Uphill Resistance: Ztto 8-Speed 11-46T Cassette

Поділитися
Вставка
  • Опубліковано 29 лис 2024

КОМЕНТАРІ • 224

  • @FixTechStuff
    @FixTechStuff Рік тому +3

    Great stuff. I ordered a 11-46 cassette today and realised from your video I will need a hanger extension too. Thanks!

  • @HB-yq8gy
    @HB-yq8gy 2 роки тому +3

    Thank you so much! All I needed was a hanger extension. I tried the P screw tension that didn't work. I just finish my Trek 4500 Bafang 750w 48v-10ah upgraded to a11-40T from an 11-32T.

    • @tmayberry7559
      @tmayberry7559 Рік тому

      My lbs couldn't get my 8 speed 11 x 40 to fit onto a 8 speed free hub body . So I had to go with 11 x 32

  • @kangmi26
    @kangmi26 3 роки тому +4

    Going back in this channel after looking another insight.. Nice content 👍👍👍

  • @gwynnjason
    @gwynnjason 3 роки тому +18

    i prefer builds like this, considering the number of teeth not the number of gears. as a 11 and 12 speed user, i encounter alot of problems including faster wearing of parts than 8 speed.

    • @DanyoSports
      @DanyoSports  3 роки тому +2

      Well said.

    • @krinkedsurface
      @krinkedsurface 2 роки тому +3

      Plus it takes more time and work to go from gear 1 to 11

    • @weesamexpress6730
      @weesamexpress6730 Рік тому

      I plan to build my race mtb the same way too, just a simple 1x8 drivetrain for durability and so it can still fit the larger chains for the 7 and 8 speed bikes

  • @javeilagan9540
    @javeilagan9540 3 роки тому +7

    Thanks for this idea. It will save me lot of money 👌💪 yeah boy!

  • @diyboyy9303
    @diyboyy9303 3 роки тому +3

    Looking forward to this just ordered mine

  • @joshualapurga3431
    @joshualapurga3431 10 місяців тому +1

    I think tuning this setup is pretty difficult. My RD is capable to handle UpTo 50T.
    I alway end up having shifting issue in the middle but when i twist the barrel adjuster the chain wont go to smallest and largest gear

  • @coolride88
    @coolride88 10 місяців тому

    Trek Marlin 4 has the Rear hub Formula DC31, it will be good if there is a 8 speed 11-42T freewheel available for 1X8 conversion, I cannot find any 8 speed 11-42T freewheel to suit the Rear hub Formula DC31

  • @portioliluca
    @portioliluca 2 роки тому +1

    But isn't there too much pedaling difference between each shift? does the chain go well from the small to the large sprocket?

    But isn't there too much pedaling difference between each shift? does the chain go well from the small to the large sprocket?

  • @pedallinraw
    @pedallinraw 4 роки тому +8

    Best upgrade anyone can make to their bike mtb or road 🙂👌🏻

    • @johnjoestar5111
      @johnjoestar5111 3 роки тому +1

      Noob question: Can i use this on my claris 2400(roadbike)?

    • @mundaneer7860
      @mundaneer7860 3 роки тому

      How was your climbing experience with the 1x8 setup?

    • @declan4245
      @declan4245 3 роки тому +1

      You wouldn’t need this on a road bike as you have gears in the front

    • @miroalavcernin1542
      @miroalavcernin1542 2 роки тому

      Smaller chainring will save more grams and make chain wear out less quickly.

    • @miroalavcernin1542
      @miroalavcernin1542 2 роки тому

      @@johnjoestar5111 it depends on you cage size. SS Short cage Claris can only take up to 34 teeth cassette. Dont know if goatlink can be used on road RDs.

  • @INTEL965GAMES
    @INTEL965GAMES 4 роки тому

    I plan to buy it....But I don't if I will need to replace the chain.........Current setup is 3x8.....Cassette is Shimano 32 teeth I think........And SRAM X4 I think is medium cage......

  • @stevebennett3587
    @stevebennett3587 3 роки тому +1

    👍great tutorial, never tried ZTTO cassettes, I've been using sunrace, would you reccomend it for durability and smooth gear changes?

    • @DanyoSports
      @DanyoSports  3 роки тому +4

      Thanks, the durability is great but I would get a 10 or 11 speed version if you are looking for smooth gears changes. Everything works great and I’m happy with it.

  • @rIP2693.
    @rIP2693. 2 роки тому

    I brought Ztto 8speed cassette 11-40T about 6 months ago, I love the cassette it work nice. But, I found an issue with this cassette lock ring. The inner thread inside the lock ring is faded now which makes my cassette getting loose on the freehub after using some days. Does Ztto cassette lock ring are all having this issue?

  • @richarde1355
    @richarde1355 2 роки тому +1

    What grip shifters are you using with that XT derailleur? That's awesome you were able to get that XT to work; per the specs, that 46 cog is way out of its range. Nice going!

    • @DanyoSports
      @DanyoSports  2 роки тому +1

      I’m using the SRAM MRX Comp grip sfifters designed for Shimano derailleurs.

    • @richarde1355
      @richarde1355 2 роки тому +1

      @@DanyoSports thank you! I have grip shifters on a vintage Cannondale, and I really like them. Way underrecognized shifter.

    • @BrianRPaterson
      @BrianRPaterson 2 роки тому

      ​@@richarde1355 Me too. I have a set of old Sachs twist shifter on a very old 8-speed xt derailleur on my Cannondale CS800 crosser. But my block is only 11-32.
      I'm hoping to swap to an 11-42, with a hanger extension.
      I had that setup running on an old Yeti 575 and it seemed to do the job.

  • @ernestodelapenajrjhunjhun8608
    @ernestodelapenajrjhunjhun8608 2 роки тому

    But how ever you install 11-46 on 8s but it happen the RD is spread to much.

  • @luqman9774
    @luqman9774 2 роки тому +1

    I have a question... I have an 8 speed 11-40t cassette and a shimano altus m310 RD with extension. I can reach the largest cog no problem. However, the shifting is not smooth and is a bit clunky. When i do the indexing, it either shifts well at the large cogs and badly at the smaller cogs or vise versa. I can't get it to shift well for every cog. Its really frustrating. Do you think that if i change the RD it will fix this problem!? Thank you in advance sir.

    • @DanyoSports
      @DanyoSports  2 роки тому +1

      Yes, check your derailleur actuation ratio, it might not match with your shifter.

  • @pavelorlov9676
    @pavelorlov9676 3 роки тому

    DanyoSports Hello, how are the speed switched in comparison with the seven-speed cassette? How should the switching of speed switching? How is the cleaner and accuracy of speed switching? The chain does not fall on this CTST cassette? With this czetse ZTTO 11-46 the bicycle did not become noiser? Transfers are switched off without difficulties compared to the seven-speed cassette?

    • @DanyoSports
      @DanyoSports  3 роки тому

      Hi, the cassette is great and the shifting is acceptable, I haven’t had any problem with it, just make sure to get a nice long cage derailleur with it.

    • @dricuciuca
      @dricuciuca Рік тому

      ​@@DanyoSports I just mounted this 8s 11-46 cassette on my bike and change to chain to a bigger one. But I have an issue, The chain slipped on the smallest gears and makes a very loud noise. I need to change the derailleur, What will be a compatible model for this cassette? Or any important specifications that need to have? because I now have a short derailleur + hanger extension and does not work. I don`t know what to buy, please help.

  • @fairulm4184
    @fairulm4184 2 роки тому

    Hi Danyo.. I'm food delivery cyclist, 8 to 10hrs daily. Looking forward to change my deore 10 speed to this zitto 8 speed 46t. Less switching, better climbing. May I know the width of this zitto? Need spacers

    • @DanyoSports
      @DanyoSports  2 роки тому +2

      Hi, the width should be identical to the 10 speed so you don’t need spacers for that.

  • @edmtbtv5387
    @edmtbtv5387 3 роки тому

    Have the exact same cassette but can’t get them to the low gears, even with the hanger. My rear derailleur is shimano acera 8s 1x set up. Any help appreciated. Thanks in advance

    • @DanyoSports
      @DanyoSports  3 роки тому +1

      Shimano Acera won’t fit, many people are having issues with it, you need to get another derailleur like Shimano Deore XT.

    • @edmtbtv5387
      @edmtbtv5387 3 роки тому +1

      @@DanyoSports thanks buddy 👍🏽

    • @edmtbtv5387
      @edmtbtv5387 3 роки тому

      @@DanyoSports is there an 8 speed shimano deore xt? Any links appreciated

    • @DanyoSports
      @DanyoSports  3 роки тому +1

      This derailleur would fit on 8/9 speed: SHIMANO 771 DEORE XT 9 SPD Rear DERAILLEUR RDM771SGS www.amazon.ca/dp/B001EII3W4/ref=cm_sw_r_cp_api_glt_i_BT6VBXQ73YP404ZPXV87

    • @edmtbtv5387
      @edmtbtv5387 3 роки тому

      @@DanyoSports thanks man 🙏🏽

  • @moonpie6717
    @moonpie6717 2 роки тому

    bro, how many teeth are there on the star in front? Will I have enough of a 34T chain in front and an 11-46 cassette in the back?

    • @DanyoSports
      @DanyoSports  2 роки тому +1

      The front chain rings are 32T and 22T. 34T would work fine.

  • @MrAlfasul
    @MrAlfasul 3 роки тому +1

    hy,i ordered one for replace the sram xg899 a ( 485 euro yes there crazy ) for my haibike x duro - n duro 10.0 -- 2018 / 40 euro for the ztto one

    • @kr1sV
      @kr1sV 3 роки тому

      Hi
      And what is your opinion? I am thinking about installing this casette to the ex1 system

    • @MrAlfasul
      @MrAlfasul 3 роки тому +1

      @@kr1sV sold the bike for 1500 euro -new price 5800 euro

    • @kr1sV
      @kr1sV 3 роки тому

      @@MrAlfasul so you haven't tried the cassette from ztto?

    • @MrAlfasul
      @MrAlfasul 3 роки тому +1

      @@kr1sV SOLD THE BIKE AFTER 200 KM BECAUSE THE WEAR ON THE CHAIN iiii

    • @kr1sV
      @kr1sV 3 роки тому

      @@MrAlfasul im confused. did you change the cassette but did not change the new chain or you ride on xg899 and not instaled ztto 8 speed casette?

  • @wilhelmmahinay5376
    @wilhelmmahinay5376 Рік тому

    hi sir chain and rd what number of speed..?coz we are the same cogs..but its hard for my part to adjust..pls try to help..thanks.!

  • @Tommiunas
    @Tommiunas 3 роки тому

    Hello! One question: this is a Sram comp 3.0 right gripshitf? Is this gripshitf compatib with Xt Shimano ? Thanks! And super nice bike !

    • @DanyoSports
      @DanyoSports  3 роки тому +1

      Hi, no, you have to get the MRX Comp gripshift like mine because it’s the only one made to work with Shimano derailleurs (2:1 actuation ratio).
      Don’t get the 3.0 Comp, it’s made for SRAM derailleurs (1:1 actuation ratio).
      www.servicearchive.sram.com/sites/default/files/techdocs/mrx_shifters.pdf

  • @sepg5084
    @sepg5084 3 роки тому +1

    I have a 11t-40t ZTTO 9spd cassette, it has problems shifting to 5th cog whether it is coming from a higher or a lower gear :(

    • @DanyoSports
      @DanyoSports  3 роки тому

      Is your shifter 9-speed? Check your shifter and derailleur.

    • @rIP2693.
      @rIP2693. 2 роки тому

      SU W
      I brought Ztto 8speed cassette 11-40T about 6 months ago, I love the cassette it work nice. But, I found an issue with this cassette lock ring. The inner thread inside the lock ring is faded now which makes my cassette getting loose on the freehub after using some days. Does Ztto cassette lock ring are all having this issue?

  • @allendelavega1052
    @allendelavega1052 3 роки тому

    8s 11-46T cogs. Is this compatible to SRAM x4 rd? Without using goat link hanger extension?

    • @DanyoSports
      @DanyoSports  3 роки тому

      I don’t think so, you need the hanger extension.

  • @Kevin-og4dv
    @Kevin-og4dv 3 роки тому

    Hi danyo i just want to know what number of teeth did you use in your 1by set-up crank? I hope you notice me☹️ thank you for sharing this idea❤️

    • @DanyoSports
      @DanyoSports  3 роки тому +1

      Hi, the narrow wide chainring has 32 teeth.
      Narrow Wide Chainring: 1x8 Setup ua-cam.com/video/Ymxgr-TD1uA/v-deo.html

    • @Kevin-og4dv
      @Kevin-og4dv 3 роки тому

      Thanks danyo i already upgrade my casstte into 11 46t 8s and my chain ring is 36t and my rd didn't need the goatlink my rd is shimano tourney.

    • @kangmi26
      @kangmi26 3 роки тому

      @@Kevin-og4dv omg.. What code of that RD ? Can handle 46 smoothly ?

  • @JordanyDcris
    @JordanyDcris 3 роки тому +1

    Hello, which derailleur do you recommend for this cassette, microshift 8 speed 12-46 ?, help me. thanks you

    • @DanyoSports
      @DanyoSports  3 роки тому +1

      Hi, I’m using Shimano Deore XT and it works perfectly, I’m not sure about Microshift but I think it would fit as long as it is a long cage derailleur.

    • @JordanyDcris
      @JordanyDcris 3 роки тому +1

      @@DanyoSports thanks buddy in that case i will use a long cage derailleur with an extender, i hope work good.

    • @javeilagan9540
      @javeilagan9540 3 роки тому +1

      You can use shimano altus or acera but you need to use goat link.

  • @bondetwae
    @bondetwae 3 роки тому

    Nice video sir..

  • @noeltimario2675
    @noeltimario2675 3 роки тому

    Nice ride. WOuld like to ask, what's the size of your chain ring?

    • @DanyoSports
      @DanyoSports  3 роки тому

      Thanks, the size of the chainring is 32t.

    • @noeltimario2675
      @noeltimario2675 3 роки тому

      @@DanyoSports Interesting. how's your performance in flat road? what combination you used?

    • @DanyoSports
      @DanyoSports  3 роки тому

      The performance on flat road is great, the 11t cog suits me well for high speed riding. I converted to 1x8:
      Narrow Wide Chainring: 1x8 Setup
      ua-cam.com/video/Ymxgr-TD1uA/v-deo.html

  • @bossmikemtb
    @bossmikemtb 3 роки тому

    How about the Chain no need to add chain?

    • @DanyoSports
      @DanyoSports  3 роки тому

      Yes, I replaced it with a new and longer chain.

  • @MS-xk3ds
    @MS-xk3ds 2 роки тому

    Hi friend, please send me some link with recommended chain from Ali . Do I need 8 speed chain or better 10 speed or more for 11-46T ?

    • @DanyoSports
      @DanyoSports  2 роки тому +1

      Hi, you need 8 speed chains, look up KMC, I have them on most of my bikes and they are great.

    • @MS-xk3ds
      @MS-xk3ds 2 роки тому

      @@DanyoSports Thank you very much! Great video man 🙂

  • @aaronjustin3726
    @aaronjustin3726 3 роки тому

    Hey I run 3x8 setup with Shimano Alivio M3100 Rd will this work?

    • @DanyoSports
      @DanyoSports  3 роки тому +1

      Hi, I’m not sure if your derailleur will work with the cassette, mine is a Shimano Deore XT and it works pretty well.

  • @tanertatltug5336
    @tanertatltug5336 Рік тому

    Will it fit my 3x7 gear system in 8s 11-46 casette?

  • @Rondel0927
    @Rondel0927 3 роки тому

    Hi id like to upgrade my cassete 8speed 11-36t to 8speed 11-46t what i need to buy aside to the ztto 8speed 11-46t cassette? Pls help

    • @DanyoSports
      @DanyoSports  3 роки тому +1

      Hi, what derailleur do you have? You would need a long-cage derailleur and probably a new chain.

    • @snorttroll4379
      @snorttroll4379 Рік тому

      @@DanyoSports a longer chain or just a new one so they wear correctly?

  • @Honir4
    @Honir4 8 місяців тому +1

    is it any good? how long did it last?

    • @DanyoSports
      @DanyoSports  7 місяців тому

      I’m still using it as of today.

    • @Honir4
      @Honir4 7 місяців тому

      @@DanyoSports nice thanks

  • @samuelhernandez9875
    @samuelhernandez9875 4 роки тому

    Asta horita no sé a roto el descarilador con la vibración del 46

  • @ryanrussel2145
    @ryanrussel2145 3 роки тому

    hai please reply what is your front crank size. i have this cassett but didnt know what front crank to use tq

    • @DanyoSports
      @DanyoSports  3 роки тому +1

      Hi I’m currently on 32T narrow wide chainring: ua-cam.com/video/Ymxgr-TD1uA/v-deo.html

    • @ryanrussel2145
      @ryanrussel2145 3 роки тому +1

      tq sir

  • @hiimaj4615
    @hiimaj4615 3 роки тому

    Is it worth buying??

  • @miroalavcernin1542
    @miroalavcernin1542 2 роки тому

    Doing squats with full steel toolbox will make your uphill resistance even better.

  • @diyboyy9303
    @diyboyy9303 3 роки тому

    Brother i have a question. I just bought this 8 speed 11-46T however my rear derailleur is not compatible to it. Did you change your chain and RD for this?

    • @DanyoSports
      @DanyoSports  3 роки тому

      What’s not compatible? Is your chain long enough? My rear detailleur is a long cage Shimano Deore XT and I replaced my old chain with a new one.

    • @MyMegaJOKER2
      @MyMegaJOKER2 3 роки тому

      Do you have a rear derailleur hanger extender?

    • @DanyoSports
      @DanyoSports  3 роки тому

      Yes, I’m using the hanger extender.

    • @diyboyy9303
      @diyboyy9303 3 роки тому

      Mine was a shimano tourney. I think thats why. Im still looking for a better RD thats capable of 9 speed and will change the chain as well

  • @ivanpetrov2280
    @ivanpetrov2280 3 роки тому

    Is it good idea if you make the chain litle bit longer after this upgrade???

    • @DanyoSports
      @DanyoSports  3 роки тому

      Yes, you might need to extend the chain to shift to the 46t cog.

  • @walter_vdz8156
    @walter_vdz8156 3 роки тому

    Hey i just bought the 9 speed 11-46t version do i need a new chain my chain is 200km old and do i need totl extend the chain ?

    • @DanyoSports
      @DanyoSports  3 роки тому

      Hi, you could reuse the old chain, but you probably need to extend a few links because your cassette is bigger now.

    • @snorttroll4379
      @snorttroll4379 Рік тому

      @@DanyoSports isnt that a problem when you shift down to the smaller sprocket wheels?

  • @smizzy048
    @smizzy048 4 роки тому

    Nice video your channel is slowly growing

  • @brovashift
    @brovashift 4 роки тому

    Did this fit perfectly???
    I have just fitted one of these cassettes to my bike and it is slightly loose!
    I haven't setup the gearing yet but Im a bit comcerned its either going to slip or make a lot of rattling... or both.

    • @DanyoSports
      @DanyoSports  4 роки тому

      Yes, mine fits perfectly like other Shimano cassettes. Check your hub, did you tighten enough the lock ring?

    • @brovashift
      @brovashift 4 роки тому

      @@DanyoSports yes I made sure it was as tight as possible. I had another look before and noticed the actual 'cassette' (the piece on the spindle that the cogs slide on to) was moving. Is there a way to tighten that? Or will that affect the spindle e.g. stiffen up?
      I think my chinese set is maybe 0.5mm bigger than the old Shimano set I took off, so that must account for some of the movement.

    • @DanyoSports
      @DanyoSports  4 роки тому

      What kind of wheel do you have? It looks like the hub is loose.

    • @brovashift
      @brovashift 4 роки тому

      @@DanyoSports The Hub!!! Thats what I mean 😂... Ive been watching American UA-cam videos and they've been messing with my terminology lol.
      My wheels are... 🤔 Alexhub or alexrims, Ace-17 I think. They were off an old GT... Avalanche (i think 😂). The frame is a full suspension Ridge Back, so a mish mash of different parts lol.
      Anyway, the "hub" has definitely got a little bit of movement. Should this be corrected, and if so how do I tighten it? Do I need to strip down the spindle... or replace it.
      The slight difference in the chinese 'cassette' of about 0.5mm (im guessing) I was just going to neatly wrap some black electrical tape around the hub, being mindful of the guides/grooves, to get a better snug fit. Dont know how long that'll last but should get a season out of it I reckon.
      Thanks for taking the time to help 👍🏼

    • @DanyoSports
      @DanyoSports  4 роки тому +1

      Ok, to replace the freehub body, you’ll need to remove the locknuts from each side of the wheel, take out the bearings and axle and then use a 10-12mm hex wrench to unscrew the freehub body. I hope this helps.

  • @rayyanhanugrah1982
    @rayyanhanugrah1982 3 роки тому

    you dont change your Chain with another new chain?

    • @DanyoSports
      @DanyoSports  3 роки тому

      Yes, I changed with a new chain.

    • @rayyanhanugrah1982
      @rayyanhanugrah1982 3 роки тому

      @@DanyoSports your RD was very straight to the Chainring than before, is that okay?

    • @DanyoSports
      @DanyoSports  3 роки тому

      Yeah, the RD is fine, I don’t have any issues with it.

  • @showcasekingchannel6012
    @showcasekingchannel6012 3 роки тому

    Sup dude whst derialure you use?

    • @DanyoSports
      @DanyoSports  3 роки тому

      Hey, I’m using the Shimano Deore XT M761.

  • @ns671fr
    @ns671fr 3 роки тому +12

    Your derailleur shouldn't be at that angle on the easiest gear, around 45 degree angle yours is extreme

    • @stinkyfinn6977
      @stinkyfinn6977 3 роки тому +3

      Chains too short with the bigger cog

    • @nzo_6543
      @nzo_6543 2 роки тому

      @Silence yeah, bc it can shift to the largest cog without a problem, but the derailleur is not ok, looks like the entire cage gonna explode to two parts.

    • @mrgoat1756
      @mrgoat1756 2 роки тому

      nah he put his chain on the highest part of the chainring (it's a 2x) guess why you can see the derailleur is performing a peter parker stopping a train

  • @stevenlav228
    @stevenlav228 4 роки тому +2

    Where did you buy it from

  • @allansantosmtb5279
    @allansantosmtb5279 3 роки тому

    Qual melhor cubo pra esse k7?

  • @josz8
    @josz8 3 роки тому

    Hi bro, my setup is currently 1x8 11-40 (sensah mx8) is this cogs will work for me? Thanks

    • @DanyoSports
      @DanyoSports  3 роки тому +1

      Hi, yes, it should work with the hanger extender.

  • @maxspaans4342
    @maxspaans4342 3 роки тому

    my chain has to be very loose to use the 46 cog sprocket, any tips how to fix this?

    • @DanyoSports
      @DanyoSports  3 роки тому

      What derailleur are you using? I guess your cage is not long enough.

    • @maxspaans4342
      @maxspaans4342 3 роки тому

      @@DanyoSports I have a Shimano acera long cage

    • @DanyoSports
      @DanyoSports  3 роки тому

      Check your hanger and chain length, shift your front to the largest chainring and rear to the largest cog, if it’s too loose, shorten 1 to 2 links.

  • @tomcruz3774
    @tomcruz3774 4 роки тому +1

    How long is your chain? I have a similar setup (long cage rd + extender) but my chain won't stay on the 46t cog when I'm going uphill

    • @DanyoSports
      @DanyoSports  4 роки тому +1

      The chain has 108 links so the length is 136cm.

    • @tomcruz3774
      @tomcruz3774 4 роки тому +4

      Just to update on my situation, shifting is fine now and the chain stays on the 46t cog. I used a brand new chain and didn't shorten it (chain is still at 116 links). I'm running a compact crankset up front

    • @kritianhopeguia8847
      @kritianhopeguia8847 4 роки тому

      tom cruz what do u mean compact crankset?

    • @tomcruz3774
      @tomcruz3774 4 роки тому +2

      @@kritianhopeguia8847 50/34 chainrings. you can google cycling terms that you aren't familiar with. People like me can lie right in your face, you know

    • @kritianhopeguia8847
      @kritianhopeguia8847 4 роки тому

      @@tomcruz3774 hey tom what is your rd?

  • @daily_dose_of_nothingness
    @daily_dose_of_nothingness 3 роки тому

    This does not work i have Altus m315 and the chain is not aligned properly even i installed extender to the hanger

    • @DanyoSports
      @DanyoSports  3 роки тому

      If it’s hitting the largest cog, adjust it with the B-Tension screw.

    • @daily_dose_of_nothingness
      @daily_dose_of_nothingness 3 роки тому

      @@DanyoSports now the chain is hitting the frame :/ you mean i need to rotate the extender somehow or? Mine is 3x8 drivetrain how can i send you pictures?

    • @DanyoSports
      @DanyoSports  3 роки тому

      Yes, please go to my Facebook page and send me the pictures

  • @wuzimu3891
    @wuzimu3891 3 роки тому

    this is a 26 thire?

  • @sniperkicker
    @sniperkicker 4 роки тому

    pernah coba turunan yg bebatuan apakah rantai lepas atau RD geser?

  • @christianrey3780
    @christianrey3780 3 роки тому

    Hey bro! Can i ask whats your rd and what speed for your rd

    • @DanyoSports
      @DanyoSports  3 роки тому

      Hi, it’s a 8-speed Shimano Deore XT.

  • @jericosantos2388
    @jericosantos2388 3 роки тому

    Hey man. I just wanna ask if this will work with my mtb. My rd is sunrun index. Hope you can response. Thanks man

    • @DanyoSports
      @DanyoSports  3 роки тому

      Hi, the total capacity of your derailleur is 43T, so it would work with the extender installed.

    • @jericosantos2388
      @jericosantos2388 3 роки тому +1

      @@DanyoSports thanks man appreciate your response

    • @jericosantos2388
      @jericosantos2388 3 роки тому

      Another question man. Do I need to change my chain? Now my mtb is 3x8 set. I am planning to convert it to 1x8 and my chainring will be 36 or 38 t. Do i need to buy a new chain? Thanks man

    • @DanyoSports
      @DanyoSports  3 роки тому

      I would change it if the chain is worn out, don’t let it ruin your new cassette. By the way, you might have to extend your chain, so you might as well get a new one.

    • @jericosantos2388
      @jericosantos2388 3 роки тому

      Do I need to use a 9 speed chain?

  • @marvirendoque7663
    @marvirendoque7663 4 роки тому

    Hello. If not to put hanger extender will it not work?

    • @DanyoSports
      @DanyoSports  4 роки тому +1

      Hi, no it won't work without the extender. By the way, the hanger extender comes with the cassette when you buy it.

    • @marvirendoque7663
      @marvirendoque7663 4 роки тому +1

      @@DanyoSports thank u.. Just want to upgrade My 8 speed cassette to 11-46t.. Newbie here

    • @DanyoSports
      @DanyoSports  4 роки тому

      Nice, have fun with your upgrade.

    • @knotchietv5032
      @knotchietv5032 4 роки тому

      can it work with my Acera 8speed RD?

  • @arjuna3628
    @arjuna3628 3 роки тому

    So no need to change the chain??

    • @DanyoSports
      @DanyoSports  3 роки тому +1

      You don’t have to, but it’s better to use a new chain when you put a new cassette.

    • @arjuna3628
      @arjuna3628 3 роки тому +1

      @@DanyoSports tq for info..

  • @dnarfy8717
    @dnarfy8717 3 роки тому +1

    whats your rd?

  • @jpalantorio3577
    @jpalantorio3577 3 роки тому

    hello, what is the speed of your chain?

  • @jpalantorio3577
    @jpalantorio3577 3 роки тому

    hello, what kinf of hubs do you have?

    • @DanyoSports
      @DanyoSports  3 роки тому +1

      Hi, they are Shimano Deore M525 disc hubs.

  • @jesseheisenberg1680
    @jesseheisenberg1680 3 роки тому

    what kind of RD you're using ?

    • @DanyoSports
      @DanyoSports  3 роки тому

      It’s a Shimano Deore XT Long Cage.

  • @malcampojeshaiahgabrielg.2909
    @malcampojeshaiahgabrielg.2909 3 роки тому

    Did you change your chain?

  • @leicadistoturkiye41
    @leicadistoturkiye41 4 роки тому +1

    Didnt you extend chain? Does it work properly like that?

    • @DanyoSports
      @DanyoSports  4 роки тому +2

      Yes, it depends on your setup and you‘ll probably need to extend it.
      I haven’t reused the old chain, I replaced it with a new one. It’s better to change the chain when you put in a new cassette and crankset.

  • @bobokapo4806
    @bobokapo4806 3 роки тому

    How much? Please reply

    • @DanyoSports
      @DanyoSports  3 роки тому

      It’s $30 US, the kit includes the cassette and hanger extension.

    • @snorttroll4379
      @snorttroll4379 Рік тому

      @@DanyoSports what is the search term?

  • @jpalantorio3577
    @jpalantorio3577 3 роки тому

    how long have you been using this? any updates?

    • @DanyoSports
      @DanyoSports  3 роки тому

      It’s been 5 months and I’ve converted it to 1x8 setup with narrow wide chainring and Hollowtech II bottom bracket.

    • @jpalantorio3577
      @jpalantorio3577 3 роки тому

      @@DanyoSports what's the teeth of your 1x?

    • @DanyoSports
      @DanyoSports  3 роки тому +1

      It’s 32t.

    • @zalcyox.6829
      @zalcyox.6829 3 роки тому

      @@DanyoSports is it okay on uphill?

    • @DanyoSports
      @DanyoSports  3 роки тому

      Yes, it is ok.

  • @faze2000
    @faze2000 4 роки тому

    Will FH-RM 35 shimano hubs fit? will it be compatible?

    • @DanyoSports
      @DanyoSports  4 роки тому +2

      Yes, it would work on 8/9/10-speed hubs.

    • @faze2000
      @faze2000 4 роки тому +1

      @@DanyoSports thank you po

    • @nicolasmarkovski3747
      @nicolasmarkovski3747 4 роки тому

      Would a old 9 speed hub work?? And did have fine tune the derailer?

    • @DanyoSports
      @DanyoSports  4 роки тому +1

      Yes, the hub would work and you need a long cage derailleur. Fine tuning is also necessary.

  • @jpalantorio3577
    @jpalantorio3577 3 роки тому

    what speed is your RD?

    • @DanyoSports
      @DanyoSports  3 роки тому

      It’s a 8 to 10-speed derailleur.

    • @jpalantorio3577
      @jpalantorio3577 3 роки тому

      @@DanyoSports can I use 9 speed Shimano Altus? it is long cage

    • @DanyoSports
      @DanyoSports  3 роки тому

      Yes, it should work fine.

  • @stevenlav228
    @stevenlav228 4 роки тому

    Did u have to use a derailur hanger extender or anything lile that

    • @DanyoSports
      @DanyoSports  4 роки тому

      Yes, I installed a hanger extender.

  • @javeilagan9540
    @javeilagan9540 3 роки тому

    Hi Danyo! Just wanna ask if it's okay to use 9speed chain for that cogs with a 36t chain ring?

    • @DanyoSports
      @DanyoSports  3 роки тому

      Hi, yes, 9 speed chain is compatible with 8 speed cassette.

  • @the_nondrive_side
    @the_nondrive_side 3 роки тому

    That extension looks to be on wrong

  • @hobbiest9358
    @hobbiest9358 4 роки тому

    is this a 27.5?

  • @knotchietv5032
    @knotchietv5032 4 роки тому

    can it work with my 8speed Acera RD?

    • @DanyoSports
      @DanyoSports  4 роки тому

      I think it would fit as long as your derailleur is long cage.

  • @realpurnagurung
    @realpurnagurung 3 роки тому +1

    Awesome

  • @faze2000
    @faze2000 4 роки тому

    What hubs did you use?

    • @DanyoSports
      @DanyoSports  4 роки тому

      It’s a Shimano Deore M525 8/9-Speed Freehub.

  • @BruceChastain
    @BruceChastain 4 роки тому +3

    its somewhat shocking to see a 46t 8 speed. but hey if it works why not.

    • @DanyoSports
      @DanyoSports  4 роки тому +1

      Yeah, it works great at this moment.

    • @moonpie6717
      @moonpie6717 2 роки тому

      @@DanyoSports will it be a little smoother to switch if the front star is 34 ?

  • @slodziak222222
    @slodziak222222 Рік тому

    chain is too short

  • @gerbenposthumus8878
    @gerbenposthumus8878 Рік тому

    Very poor quality and not hardened steel like Shimano. Save your money and don't buy this crab. I have used this cassette in combination with my Bafang BBSHD middle drive motor and in no time the teeth were gone plus one wrong shift and the gear just was bending 30 degrees. My advice DON'T BUY THIS CRAB!!!.Don't buy anything from Ztto because it's all crab!!.Sunrace,and Sunshine the same.

  • @Mark26879
    @Mark26879 3 роки тому

    I have a sram x5 8 speed
    Will the cassette work with it

    • @DanyoSports
      @DanyoSports  3 роки тому +1

      It would work if it’s a long cage derailleur.
      Derailleur Capacity: What Fits 11-46T Cassette?
      ua-cam.com/video/-0g9QzUL-Nk/v-deo.html

  • @azzaki8971
    @azzaki8971 3 роки тому

    Did you change the chain too?

  • @stevenlav228
    @stevenlav228 4 роки тому +2

    Will this work with a sram x4 derailur

    • @DanyoSports
      @DanyoSports  4 роки тому +2

      Yes, it would work if your detailleur is long-cage.