I don't like those big shoulder ball caps. I understand why McFarlane adds them but sometimes they make them too big. Glad we finally got this from McFarlane,👍
I found out the battinson neck peg works with a bit more apoxy on each end of the pegs because the peg just wiggles around without. Though when the apoxy is on the pegs height works great and remember he didnt really have a neck he was just beef lol so he looks great just like in the film. Oooooh i need to get a Muff toys set!!! Looks amazing!! Thanks kickass review batfam!
Your review read my mind!!! Looks way better than I thought with modifications, I might pick one up and see how he'd look with the spare mezco neck piece and muff toys head I have...
I used a hairdryer to soften up the neck plastic and when u flip the neck piece over, you will see inside there's a thick peg piece where u will need to cut. Get an xacto knife or something small where u can cut the peg piece off, try to go as deep into the cavity as u can cos if u ever want to reverse the procedure u can glue it back easier. Check the video and u can get an idea how deep I went with the cut. Let me know if u have more questions
Yes thank you! I’m replacing my Mcfarlane head with the muff toys batfleck pack B head with the separate neck. I see you have the Inter grated head. Does the bottom of the Intergrated cowl have round peg ? Because the cowl i have does and I’m trying to figure out if I need to modify the cowl at all to make it fit or if the rounded piece is fine as is? Thank you for your help!
@@Theblackout292 so if I read it correctly. U r trying to use the version B head and neck onto the mcfarlane body? And u r wondering if the body of the mcfarlane fig has a ball joint to fit with the MUFF version 2 neck? If that's what u r wondering then the answer is no it won't work because the bottom of the mcfarlane neck uses a deeper peg system to attach the neck to the body and that peg is not a cylinder shape. You can remove the peg system mcfarlane used and glue the muff neck on. But that's a very permanent solution. That's why I kept the mcfarlane neck on and you can actually use the muff neck/ head barbell peg piece and put that on mcfarlane neck. BUT it does make the head a bit too tall, I tried it today and had to mod the mcfarlane socket section by drilling it in a bit so the muff barbell can sit a bit lower. Once u did that docket mod, the miff head and the barbell peg would be able to sit a bit lower into the mcfarlane neck piece. To me that's less of a destructive mod, so if u decided to put the mcfarlane head back on I think it would still work.
@@toys210 I don’t like James Gunn. There are multiple reasons why I shouldn’t. I’m sure you could guess at least one of them but I’ll hold you to it Ben. 😂
I don't like those big shoulder ball caps. I understand why McFarlane adds them but sometimes they make them too big. Glad we finally got this from McFarlane,👍
Yea with some figures they can be quite distracting too. These ones I think they blend in with the rest of the suit pretty good
I actually replaced the stock peg with the Muff toys peg which is alot shorter and works fine and gives a more permanent fit with articulation
That sounds interesting! I'd imagine a little dremeling was needed...
Nice. Definitely a more permanent mod since the neck socket piece from the mcfarlane one is much smaller. Hmmm I might try that as well.
I just used a shorter neck peg and swiped a pleather cape I made for the Mattel bvs batfleck!
Nice!!! Yea a shorter neck peg and a nicer cape can turn this fig to a much-loved fig too
I found out the battinson neck peg works with a bit more apoxy on each end of the pegs because the peg just wiggles around without. Though when the apoxy is on the pegs height works great and remember he didnt really have a neck he was just beef lol so he looks great just like in the film. Oooooh i need to get a Muff toys set!!! Looks amazing!! Thanks kickass review batfam!
Thank you very much. And I'll look into that neck peg too thanks for the info
Your review read my mind!!! Looks way better than I thought with modifications, I might pick one up and see how he'd look with the spare mezco neck piece and muff toys head I have...
Yea definitely the way to go, the muff head will work perfectly too
Just use a shorter neck joint. I used the Duke Thomas neck joint and both figures look better now.
I am so surprised mcfarlane ppl didn't catch that long neck when designing
How did you take the cowl off?
I used a hairdryer to soften up the neck plastic and when u flip the neck piece over, you will see inside there's a thick peg piece where u will need to cut. Get an xacto knife or something small where u can cut the peg piece off, try to go as deep into the cavity as u can cos if u ever want to reverse the procedure u can glue it back easier. Check the video and u can get an idea how deep I went with the cut. Let me know if u have more questions
Yes thank you! I’m replacing my Mcfarlane head with the muff toys batfleck pack B head with the separate neck. I see you have the Inter grated head. Does the bottom of the Intergrated cowl have round peg ? Because the cowl i have does and I’m trying to figure out if I need to modify the cowl at all to make it fit or if the rounded piece is fine as is? Thank you for your help!
@@Theblackout292 so if I read it correctly. U r trying to use the version B head and neck onto the mcfarlane body? And u r wondering if the body of the mcfarlane fig has a ball joint to fit with the MUFF version 2 neck? If that's what u r wondering then the answer is no it won't work because the bottom of the mcfarlane neck uses a deeper peg system to attach the neck to the body and that peg is not a cylinder shape. You can remove the peg system mcfarlane used and glue the muff neck on. But that's a very permanent solution. That's why I kept the mcfarlane neck on and you can actually use the muff neck/ head barbell peg piece and put that on mcfarlane neck. BUT it does make the head a bit too tall, I tried it today and had to mod the mcfarlane socket section by drilling it in a bit so the muff barbell can sit a bit lower. Once u did that docket mod, the miff head and the barbell peg would be able to sit a bit lower into the mcfarlane neck piece. To me that's less of a destructive mod, so if u decided to put the mcfarlane head back on I think it would still work.
Very informative. Thanks!
You are welcome, thanks for checking it out
@@toys210 You have a new subscriber here. 💯
@@giobunsoy thank you very much for the support 🙏
That muff toys head looks great but the mcfarlane body is still not beefy enough for Batfleck.
Yea I agree with you too. A tad big shorter and a bit bigger would make this fig perfect
@@toys210 did you see the Fondjoy BVS Batflect coming out? Bet that Muff toys head would be perfect on that body.
@@cajuncoyote2039 I sure did, currently I have it on preorder, it looks pretty nice abd cheap enough for me to give it a try
@@cajuncoyote2039 Sadly, muff toys head is too small for Fondjoy. But Fondjoy batman looks great with its own batflect head
@@TianShuLiu i have that fondjoy Batfleck ordered via bombusbee, hoping they get them in soon.
Great job even though I don't like batfleck 😂🥞🦇
Thanks, hehe I am ok with him being batman. They were all good 👍
Batfleck the goat
fondjoy version is a thousand times better
I ordered one but it hasn't come in yet. Hopefully it is better than the mcfarlane. Can't wait
This figure was rushed to production...
Yea most likely, there are so many good looking customs out there too. This fig really need a great head sculpt
I’m just gonna be honest with you Ben. I’m not seeing Superman Legacy. I’ma be pirating that shit online.
Maybe when there's a trailer you might change your mind 😉
@@toys210 I don’t like James Gunn. There are multiple reasons why I shouldn’t. I’m sure you could guess at least one of them but I’ll hold you to it Ben. 😂