Painting Chinese forces for Bolt Action - How I Paint Things
Вставка
- Опубліковано 1 лип 2024
- The Chinese involvement in WWII would mark a temporary lull in the fighting between Nationalist and Communist forces vying for supremacy over a unified China, with both sides forming the Unified Front against Japanese aggression. It wouldn't last long! READ MORE:
00:00 - Intro
01:41 - The Painting
11:38 - The Finished Product
Pick up the digital 'Empires in Flames' campaign book for Bolt Action to field your own Nationalist, Communist or Warlord Chinese forces in-game: bit.ly/2UhoISB
Visit anzio-miniatures.com/en/ to check out the complete range of Chinese miniatures available, suitable for WWII and the latter stages of the Chinese Civil War.
One of the Osprey books mentioned: ospreypublishing.com/the-chin...
Concerning uniforms during WWII: From the opening stages of the Sino-Japanese War there were two main types of uniform issued, a summer and a padded winter variant. Those troops stationed and provisioned in the northern regions would be issued a blue-grey cotton uniform (think Army Painter Wolf Grey or Citadel Russ Grey) which would commonly fade to a light grey with use (just about any grey you can think of works, here!). Troops to the south were issued with a uniform of the same cut said to be a khaki drill colour (Iraqi Sand, Green Ochre or similar), but examples exist of pale brown (Brown Sand) or even a slightly green shade (Green Grey) which would also fade to lighter versions of themselves. So, in short... pick a grey or beige and go nuts, it'll probably be close enough!
Due to the varied means that weaponry and equipment had been imported to China over almost four decades of constant conflict, an eclectic mix of weaponry from almost every nation was available in some point. The main battle tank of the Chinese Nationalist forces was the venerable Russian T-26, though those Chinese soldiers that fought as part of X/Y Force under British and American cooperation to relieve Burma and India were also issued a small number of Sherman and Stuart tanks. The most common helmet available was the M35 German stahlhelm, though with around 250,000 of these imported into China for an army numbering over four million, by far the most common sight was a soldier charging into battle with a cloth cap and little else!
Thanks to Producer level Patrons Alan Nuttall, Kyrie Crawford, Trainboy, Fred, and Jimmy - as well as all the other Patrons that made this video possible, and Exit23 Games for recording equipment that helps keep the channel ticking over! Find out more at the following links:
/ sonicsledgehammer
/ sonicsledge
/ sonicsledgehammer
exit23.games
If you like what I'm doing and you'd like to chip in without signing up for Patreon, why not a Ko-Fi? How I Paint Things will never be behind a pay wall, but anything dropped in the tip jar is greatly appreciated and really helps.
ko-fi.com/docwholigan
PAINTS USED:
PRIMER:
The Army Painter Skeleton Bone
VALLEJO:
Green Ochre
Dark Sand
Saddle Brown
Beige Brown
Off-White
Black
Oily Steel
Pale Sand
CITADEL:
Cadian Fleshtone
Kislev Flesh
THE ARMY PAINTER:
Skeleton Bone
Banshee Brown
Khaki Webbing
Strong Tone
Quickshade Mixing Medium
SPRAY VARNISHES:
Munitorum Varnish - Ігри
Great video . Totally agree, the Chinese theatre of war during WW2 is really under explored. The army on the tabletop is also really diverse and it's a dream for kitbashers because of all the different gear you can draw upon.
They're a neat choice if you're into the weird, early war kit that didn't see a lot of use in other armies, too. I've got a T-26 I'm looking forward to painting up - something I'd never have wanted if I was looking to go up against a Pz IV or similar!
Thank you ,Sonic .
The Chinese Army in WW2 were always an interesting subject to me and I am glad to see you did a miniature of a soldier of that period. Thanks for sharing this very interesting tutorial.
Now that was something I never thought of, the Chinese WW2 experience. Cool mini! Thanks again for sharing! 😀👍
It's a really interesting area of WWII that took me a long time to actually get around to investigating, and what a long story it is! The end of the civil war in 1949 marks almost forty years straight of constant conflict in China, from the initial revolution overthrowing the Imperial dynasty, the Warlord period, then the Japanese invasion of Manchuria... It's nuts just how long things went on for the average Chinese infantryman. The Chinese joining the Allies meant a hell of a lot of Japanese soldiers wouldn't end up fighting in the Pacific, which is good news for the Marines!
Remember when you were talking about adding History chats in with your painting videos? This is an excellent example of why you should do it. Not only did I get a painting lesson, but a history lesson. And maybe that will lead to me painting uncommon figures from other eras/armies. It’s win/win/win! Thanks again and Cheers 🍻
Lot of great episodes coming out lately. Glad spinney thing is back with us. I was getting concerned.
Cheers, Josh! I think I've found my workflow and really gotten into the swing of things. Glad to see someone else is excited for the return of the spinny thing! :D
Great episode. I really like when you get into the weeds about where you get the historical sources for your colors. I admit that I'm not as picky when I'm choosing between two different shades of green or brown, but I love to hear you talk about your process.
It's pretty crazy how far it's possible to go sometimes in search of the 'right' colours, even when it's a fairly broad range of possibilities! I like to at least be in the realm of Hollywood accurate, for the most part. I figure reenactors are a safe bet there!
Really enjoyed this, great tutorial!
Glad you enjoyed it!
Nice tutorial, I do like when it's historicaly informed ! Thank you Sonic !
My pleasure! I do like these outliers on occasion. :D
Great job as always 👍
You should read a book written by Barbara Tuhmann's Stilwell and the American Experience in China, 1911-45. That should give you some interesting scenarios for using Chinese Nationalist and Communist troops in WWII. Also, it will put things into perspective with respect to the difficulties with Chiang Kai-Shek. The Chinese troops were actually quite proficient when well led and equipped. Great job on the minis...they look great!!
It's been interesting so far reading about how things might have gone differently if Chiang hadn't been so thoroughly committed to trying to crush the Communists BEFORE dealing with the Japanese invasion of the country... some united front, right? I've gotten a few insights on the performance of the German-trained units early in the war, as well as X and Y Force; the Chinese soldier was more than capable of giving as well as he got when properly led with the right gear, it seems. Thanks for the recommendation, I'll definitely need to check that one out.
Excellent video! And definitely a very special how I paint things.
Will you be looking at any thing for the Korean War? Love that cup in the background!
The trouble with the Korean war is that for the most part, the uniforms aren't much changed from the end of WWII. There's a couple things like the British change in battledress for the period I'd like to cover at some point, but it's a very 'in the future at some point' kind of thing, unfortunately.
@@SonicSledgehammerStudio definitely understand… was sure about the U.S. Forces, pretty sure about British… I guess that Chinese would be similar to what you did in this video. I’ve got the Korean War book need to take a closer look at it. 😊
Thanks for another great episode!
thank you what a great topic😀
Not one you see often on UA-cam, I'd wager! 😂
Great work, well done! 👍
Amazing work.... beautiful ❤️❤️🎨🎨
Thank you! Cheers!
Great tutorial and thanks for pointing me in the direction of Anzio Miniatures to buy the figures.
Glad I could help! They're nice little casts, really.
Amazing work as always Sonic! After the white painting fiasco a week or two back I settled on painting my primaris as standard, more beginner friendly untramarines, with red boltgun casings! Haha. But from all of this I decided I dont want to play such a... overly represented army (my local shop players groaned when I came in with em') and so have settled on the adeptus custodes as my next army propper. How do you think your last video on the storm cast would apply to such detailed miniatures? Its bang on a close match for the lockwardens shield-host if I'm correct!
If anyone's giving you guff for playing Ultramarines, it's them that needs the attitude adjustment rather than you. Sure, they're common, but so are German armies in Bolt Action and nobody blinks. It drives me spare people rolling their eyes at one another's army choices - unless it's Chaos, because they're bad and naughty. 😉
Where Custodians are concerned, I'm pretty sure most of the Stormcast colour schemes and techniques should transfer over to them fairly well. The Hammers of Sigmar gold armour look in particular is almost 1:1 for the Custodes, just swap the Macragge Blue for Mephiston Red and you'll be golden - literally as well as figuratively!
Unexpected and cool. 👍
(All Hail the Algorithm!)
I like to come out of left field occasionally! ;D
Have you seen any of the trailers for the movie “The Eight Hundred”. Looks good.
Oh, neat! I hadn't realised it'd come out with subtitles. All I could find on it originally was a French dubbed version for international release. Off to go find that, now!
That is really nice, thank you! :)
Glad you like it!
@@SonicSledgehammerStudio You'll get me to buy a bolt action starter kit eventually. :D
Those starter armies do make some rather good 1000pt forces, honestly... ;D I'm partial to the US Army one for the range of troops and support choices in there, but you can't go wrong with any.
the guy you just spoke with on twitter
Ahoy! ✌
@@SonicSledgehammerStudio o7
Every cool, I did not even know Warlords games had Chinese troops
Warlord includes the rules for China in Bolt Action, but these miniatures are actually from Anzio Miniatures over here: anzio-miniatures.com/en/
@@SonicSledgehammerStudio Thanks, I'll check them out
Will "How I Paint Things" from Fallout: Wasteland Warfare appear?
'Eventually' is the short answer. I don't really play the game myself, so getting hold of the miniatures can be a challenge.
@@SonicSledgehammerStudio ok, thank you for reply
The Chinese communist troops that defeated the Chinese nationalists, eventually ended up fighting the UN in Korea.
The revolution, civil war, brief pause for WWII, continued civil war... it's a long period to cover, but seriously interesting times.
I watched this to see how you tackled the skin tone from that area of the world and you made no effort to address it and went down the lazy path of just using the bog standard GW skin range.
I've also done two videos previously on varied skin tones and how to paint those. At this scale, there's very little difference in what you'd actually see, but if you need specifics there's: ua-cam.com/video/3mYCLwrI1fg/v-deo.html and ua-cam.com/video/eqgPAKH_jy8/v-deo.html
Past a point it's the uniform which is the more important part of the miniature, at least from the perspective of a video on the subject rather than repeating stuff I've already covered.
@@SonicSledgehammerStudio ok i will watch those other videos, a lot of people say that because the miniatures are so small on a tabletop that you can't see any difference in skin colour and tone but then spend hours making sure they get the correct colour and shade on a tiny pouch.
Different strokes for different folks, I guess! I tend to play fairly loose with accuracy on most of my stuff, as long as it's in the right ballpark people can tweak as they need. With comparative skin tones it's difficult because you also don't want to look someone to look cartoonish instead. I'm quite looking forward to the Army Painter Skin Tone Paint Set, myself. That ought to make some choices far easier!