pounds about 25 years ago. I always wondered how good they were for something that cheap.
I bought a second hand AHM "Milwaukee" 35-ton shunter with the same type of drive mechanism to it. It worked fine until the motor died, and to make matters worse I lost the motor pinion. I sourced a replacement pinion, which needed work to get its bore to the required diameter. and replaced the motor with a modern 21,000 rpm slot car motor. In order to fit it, I glue the old motor stator housing sides to the new motor with a small block of wood at the back, and then epoxied the unit in place.
The pickup arrangement is the same as on your model, but I think the wheels are plated steel ones. It runs really well, even at low speeds, although it can lose its wagons as the rear coupler is not centering properly.
I have also replaced the bulb at the front of the loco with an LED, which is controlled by a small circuit board that gives it a constant current regardless of the supply voltage. A small bridge rectifier in the circuit means the light operates regardless of whether the loco is moving in the forwards or reverse direction.
Despite all of the issues I have had with it, it is running reliably, and I am happy with its performance on my small oval layout.
As others have said, this is a very old design. I had one in the 60s, as a young teenager. Why did I have it, because I did not have much money, and it was very cheep, both in price and quality. It did run though for many years. The mechanism is the same, as well as the ozone smell. At some point they added the LED, after my time. I later found out that in addition to all the above, the body is actually closer to S scale, than HO. It always loomed over my other locomotives. Mine was the skirtless version with slide in frames/bearing sides.
i have a few of those but wheel sets are metal not brass and the horn is metal and they run great even after sitting for a while.
Thanks for sharing Jeff - I reckon this one was made on the cheap!
Thanks for watching - Sam :)
What a piece of tat! This makes the hornby beatles train pack look like a premium train set! Awesome video sam, I always look forward to your amazing videos!🎉🎉
I love the smell of ozone and machine oil in the morning.
And urine.
I had one of these from about 30 years ago and there was not much difference. The 30 year old version had silver wheels, horn hook couplers (The one on the back of yours was not broken. They always skewed to one side due to the molded plastic retention spring.), a cheap motor, no headlights, but both axels were driven. Also, I think it only cost about $25 when it was purchased new. It was little more than a toy and not meant for a serious modeler in any way. I remember seeing them packed into a “my first trainset” type of box (loco, 2-3 rail cars, a circle of sectional track, and the cheapest power transformer ever produced.) Never ran it much but I do remember what did it in. One of the plastic axels snapped during one of the few times I did run it. Truthfully, it was no major loss.
Oh wow, seriously old school stuff,lol. I had around six of those. sadly the motors didn't last very long and i ended up re-motoring them. I've seen these for sale at train shows for $10 U.S. .
I had one in HO before I sold it. I think it was under the Santa Fe livery. Don't remember much about it except I got it at, and sold it at a train show. Never ran it, as I only had it for 2 weeks.
After careful consideration Sam, I think what you reviewed here was a "MUTT" (AKA) "Frankenstein" because it don't look like any particular locomotive manufacture's bodywork unless it was made with spare-parts from all manufactures like EMD "the hood", GE "grill work", ALCO chassis, Fairbanks "Operators Cab".