Uni-T UT181A Review
Вставка
- Опубліковано 5 лип 2024
- This is a review of the Uni-T UT181A multimeter for use in hobby electronics projects primarily related to amateur radio.
A pdf document of this review: github.com/TomWilkinson/Multi...
This review was produced to help you decide if the Uni-T UT181A multimeter will fit your purpose and budget. This is part of a series of multimeters reviews.
A good multimeter for hobby electronic projects should be able to measure millivolts, volts, microamps, milliamps, amps, ohms, nanofarads and microfarads.
If you want to measure picofarads, nanohenry, microhenry or reactance you will need a LCR meters. I cover the two LCR meters I own in another review.
I am not a professional, I am a hobbyist. This review is not sponsored; I bought this multimeter with my own money. I only used and tested this multimeter in CAT I and CAT II environments. I do not have a way to review or test the safety of this meter. I leave the CAT III and CAT IV environments to trained and licensed professionals. It may seem like I am a Fluke fan boy, but I recognize their flaws along with their advantages. There may be unintended mistakes and/or errors in this review. - Наука та технологія
Thanks Tom. I have the same meter and love it.
I thought I saw a HZ setting for frequency. I"d like a multimeter that could do that as well. What I'd also like to see, is an oscilloscope review. I'll have to check your channel to see if you've done one yet. This fall, I scrapped a lot of my hobbies and want to get in to Arduino programming.
Great video.
Hi, this was a very interesting review, in your opinion, which Fluke multimeter compare in performance vs this Uni-T, and which of the two would you recommend to buy? cheers
Hi...this Uni-t 181 is also a 60,000 count meter.
Great review! Just nitpicking here, but would be great to see how it does with the included leads.
Sorry, I don't have the leads any more. Once I decided I was keeping this meter I bought a set of Probmaster leads and sold the original leads at a local hamfest. I think that a high accuracy meter at this price point is best used with gold plated leads.
Very similar to my UNI-T UT8804N, which is basically the benchtop version of this handheld meter.
Hello to everyone,
I bought this multimeter and I have a question for UT181A owners when it is fully charged what message do you have on the display? It happens to me that I have a message charging 80% then 85% then 100% and it flashes like that. When I take out the charging adapter, the charging indicator icon seems to be not completely white. Does the same thing happen to you?
How long does a battery charge last in hours or so? and how long does it take to charge it afterwards?
"I AM GOING TO KEEP THIS METER AND SELL THE FLUKE" Whoaaaaaaaa......
Does this have an Auto Hold function?
شكرا على الفيديو
هل من الممكن مقارنة(Prova TES 903 vs Keysight u1282a vs Chauvin mtx3293 vs hioki dt4282) وشكرا
Sorry, I don't have any of the four meters you mentioned and I am done buying meters for now.
They probably used this means of charging because if they have a charging method while the meter is in use they probably can't get the safety rating.
What I don't like about this meter is the proprietary battery. A meter in this priceclass is ment to be used for decades, not a few years. Li-ion batteries dont have eternal life. What about the availability of this batterypack with specific connector in 5 or 10 or 15 years?
This is exactly why I dont like this meter,. Its great otherwise.
@@guateque1718If they just used 2 18650 cells, the availabilityproblem would have been solved (I assume that the 18650 cell is here to stay)
DEFF I GOT BOUT 20 18650S , flashlights vapes, rc controler, even a drone flies like 12 min on 1 cell😂
This one is the Fluke 289 killer!
i guess fluke is still best solution for productions
Thanks for review is this meter in diode test forward give alitile beeps?
No, this meter does not beep on good diode forward voltage.
Yes, it emits in diode mode, goes to the alarm menu, I tested it with mine and it works fine 👍
Is this a fluke 289 in a different dress? 😮
Fluke as always have terrible LCD display with ghosting on it. Also Fluke 289 is too slow in graph mode, UT 181A is way ahead in graphics speed at any measurements.
How long does the battery charge last?
До пів року ще тримає заряд а потім є проблеми з зарядкою і акумулятором!
Could probably mod it to add a separate charging port?
It is made of a reason this way. It guarentees you cannot plug meassure leads on charging. The reason is, if you put the probe leads in and try to measure voltage on your outlet, it might zipp you our of your shoes. Because of this the shown data cable is optical coupled. Without all this it won't hit his CAT rating.
So it is potentially very risky to made such a modification.
@@matthiash.4670 good point. Add a qi wireless charging coil then 😀
@@mc_cpu applying a very very strong EMR field to a precision measuring instrument while in use might not be that sensible....it'll for sure affect some of the readings.
The battery life on mine started acting weird after few months. It was draining fast, despite the device was off. When I took the battery out, it wasn’t draining. So there was something using the battery to finish it off in one day.
No selection of mode or resetting the device changed the battery drain for when the device was turned off. I ended up creating a manual switch to the battery with the help of dremel. Such an expensive device and unreliable power scheme with a weird rechargeable battery solution. I ended up not trusting the device anymore.
Where is the link to this meter ?
I am having trouble with GitHub links so I am trying OneDrive shared links. Try this OneDrive link: 1drv.ms/b/s!ArY0uP2JPdTZhpompKCr1-6_HvBwSg?e=Luq3gQ
Looks like a knockoff Fluke 289.
So it aint battery friendly..the display takes care of that🙄😒
nice review - good work! 73 de DL1LEP