ON WOOD _ Walnut, leaf bowl / Wood Carving / 우드카빙 / 월넛, 나뭇잎 접시
Вставка
- Опубліковано 25 сер 2024
- The leaf-motivated plate was carving with a hand tool using walnuts.
I cut the top neatly to make it easier to contain something, and I put in a thick knife mark because I wanted to give the texture rough and powerful on the bottom. It's very hard, but I worked with a 42mm carving knife.
But during the work, I remembered that I wanted to finish by taking advantage of the hammer's hitting traces from a long time ago, so I tried it this time. Regular and irregular shallow hitting marks remain, so it feels like a clean cutting and another texture.
530 x 200 x 80mm
instagram _ / on_wood_on
blog _ blog.naver.com...
--------------------------------------------------------------------------------
🎵Music provided by 브금대통령
🎵Track : 겨울은 따뜻하다 - • [Royalty Free Music] A...
🎵Track : 당신과 함께 한다면 - • [Royalty Free Music] 당...
--------------------------------------------------------------------------------
영상미를 즐기다보니 멋진 나뭇잎 접시가 나왔네요😍 잘 감상했어요, 감사합니다~
감사합니다..^^
멋진 작업 즐겁게 감상하고갑니다
조각칼이 나무를 타고 지나는 소리 너무 좋네요! ㅜㅜ
더구나 동그랗게 말리는 나무 조각은 제목과 너무 잘 어울립니다
감사합니다. 좋은하루 보내세요..^^
항상 잘 보고 갑니다
감사합니다. 올해 마무리 잘 하시고 편안한 주말 보내세요..^^
The feeling of dried branches seems to be expressed in the middle of winter.
Roughness and delicacy.This coexistence is beautiful!
Merry Christmas~^^
It's very cold here...
I hope you have a happy and warm Christmas with good people. :)
Beautiful piece of carving, and an excellent video. Many thanks. Keep them coming.
Thank you. have a good day. :)
오~~~ 넘넘
멋집니다
감사합니다~ ^^
That gouge is a monster! Great work
Monster are scary~😄😄
Merry Christmas.
정말 예술이네요~~
감사합니다..^^
Perfect 👏👏👏👏 you are an artist!!
thank you. have a happy christmas..^^
Your pieces of work are truly magnificent I keep watching them on and on and on ……
I’m taking a very first steps into carving myself, would you possibly advise what tools you use?
올려주시는 영상 늘상 즐겁게 보고 있습니다... 한참을 고민하다... 조심스레 여쭐게 있어 글 남겨봅니다... 환도 쓸때 선생님처럼 선을 길고 쭉 뻗게 내기가 쉽지 않은데.. 팁을 좀 얻을수 있을까요?
안녕하세요. 단순히 글로 설명 할수 있는 부분이 아닌듯 합니다. 나무의 결, 조각도를 잡는 습관, 날의 관리, 조각도를 미는 속도나 힘.... 여러가지 원인이 있을 수 있어서 옆에서 보지 않고는 딱 이방법으로 하시면 됩니다..라고 할 수가 없네요..;;
망치로 조각도 손잡이 뒤를 치면,
조각도 날이 조각도 손잡이에 박혀 들어가버리던데
애시당초 조각도 제작이 잘못된건가요?
조각도 날이 조각도 손잡이에 박혀들어가는것을 예방할 방법이 있을까요?
조각도가 손잡이 쪽으로 들어가는건 처음 들어보고 제가 이해하고 있는게 맞는지 헤깔리네요. 그렇다면 불량일 가능성이 높아 보입니다. 손잡이가 쪼개지면 모를까 칠때마다 들어가지는 않습니다..;;
@@onwood 초등학교 때 산 조각도라서 그런거 같습니다. 5000원에 조각도 4개 들어있는것. 연마제 처리를 안하고 고운 사포로 다듬는것만 하면 어떤 문제점이 발생되나요? 쉽게 날이 무뎌지나요?