STIGA - How to glue your racket
Вставка
- Опубліковано 18 жов 2024
- Here we show you how to glue your racket using the STIGA Connect Glue.
The Connect glue is our latest non-flammable, non-toxic, VOC-free and environmentally friendly waterbased glue.
Find us at:
www.stigatablet...
/ stigatabletennis
/ stigatabletennis
Most importantly you have to use stiga hands to do this.
PS: thank you guys for the 108 likes! (Its an emergency ambulance number in my state btw) Thank you so much :)
LOL
XD
It's important to apply the glue with the "S" in mind. Anyway, when I get a pre-assembled racket, it always seems to be cut far more neatly than this. I wonder how they do the rubber cutting at the factory.
ua-cam.com/video/tAi4BzdDhRw/v-deo.html look at this vid. when they cut it they use a craft knife and it looks super neat.
@@ges735 this guy in his basement made a better job and was more informative than the official Stiga channel, nice job Stiga
do I need to draw a "J" with a Joola rubber?
Stores usually uses knife. Most professional players seems to be using scissors judging by their rubbers uneven edges hehe.
The cut don’t have to be very precise, cause you are gonna use the edge sticker anyway, you dumbfark
With scissors? it doesn't look nice.
Blades are better
Can you guys please make a racket/rubber info vid? Kind of like a review that categorizes each racket depending on how much power,spin and control it has? I cant decide what racket I should buy from your shops that bests suit me tbh. Thank you
Pro players built own racket, because many of them used to the paddle, so they only change rubbers. They dont change paddles that often, even all paddles are the same for our eyes. It is just feeling that used paddle by you is the perfect one. :)
For the cutting, it is definitely a fail, especially as an education video from such a well known TT brand.
That’s what the edge sticker is for, that’s why you don’t need to be very precise when cutting the rubber, you dumbfark
@@damontan4749 I mean in my opinion it's still shoddy cutting nonetheless. Instead of using scissors I use a carpet knife or the fresh blade of a Stanley knife. Would recommend 👍👍
Most pros & elites use scissor. Cutting with knife has disadvantages. Beginners have no idea the advantages of cutting rubbers with scissor, they just want the racket looks pretty.
What if you apply the glue and then accidentally drop some impurities on the surface, how do you remove the glue in order to prepare it for a new round of glue application?
If it happened to your blade then you can use your hands to remove the glue. If with rubber, use a table tennis ball and rub it gently on the sponge of the rubber the glue will roll up and you can take off large masses of glue without damaging the sponge
Ugly cutting finish.
But thats why they us racket tape. It will never be nice when you cut the rubber but the tape is supposed to protect it and make it look better.
Good job but from where can I buy rubber black and red sheets?
sway hasan stigatabletennis.com
@@nettonetto5549 Thanks.
ttex
What I would give to get this bat....... even with the shoddy cutting.
Hello thanks for the video. Can we use regular white glue (used for general purpose ?)
I don't want to spend extra 15$ special ping pong glue just for old paddles.
Hello, I am a big fan of Stiga and I am practicing table tennis.. What are your suggestions for the better blade and rubber since I can't afford to buy expensive one. Thank you.
How to know what rubber to buy?
S M or H , what this mean?
Very nice racket my tibhar racket
and pimple racket
Does a pack come with one side rubber so we have to order 2 ???
of course
IMPORTANT! Is 50 ml glue enough for a racket?
yes
@@mattias1099 thanks
How about my dynasty carbon, is it coming?
Has it arrive yet?
Thank infonya
Yeah.....so I'm gonna use a scalpel
I don't know if you have already tried this. But a scalpel will often give a way more jagged edge than siccors. I learned this the hard way :)
People saying scissors are awful - very wrong. This is just simply a very poor cutting job. Scissors are easy to use and shape well. Not as well as a scalpel, but at least you don't have to change the blade every couple rubbers.
Rolling the rubbers though, people NEVER hold the rubber up while rolling UNLESS it's a spongeless pimple. If you hold the rubber while rolling, it can overstretch the rubber to a very large degree. Best to place the rubber on, lightly roll it out, then heavily roll over it.
What glue are you using?
Néoprène
can i have that? xD just hoping
what if I don't have that glue??
then buy it?
Liquid latex works just as well.
First like! 😎
Hella uneven! LOL!
Stiga : Rachet : Professional ;
Segue : Padrão : Ex : Tamanho ; Tipo ; Peso ; Modelo ; Padrão : Liga : Mundial ; W.T.T.P.; Normas : Estabelecidas ; Dentro : Padrão ;
Rachet ; Stiga ; Professional .
あんま貼り方綺麗じゃないな
Too much glue. I prefer use credit card to even out the glue and also dont press too much when using the roll tube.
It isn't too much glue. The stuff is 80% water. A thinner amount of glue and the straight edge of a plastic card is a combination that can leave microscopic striations (on the _blade_ application) where there isn't any glue at all. Those will be areas that will not be contributing properly to the uniform shear-tensioning in spin-vis-spin dynamics, eg. counterlooping. Especially unwelcome on the sweet-spot.
We do see striations in this video but they are simply high and low areas, without actually excluding adhesive in the low areas.
What did you expected this is stiga lmao😏😏
Why cut it with a scissor. Just whyyy..
how else would you cut it? sorry im a beginner
I would cut it with a utility knife
@@riiprafa oh!
I think you forgot to remove the rubber cover of the red side before putting the tape on LOL
Very poor cutting job
This is the most irritating "glue your racket" video I've seen so far. Dude didn't make an effort to apply the glue evenly and didn't make an effort to put the rubber level to the blade handle. backhand side glue is horizontal but the rubber is vertical? I've never seen anyone do that.
awful job cutting!
I like how nobody has noticed yet that the second rubber was glued wrong
How was it glued wrong?
You are not professional
You could do that by cutter
It could be nicer and cleaner
I would rather buy a new bat
This glue smells terrible...
give me gift