I found Raximo handle bars, I’ll take a look at it. My problem is, my arms are too “short” when I make a turn. So I need a handle bar coming more towards me than the oem handlebar. Maybe I look for handlebar risers with a little bent.
Then the ones in the link are not gonna fit you. They have even less bent than OEM ones. Have you tried to bend/turn yours down towards you more? There are risers with the offset like one up and one back or similar that should help you, but be careful, cause that could bring it way too close to you for standing up position. Good luck!
Loooks like a very worthwhile detour for me next year, then I could use Mt Olympus a a tripod to take photo's and video with my Olympus camera 😉. Ride safe Nemo 🤗
Hi Nemo, nice ride in Greece. Btw in which details your steering bar differs from the oem steering bar? And who is the maker/brand of your “golden” steering bar?
Thank you! The handlebars are made by Raximo. I will try to put the link. They are quite different from the OEM ones. A little bit straighter with a little bit less bend in them. But they are thicker towards the inside, if that makes any sense, which makes the inner holes narrower and you would need different inner bolts if you wanna retrofit Barkbusters or even OEM plastic handguards, which could be ordered from Barkbusters, or even from the same website I put the link in here. Another thing- they are not predrilled so that will need to be done with precision. I will add the link with a separate answer, just in case UA-cam hides this answer. Please let me know if you can see it in the answer below?
Hi, no one has yet :) If you gonna do it please send it on my Instagram and comment with a new comment that you did it. Please do not reply to this one, but make a new comment :) And make the picture so I know you were there, and it's not a picture from my video 😄😄😄
Thanx for your advice.👍🏻 Have fun with your future trips.
I found Raximo handle bars, I’ll take a look at it. My problem is, my arms are too “short” when I make a turn. So I need a handle bar coming more towards me than the oem handlebar. Maybe I look for handlebar risers with a little bent.
Then the ones in the link are not gonna fit you. They have even less bent than OEM ones. Have you tried to bend/turn yours down towards you more? There are risers with the offset like one up and one back or similar that should help you, but be careful, cause that could bring it way too close to you for standing up position. Good luck!
Labas.Beprotiškai gražus kalnas. Taip ir toliau.
Sveikas, Dėkui!
That was a nice trip, Nemo. Thanks you share it with us!
@@Kostas_Theologos Thank you for watching 🤜🤛👌
Loooks like a very worthwhile detour for me next year, then I could use Mt Olympus a a tripod to take photo's and video with my Olympus camera 😉. Ride safe Nemo 🤗
That sounds like a lot of Olympus :D :D It is an awesome road to ride! Thanks and have fun next year!
Dammit, I was near Olympus last week, should have rented an enduro and catch up with you :). Great video as always!
Much Enjoyment 👍😎
Thank you again! Cheers
Great video again. Thank you.
Thanks for watching, Cheers from Norway!
❤
Super Preitais metais su masina pravaziavau siuo keliuku,bei ikopiau i mytika,jis visai salia nuo trobeliu randasi.Butinai dar grysiu kada❤❤❤
Su mašina ten turėtų būt tikrai visai ekstremalus važiavimas. Kokiu automobiliu važiavot? Visai norėčiau ior aš tą padaryti :)
@@nemoltu nisan terrano🚔
Hi Nemo, I’ve got your message. Thanx
Good, check the Flexbars from the USA I think that is what I will put for next season. Pricey, but looks very interesting.
Hi Nemo, nice ride in Greece. Btw in which details your steering bar differs from the oem steering bar? And who is the maker/brand of your “golden” steering bar?
Thank you! The handlebars are made by Raximo. I will try to put the link. They are quite different from the OEM ones. A little bit straighter with a little bit less bend in them. But they are thicker towards the inside, if that makes any sense, which makes the inner holes narrower and you would need different inner bolts if you wanna retrofit Barkbusters or even OEM plastic handguards, which could be ordered from Barkbusters, or even from the same website I put the link in here. Another thing- they are not predrilled so that will need to be done with precision.
I will add the link with a separate answer, just in case UA-cam hides this answer. Please let me know if you can see it in the answer below?
The link- mtp-racing.com/Alloy-Handlebar-New-Generation-286mm-tapered-Raximo-TUeV-approved-RA21097-006
Bleet,as pro tuos bulius taip drasiai nevaziuociau😀😀😀
😂😂😂 Dabar ir aš jau taip drąsiai nevažiuočiau :D
@@nemoltu 🤣
All greek people knows it.
I assume so, but how can we travelers know that? It is such a fun road to ride, and I was told that tourists don't know it.
did anyone send you a picture of the sticker? if not im en route xD
Hi, no one has yet :) If you gonna do it please send it on my Instagram and comment with a new comment that you did it. Please do not reply to this one, but make a new comment :) And make the picture so I know you were there, and it's not a picture from my video 😄😄😄