The BMS disables the battery when it is removed from the scooter. To properly measure the battery voltage you need to bridge the middle blade contact (marked with the letter A) on the battery with the positive terminal. This will activate the battery and you can measure the voltage.
I got the X7 and just got it today, I was super excited and then said to charge for 6 hrs minimum when back and I have the same problems was looking forward to it to but I’m going to call them up on Monday see if I can do anything
Hey guys anyone know where I can pick up a spare battery for this scooter? I have the round connection or the old one as they call it. Turboant say there not making them anymore. Meanwhile I got a dead battery 😢please please can someone help
I have two batteries, one working and one not. I tried measuring the voltage on the two batteries, but it didn't give me any results. You have to connect the middle line to the positive line then you can measure. Although it gives me a correct value, the battery is not working😢
use this formula...its my experience first check the battery how much Volt has before BMS which means battery - and +..then if it shows you there is no dead battery it will be more than 36V then use the above Method"i did it on my HX8 scooter I took negative from battery and give to output negative.THEN BMS OUTPUT gave me 42V at output."
@@Tefelucky me avisas como te va hermano , compré una batería " muerta " pero solo era eso , la abrí y hice el puente en los negativos del bms , ahora esa batería la uso en mi ninebot es2 jejeje
I feel like I have the same problem with my X7 Max. So my scooter can go, but will not accelerate above 8mph. I’m really hoping it’s just the battery. It would suck to return the whole thing. If they don’t fix it, I think I’ll just get the Hiboy S2 pro or the Varla Pegasus
Stay away from Hiboy. Not reliable and bad quality. Save up for a Etwow or Unagi. They're more expensive, but you're paying for superior quality and reliability.
You all realize there’s several modes right? You have to put it into the mode where it goes 20 mph. I recommend looking up how to switch it into the mode where it goes 20 mph. I’ve had no problems at all. Not yet at the very least and I’ve had it for a good time.
@@Real_UnholySins yeah I was aware of the different modes and I did switch it to red where it's supposed to go 20mph but it was still only going 8mph. I already returned the X7 Max.
@@alliethegreat0924 That’s super Odd. If igbh Any electric scooter you buy even from the most reputable and well known brands can be a gamble and sometimes this happens. I myself have had no issues with this and is an awesome scooter but I do hope you’re getting a new e scooter that is to your liking.
Acabo de comprar hace dos días ese scooter con ese mismo problema, y lo que hice fue abrir la batería y hacer un puente del negativo de la parte inferior hacia el negativo soldado casi a 10 cm de ese mismo punto, ahora sí vota los 42 V el tema es que lo probé y seguía sin funcionar pero es porque tiene más problemas ese scooter xD estaré actualizando mañana la información . Habían cables del motor que estaban partidos ojalá sea solo eso, pero ya voy haciendo los descartes necesarios
The BMS disables the battery when it is removed from the scooter. To properly measure the battery voltage you need to bridge the middle blade contact (marked with the letter A) on the battery with the positive terminal. This will activate the battery and you can measure the voltage.
Thanks
I got the X7 and just got it today, I was super excited and then said to charge for 6 hrs minimum when back and I have the same problems was looking forward to it to but I’m going to call them up on Monday see if I can do anything
Hey guys anyone know where I can pick up a spare battery for this scooter? I have the round connection or the old one as they call it. Turboant say there not making them anymore. Meanwhile I got a dead battery 😢please please can someone help
There is a place in California u can mail ur old battery to and they can install new cells in your battery
@@ronniematthews3408 What a wicked idea I love it. Shame they don't here in the UK
@ronniematthews3408 where the address for that place
Thats a BMS or fuse issie not cell, reset the BMS or replace it
I have two batteries, one working and one not. I tried measuring the voltage on the two batteries, but it didn't give me any results. You have to connect the middle line to the positive line then you can measure. Although it gives me a correct value, the battery is not working😢
use this formula...its my experience first check the battery how much Volt has before BMS which means battery - and +..then if it shows you there is no dead battery it will be more than 36V then use the above Method"i did it on my HX8 scooter I took negative from battery and give to output negative.THEN BMS OUTPUT gave me 42V at output."
Open The battery and sold negative extreme with central negative bridge negatives and plash 42 V output . Eso fue lo que hice xDD
Thanks brooooo
@@Tefelucky me avisas como te va hermano , compré una batería " muerta " pero solo era eso , la abrí y hice el puente en los negativos del bms , ahora esa batería la uso en mi ninebot es2 jejeje
@@Btrashtein i did it on my HX8 scooter I took negative from battery and give to output negative from BMS then there it is 42V at output.
Soldar el negativo con el negativo central?
You are not testing the battery correctly, you need to bridge positive and the center hole then do the test
I feel like I have the same problem with my X7 Max. So my scooter can go, but will not accelerate above 8mph. I’m really hoping it’s just the battery. It would suck to return the whole thing. If they don’t fix it, I think I’ll just get the Hiboy S2 pro or the Varla Pegasus
Stay away from Hiboy. Not reliable and bad quality. Save up for a Etwow or Unagi. They're more expensive, but you're paying for superior quality and reliability.
You all realize there’s several modes right?
You have to put it into the mode where it goes 20 mph.
I recommend looking up how to switch it into the mode where it goes 20 mph.
I’ve had no problems at all.
Not yet at the very least and I’ve had it for a good time.
@@Real_UnholySins yeah I was aware of the different modes and I did switch it to red where it's supposed to go 20mph but it was still only going 8mph. I already returned the X7 Max.
@@alliethegreat0924 That’s super Odd.
If igbh Any electric scooter you buy even from the most reputable and well known brands can be a gamble and sometimes this happens.
I myself have had no issues with this and is an awesome scooter but I do hope you’re getting a new e scooter that is to your liking.
That sucks i just got mine and on 3rd mode it goes 20 mph. You probably had lemon.
Thats way its sale because this brand is not durable for a long use
Can someone do a video please on the fix I’m a bit lost
My M 10 isn't charging
What's the solution?
It has bad cells and the pack has to be replaced in most cases
Acabo de comprar hace dos días ese scooter con ese mismo problema, y lo que hice fue abrir la batería y hacer un puente del negativo de la parte inferior hacia el negativo soldado casi a 10 cm de ese mismo punto, ahora sí vota los 42 V el tema es que lo probé y seguía sin funcionar pero es porque tiene más problemas ese scooter xD estaré actualizando mañana la información . Habían cables del motor que estaban partidos ojalá sea solo eso, pero ya voy haciendo los descartes necesarios
@@BtrashteinCan you email me pictures of exactly how you soldered the Jump. Does the scooter work. What other problems does the X7 Model have.
@@AzraelPercussionNEO si normal pásame tu correo ✉️✉️
@@AzraelPercussionNEO justo antes de ayer compré uno que gane en una subasta y tenía el mismo problema , y ayer lo abrí e hice un vídeo 👍🤗