PRS S2 Standard 24 Better and Worse than I thought... | Luthier Teardown
Вставка
- Опубліковано 27 тра 2024
- Welcome to Crimson Guitars HQ ua-cam.com/users/CrimsonC... and a Luthier Teardown with Ben looking at a PRS S2 Standard 24. For a guitar over £1,000 there seems to be a lot of issues that slipped through Quality Control. What do you think?
Dorset Guitar Museum www.dorsetguitarmuseum.com
#teardown #electricguitar #giveaway #prs #qualitycontrol
Chapters:
0:00 Introducing the PRS S2 Standard 24
0:35 Ben's initial thoughts...
2:25 A closer look -
5:39 Off with the strings - on with checking frets and the nut
9:37 Adjusting the nut and bridge height
14:36 First impressions
16:45 Don't forget you can own this guitar and 'The Demo'
Check out our new Discord server for Guitar Building Goodness here / discord
Join this channel to get access to perks:
/ @crimsoncustomguitars and don't forget the Luthiers Question Time Podcast, available on all good platforms or through this link luthiersquestiontime.buzzspro...
Our camera set up includes: the Blackmagic ATEM Mini Pro, Prime Cameras (Front facing and over bench) Canon EOS 250D, suspended from the ceiling (bench side) Canon EOS 90D and on the movable tripod a Canon M6 Mark II
Music used in this video from Epidemic Sound - www.epidemicsound.com/referra...
___________________________________________________________________________________
We'd like to thank our partners for helping to make this video series possible.
Triton Tools - www.tritontools.com/en-GB
ISOtunes Bluetooth Hearing Protection - bit.ly/36YmKro
Wagner Meters - www.wagnermeters.com/
Leatherman - www.leatherman.co.uk/
Support us by supporting our Partners, and at the same time get yourself a great deal with ISOtunes. Use code "CRIMSON10" for 10% OFF with this link: bit.ly/36YmKro
___________________________________________________________________________________
WEBSITE: www.crimsonguitars.com
VINTAGE TOOL SHOP: bit.ly/3oA8uQK
DAILY GUITAR DRAW: dailyguitardraw.com/
DORSET GUITAR MUSEUM: dorsetguitarmuseum.com/
Luthier’s Tools & Supplies: bit.ly/LuthTools
Guitar Building Courses: bit.ly/LuthierySchool
Kit Guitars: bit.ly/KitGuitars
EXTRAS channel: bit.ly/3gQmul1
SOCIAL
Instagram - / crimsonguitars
Facebook - / crimsoncustomguitars
Patreon - / crimsonguitars
___________________________________________________________________________________
Thank you again for all your support, we really, really appreciate it! - Ben
Stay tuned and stay awesome!
___________________________________________________________________________________ - Навчання та стиль
I don't think you were too hard on PRS at all - I've bought dozens of guitars, mostly on the cheaper side, and I've never had action that high at the nut. It's a 15 minute quality control step that I would absolutely expect on a $1500 guitar.
@15:51….I agree …..however, that’s the way PRS does their nuts…I never understood it, but it works…they stay in tune and work perfectly!!!!!
My £4k Gibson Ben was absolutely shockingly setup from the factory and the tooling marks on the fretboard from the plek machine were so prevalent. It took me a full 10 hours so get it to the standard I would expect from me doing a setup for a customer. I emailed Gibson with photos of the fretboard and the marks of the frets and the un uniform fret nibs and Gibson replied with 'the marks identified in your supplied photos are within Gibson USA specs!!!' Shocking man!
The answer of “we got your money, go fly a kite!”
@@jamesmarkham7489 I wouldn't put too much faith in unsubstantiated Gibson hate on the internet. I'm not saying he's not telling the truth, but there's a ton of underhanded marketing that goes on on the internet. I'm always amused at how EVERYONE says PRS quality is out of this world, but this guitar just looks like a fairly typical mass produced "lower end" USA made guitar. I'm not really surprised or shocked and neither would I be from Gibson, Fender, etc...
I refuse to buy a modern day Gibson
Thanks for improving the quality of the sound on joshs' demo!
I could be wrong, but I believe the nut the PRS uses is a bronze impregnated graphite material, or something along those lines.
Yes it is. I really like it. I even put PRS nuts on other brand guitars.
It would be interesting to get the manufacturers (PRS) response to Ben's improvements.
Yep - it would be great to see Paul Reed Smith talk to Ben and address the issues. Hopefully, he'd take the criticisms on the chin and admit the guitar wasn't all it could be when it left the factory.
@@rowbags3017 Paul would sell them as tone enhancing features...
These teardowns are very very good because we're so used to youtubers endorsing and forgetting about the negatives. I saw Tim Pierce raving about the new PRS DGT SE as being the best guitar for under 1000 bucks. I'd love to see a teardown of that - or the Yamaha revstar standards. AS a non-pro 1000 bucks tops is the range I'd be operating to buy a guitar.
Check out the Yamaha Pacifica 611H ! I'm going with better and under 700 bucks.
The nut is made of what PRS used to call 'Unobtainium' and I believe it Bronze and carbon fibre mix!
Potentiometers are custom-spec CTS made specifically for PRS. I love love love how easily and smoothly they move.
PRS have also always had deep-cut nut slots.
The PRS specs for nut height, relief and action are available on the PRS website. That being said, they are conservative. I run mine with 20 thousands on the low E and A, 18 thousandths on the D / G and 16 on the B/E strings at first fret. Relief at .008 thousandths of an inch, and action at 4/64th on the low e, just below that and just above 3/64th high e. Never had an issue with PRS frets, always been level for me. With that setup and proper height on pickups, it absolutely rocks. Just my opinion though.
Would be interesting to see you reviewing something from Ernie ball music man!
The S2s I have seen have all had one piece bodies. I like the PRS tuners, if you have the guitar on a bench while you restring you do everything topside and it is very quick. The truss rod nut looks normal to me it's the same on the high end models, I believe it is double acting
Played a satin one of these last weekend.
Was really impressed with the neck feel of the satin finish which felt more like oil since it had gone into the wood. Fret edge was also pretty rolled, which felt at home.
The nut on the one I tried was cut correctly, but didn't look that tidy. Surface had some tool marks and it wasn't completely flush against the neck.
bought this very guitar in a different colour and a s2 vela in the sales from peach guitars, both around £900, both arrived setup perfectly, no problems at all.
my S2 standard 24 matte finish is amazing. Perfect set up. However, the humbuckers sounded waaaaay too thin and I did change the saddles to brass and added a brass tremolo block which made a world of difference.
I bought a PRS Holcomb in 2019. Great guitar, but I had to replace the nut almost immediately, get a professional setup and replace the switch which failed before it left the shop (it was either return under warranty for a who-knows how long wait or put in a quality switch). Aggravating at the time, but now I have a quality guitar that I am extremely happy with.
My new Standard 22 needed the truss rod tightened quite a bit. It was an end of line blowout so I guess it had been stored in a warehouse for a couple of years. Once adjusted though it has been great
I own the exact same. The only PRS I ever liked, so I bought it. No PRS I tried has ever matched up to my LP's. In this case I went into a store to try a Mira SE and was very disappointed (high note fret outs in high register and a bad selector, didn't have "it"). Looked around and picked up the S2... hey this is nice, really nice, yadda yadda. $$. Trem works great, tuning was superior, no qc issues (for twice the price there better not be). Went home, 10 days later finish cracks in the clear by the neck angles on the body. 10 years ok... 10 days, wtf. Messed w/ the pickup height and poles, ok I can live with them (barely). No time flat scratchy vol. pot (which will move if the cat farts). No issue with the nut. I'm happy I bought the guitar. I will never buy another one though. Paid good money for this thing. I also seem to be losing interest in the pickups. (Can you imagine if Gibson put Epiphone pickups in a LP?) When I need to I use a boss ge-7 (noisey thing) to give me what the pickups don't. Incidentally the prs rep said "we'll send it back and make it perfect". I do like the guitar and don't want it effed with. I also understand the tendencies of Lacquer and edge joints. The finish cracks have not gotten worse. I don't plan on it, but the resale value went way down due to these cracks. Thanks for putting this vid up !
Ben, the PRS American nuts contain either brass or copper dust in the mixture iirc on a video. You can see it if you file the top of the nut. They often have very deep slots. That said I can see the brass filings in my ce 24 but I think the s2 nut is the same as the se as the s2 line is American made but with PRS se bridges and pickups etc
Yeah brass and graphite is what the mixture is.
PRS have always had deep-cut nut slots, and of the 8 that I own, including an S2 and two SEs, I’ve never had any issues whatsoever.
@@JordonBeal they are well cut but I filed the ce nut down and shaped the edges to make it smoother on the hand as I did have tuning issues with the trem. Combined with a goldo back box it’s way better
For £1600 or thereabouts it should not need the nut fixed; if it needs adjustment of the truss rod that's fine, but nobody should need to be using a file on a guitar that costs that much.
Good video. I ordered one and although the nut was cut correctly, the rest of the setup was terrible. Needless to say I was pretty disappointed but after doing a complete setup myself it plays wonderfully. I expected more from a US made PRS....quality control at PRS should take note of your video. Thanks.
The difference between the SE and S2 is that you get to say you have a "real" prs, vs an import. Personally, I don't worry about country of origin anymore from production guitar companies. It's all CAD & CNC. the quality at the end is all that matters.
AFAIK the S2 do use one piece bodies like the cores. And they use brass powder in the nuts. Paul likes to use brass at contact points for the strings. Says it improves the tone.
And my last two SE’s have came set up similar to this one. And both came from a big store in the US that supposedly looks them over before shipping them out.
So it seems they’re more interested in quantity over quality right now. Hopefully they get it sorted.
Because my cores are perfect and came perfectly set up.
I played one of the these once. I liked it. Sounded great and played great. It was used so someone probably set it up.
If you have a dual action truss rod, do you still adopt the usual lefty-loosy, righty-tighty for making adjustments?
PRS state, 0.4 to 0.6 mm for the 1st string over the first fret, 0.5 to 0.7 mm for the 6th string over the first fret. So they’re good factor of two over that.
Hey Ben if you are saying there is a lot of relief my thought is something happened in shipping. What store did you order it from, I feel like it sat around for a while. PRS standard setup is to not have much neck relief, about as close to flat. I know they often have some extra at the nut just to be safe because it is easier to drop it down than build it back up.
Funny you mentioned about there Trussrods. Ive found whatever truss rods they use to be super responsive too.
2:25, next thing you know, you're surprised why the notes of the E and A string went flat all of a sudden.
Glad you corrected that string winding job nobody is talking about later on.
i have a new core custom 24, factory set up was horrible, action was too high and so was the string tension, i watched this vid and decided to copy what you did and lowered the action on each saddle by one full 360 turn, this has given me unwanted fret buzz on the 5th and 6 th strings though so i had to raise those 2 strings a 180 degree turn, fret buzz is still presant but minimal, would a truss rod adjustment help? i dont really want to touch it i am a bit scared of truss rods
My S2 is absolutely perfect. Level frets and nothing to complain about. Now every single Fender I've owned and there's been a lot, they all needed a fret level and recrowning. I'm talking about over 20 guitars from Fender.
I own a SE Hollowbody II with piezo and it is a dream; also Epiphones, Ibanezes, Squires and Electromatics that are a joy at a fraction of the cost of the American made "standards". My Canuck made Seagull is enriching, as is the American made Martin.
I believe the nut is some mixture of graphite and brass
I've now noticed in guitars and mountainbikes: The 'Made in the USA' quality has become a marketing myth, probably already 2 decades ago.
I am surprised you had a bad experience with S2. I have core PRS and two S2 satins and the fretwork on S2’s is perfect, fretboard edges are quite rounded. S2’s have 1 piece body and 3 piece neck, but not 3 longitudinal pieces. The nut as PRS says it is a propriatery nut with bronze dust impregnated. And the satin S2’s I have are incredibly resonant and acoustically loud. I was expecting that you would like it actually :)..
I've got 2 S2 2408s - superb guitars.
Recently bought a PRS SE 24 and the fret work was horrendous! Luckily I have the crimson tools to sort that out 😊
I just sold my PRS Paul’s guitar SE because it had the exact same problems. I paid 1200 CAD for the guitar I expected it to play like a PRS out of the factory. It was fretting out at the 13 hard, unless I had the action way up. Then to top that, it had a funky toggle switch that was intermittent.
How long did it take to sort the nut out? 1/2 hour? For the price of the guitar surely that could be expected to have been done at factory.
Josh is a tasteful player. Respect
I thought this may be a little click baity… but you could see that nut height was high AF. Still… I like this guitar… and PRS in general. Cheers for these reviews/inspections
I was watching Philip McKnight and he stated that nuts are consistently high, so that we can bring it down to height we like. It looks to ship with such a high nut though that it comes across more as laziness than the former explanation
@@martyshwaartz971 that does sound like an excuse more than anything else. Standard specs for nut slot height are generally universal.
I have many prs s2 guitars and they've all been Ace, but we can't all be lucky i guess
They almost always come with a high setup from the factory. Almost every guitar I’ve ever bought came in at 2 mm of height . I prefer it a little lower but I think they do it because if in a pinch you had to pull it off the wall and play it , you can manage a high action but if it’s fretting out from being too low it’s unusable
Do you think that perhaps the neck was set up correctly at the factory but - perhaps due to too short aging of the neck wood- in the two years that this seems to have been in a warehouse it just re-adjusted?
I have three PRS guitars, 1 core, and 2 SE's and I have had no such issues with any of them. I do however have to add, I get all my guitars from Sweetwater and their pre-ship inspection is rumored to be excellent.
Same for me. I have two SE, one core and one CE and all of them have been perfection. Like you, I bought from Sweetwater. I tend to ask for deals and use that saved money to have them install a bone nut and do a set up, which is $200. It's worth it to me. As far as built quality (fret work), I haven't had any issue at all. The SE's are both just as nice as the other two, as far as QC. Every guitar company will have a percentage of problems with QC, the difference being that PRS seems to keep that percentage lower than the other bog brands.
I love an outro by Blue Sparkle.
I filed my nut too low, & now I'll have to find a luthier. Lesson learned!
Is the nut material designed to avoid sticking? Like the Teflon you mentioned?
Apparently they often add powdered bronze. It is a low friction material, readily obtainable and probably cheaper than powdered Teflon. It is also easier on files if you do need to file it.
Based in the UK? If so I would expect the shipping could have caused some slight neck/wood movement. I have PRSs from the SE line up to Private Stock. All good. I gig with an S2 and it has become my favorite guitar. It was near perfect out of the box. I do not like the PRS knobs as they are too slippery and too fast. I replaced them with Tele style barrell knobs. My 2 cents.
I’ve had 2 PRS SEs from Korea with TERRIBLE Nuts. Not so much height but they were buried right in the nut & really didn’t need to be. I’ve replaced one & filed down the other to a more respectable depth
every se I have has had a graphtech nut put on it
Paul Reed Smith would be horrified to see this Ben
I would like to see you do a Luthier Teardown on the PRS SE Hollowbody 2 Piezo.
Me too! I kind of want to own that guitar myself!
Why strings would stick any more if they are embedded halfway into the nut?
Weird, I looked at the different Custom 24s on Sweetwater, and it sure looks like the SEs have cushions on the strap buttons, and the S2 and Core don't. It makes me wonder if the S2 and Core use different hardware somehow, but that doesn't excuse what appears to be a jankier guitar at twice the price.
The differences between the guitars from Korea and USA is who did the work and what manager took what decisions. That goes both ways as for quality. A great factory setup is a choice. A bad factory setup is also a choice. Well done.
Advice, please. Have a Fender 5string Jazz deluxe, and the forward bow seems to have increased. So tried a gentle adjustment to the truss rod (a single action Fender style, I presume) and it loosens fine, but then rotating back again, it just gets to a point where it requires too much effort to safely turn it. So basically am unable to flatten the action enough, to where it used to be. Is this some kind of stuck truss rod? If so, what can i do about it?
Thanks!
Something is binding for sure. It's either you are out of travel on the truss rod threads, or the threads are marred at the point where the nut jams up.
Try completely loosening the rod and removing the adjustment portion completely. Then get a flashlight and see if you can scope out the threads.
Has it always behaved this way?
@@peachmelba1000 Thanks fro the reply. No, i don't know exactly when this started, but it was sitting in a cold room for a while, and it was when i started using it with a new band, that i noticed the bow in the neck had increased. That's when i found out i wasn't able to adjust the forward bow out, to lower the action to where it used to be.
Will try out your suggestions, and see what happens. Just feels like the rod has stuck, almost. But it definitely doesn't want to turn much more, so i am very wary of over tightening it and stripping the threads, or even breaking the rod entirely!
@@timbeaton5045 You might have a case wherein the threads on the rod end have some light corrosion. If it was stored cold, and then warmed quickly, it's possible that some condensation could have formed on the threads, which may have then caused some rust. The rod is just mild steel, and the thread series is fine enough that a small bit of schmutz would be enough to bind it up.
@@peachmelba1000 Indeed. Nice to know that the community here is helpful as ever! Will do some careful removals of the neck, and rod end nut, and see what's going on.
the truss rod should always be 2-way in a modern fender, and stiff is expected. turn it 1/4 turn at a time once you have that resistance. And some fenders just have crap necks which will never produce good action past the 9th fret.
I suggest you take the strings off and try to use the truss rod to level the board to perfectly flat. Now check your frets for also being perfectly flat using a fret rocker. If you have that, restring the guitar. It might naturally take the appropriate slight bow between the 1st and 4th frets, or you might need to make 1/4 turn micro adjustments.
I really recommend the Music Nomad Precision Setup Gauge set to help you make all the truss rod and bridge adjustments you can. Worth always having around. I think Amazon is cheaper than their website price.
I don't know the QC route for S2's. I'd imagine they're checked in the USA as they come off the line.
I do know SE's are checked off the production line by Cortek then re-inspected by PRS regionally (PRS Europe, PRS USA) before they're sent to dealers. It *may* be that SE's are getting two checks and S2's "only" get checked one time in the US. It may be the neck shifted climate from USA to UK.
But none of that explains why the nut was cut way too high. Or why the UK(?) retailer didn't adjust the nut or the neck - though reading the smallprint on some major online retailers, if you don't explicitly ask for an inspection they only spot check at random before shipping. Maybe the factory leave fat on the nut for the retailer to hone to customer preferred setup - maybe the retailer is the culprit here. Lots of maybes.
Not exactly a shining advert for S2's or their retailers. But fortunate that it's irritating small things that are easily fixable.
I think it's an interesting video concept for a luthier to make videos pulling apart his competitors instruments just to pick faults in them, usually with little to no scrutiny placed on their own workmanship. I'd suggest this video may not be completely impartial but hey I know very little about marketing and youtube. Interesting video none the less.
Honestly, when I see a scarf joint, I think that it's a higher quality. At least in terms of durability. I've never considered making a neck one piece with an angled headstock.
i'm pretty sure it isnt a wide thin neck...but regular
When painting a dark item white (or light colours in general) use a base coat of silver.
So why not reduce the excess string depth at the nut?
I guess it depends on how far off the nut is as far as if you are being too rough on PRS. I've always been under the impression that with mass produced instruments that they do leave the nut "a little" high. If they tried to set it up "perfectly and went too far the nut would be ruined. And I don't think you can in clear conscience sell a guitar that has had it's nut replaced as a 1st quality guitar. Maybe I'm wrong? Although as you pointed out the strings should not be so low in the nut. It needs to be trimmed down to avoid tuning issues. Especially with the trem.
And is it a lacquer finish on this guitar? I didn't know PRS used Lacquer on their cheaper instruments.
A few years ago tyou could get one of those for £800 or so in a sale. I did! Mine's flawless, plays better than my CE and my Custom 22.
I dont think having to adjust the truss rod on a guitar that's shipped around the world and sat around for 15 months is too much to ask . If I bought it new I would ask the shop for a quick setup and adjustment anyway . the nut was bad though
Dare I say that this exactly replicates the days when Japan made Fenders,, and they were better than American made. IMO being made in the US is no guarantee of good build quality. The SE range is phenomenal value still
Had both Korean and Indonesian SE and they've been great from the factory. Disappointing build issues let alone setup with your "USA" S2.
I have an S2. I agree mine came from the factory with a garbage setup. I love it but there's one thing i hate that makes me want to get rid of it... String rolloff on both E strings on multiple frets. I have never had this problem on another guitar and i could never gig with this guitar because of the rolloff problem
I had a Washburn Wi65pro like that, great guitar but flawed, might be a set neck thing , you get the odd bad one.
Given this price, I have to compare these issues to my experience with Gibson's budget-USA lines of studios and tributes. On only one Gibson/Epiphone of 12 I have, my Epiphone Prophesy is the only one that needed work on the nut. The Tributes and studios share a similar bare-bones inexpensive finish and can feel a little unfinished. There have been many attempts by other companies to pull off a USA budget line, but most are unsuccessful, like the original Music Man Sub series trying to pair simplified bodies and finishes with Music Man reputation which ultimately turns into an Asian line.
PRS could easily have done a mid-tier guitar at premium import prices in line with ESP/LTD except they'd undermine their overpriced USA made tiers. That would have at least assured appropriate QC.
A specific example of Gibson lower tier success can be found by watching Dylan Talks Tone when he's talking in detail about his Gibson SG Jr.
While the Gibson Tribute/Studio guitars pull this off reasonably well, the only $1500 range USA made guitars worth buying in my experience are made by G&L. The money is saved by keeping marketing costs low and retaining the original Leo Fender assembly line model, but you will not find a fit/finish/setup issue with a Fullerton Deluxe G&L. I did drop the action on one, but it didn't even need intonation adjustment, let alone nut slot issues.
Was this brand new?
All manufacturers have bad days, but that is what quality control is for. This should have never left PRS in this condition. That other companies also let rubbish leave the factory, is not an excuse. We expect more from PRS, and made in usa in general, as we pay more for those products.
I've had 2 PRS S2 guitars: a Vela Semi Hollow and a McCarty 594. Both beautiful guitars, the 594 was better built and put together in my opinion. The Vela is in the same antique white you have there, however came with defects in the nitro finish. Been waiting for a replacement and it has taken over a year, PRS sent 2 additional Antique White models out (im in Australia) and both of those replacements had the same nitro defect.
It has frustrated me quite a bit. Which is a shame because the Vela is such a killer guitar and feels so good to play. Incredibly resonant and light weight.
I bought a £2k Fender mail order that was and still is shocking, yet I also have a PRS SE Tremonti that was spot on. All manufacturers have good and bad days but far east guitars are pretty damn good. If you want to tear down my Fender let me know.
i think it's better off getting a SE model than a S2 model since the electronics are from the SE anyway and if the workmanship is worse off than the SE, what's the point of paying the premium for?
because the workmanship isn't worse. find me more videos like this. this is an anomaly. I have the same guitar but from 2019. it came setup perfectly.
that said though, I bought mine for $850 new and the price has risen to about $1500 now which is a pretty drastic rise and not sure if i would pay that kind of loot now. probably just get a used ce at that point.
Well that setup isn't going to buzz, lol. First step of owning any guitar, set it up to fit your preferences. But the stock setup should be better than what you got. I think PRS aims for a 2 mm at the 12th setup.
Dumb question, could you have sanded the bottom of the nut down so the strings didn’t sit so deep?
thats one crispy sounding guitar (in a good way)
The SEs get inspected, set up and have issues corrected in Maryland.
Maryland only inspect SE's destined for Americas.
PRS Europe (in the UK) do SE checks for European stock. There's an old vid on the PRS Europe channel.
I heard mention there's a different check route for Australasia/Japan too.
It doesn't make logistical sense to ship every SE half way round the world from Indonesia to Maryland then a quarter of the way back again to Europe/Australasia retailers.
A 2000€ instrument is not considered "budget" in my village...
Wow even my SE's seem ok!
Bought 2 prs guitars and after playing them and then playing my fender and my gibson I packes them up and sent them back. Love the style and looks of them but they just were not any better and not up to the quality I was expecting
"Made in the USA" means precious little over here in Europe.
I've seen (and played ánd owned) Gibsons that were just B choice / factory seconds at best, and heard rumours from someone importing them that thát is actually what we get over here: factory rejects.
If you order from the US, paying their preferred way shipping already costing multiple hundreds of euros, then add import tax (VAT), and if you then find something to be wrong with the instrument, you're not likely going to ship it back at your expense (and their preferred service, all too often FedEx....), so you'll just grin and bear it.
I've seen this lack of quality, in spite of the hefty pricetag, too often over the years to think it coincidence.
But I'm just a private buyer, not a well known (and influential!) luthier - you'd think they'd get you a properly made and set-up guitar at least 🤣👍😉
Ive had £2200 Jacksons that needed a full fret level, £1200 Fenders with huge fret sprout and horrible playability. Funy that my Gibson arrived flawless. Everything is so hit or miss these days.
Here's my honest if controversial opinion....
Think of wage bills of workers in USA vs Indonesia. Hence why I believe the set up on usa guitars is often poor, it simply costs a lot if they're a USA worker. I'd love to know what the time constraints are on a USA production guitar set up?
PS I have a prs ce22 which is excellently setup and possibly the most stable guitar in my arsenal so my personal experience with (admittedly a 20 year old guitar ) prs is very good.
USA guitar factory employees definitely aren't paid enough. And customers wonder why they get QC issues on high end guitars lmao
Scarf joint is frowned upon by Gibson snobs, mainly. The most expensive and desirable classical guitars have always had scarf joints and it´s exactly for its strength.
Guitar Giveaway website seem broken
My Standard 22 S2 charcoal satin IS a one piece mahogany body
It almost looks like they put the wrong nut on that completely. Might be better to cut a new nut for it to fit and look correct.
I have no idea what the specs from PRS are for action, but what you measured was wayyyy too high. I don't think it's unreasonable to expect a guitar that costs a thousand and a half or more to be set up well with smooth frets, a perfect nut, and have a basically flawless finish (I guess Gibson should also take note). However, if it was made in 2021 and you filmed in January 2023, it's possible that some sort of settling or whatever happened? Dunno. I definitely don't think you were too hard on them, and I'm a huge PRS fan. I only own four guitars, and all four are PRS, including two USA CE24 Semi-hollows. But your criticisms are fair.
Always lusted after a prs. Than a guy with tattoo replacement hair.. inspired me to make my own baby's of wood and magnets n wire. Thanks sir. And yeah. That's alota money to have bad funk.
Prs headstock= biker artcraft= high school shop class = Hartley Peavy aesthetic. How exactly does its shape relate to the body? Oh,,,it does'nt.
There is only one issue with this guitar. The bridge materials. Change at least the saddles with anything of quality and you'll have a great instrument
16:03, good save.
Best leave your sticky nuts out of it. 😄
I thing thath action was hight, beacause they set up S2 and SE for 9 gague strings, not 10. I have the same isue with my SE when i put 10s on it. Action was hight and I needed to do proper set up. My opinion.
Paul is gonna have a fit when he sees this.
If the guitar plays in tune at the first fret, the nut height is correct and will exhibit that tiny space between the string and the first fret wire. That was clearly way too high, I wonder how out of tune it was.
So a guitar built during lockdown periods and then sat in storage and transhipped a few times over 18 months had a bit too much relief; pass
High nut; ok gives room for heavy strings and a set up for owners preference but will feel awful especially to a beginner; fail - if these are the strings then nut should be right for these strings, especially slot depth, but PRS nut should be easy to source and replace cheaply for those who want heavy strings or high action, Paul rates his nut
Poor paint job, shouldn't have passed QC but again covid era, QC guy in paint shop might have been ill that day; borderline fail
The new SE's seem great, makes the S2 line redundant, but I bet Paul will be focusing on S2 line hard this year
Finally someone exposing prs for this BS perfect ness theory behind the company.
I can't stand anything painted on a guitar !! My Son has this guitar in black. I just got him a PRS SE 7 string and it sounds excellent so far but this is only the 2nd day lol. But don't worry, you are still building a couple for him. As soon as I can lol.
If you think the PRS set up is abysmal, then please share what adjectives you'd use for Gibson guitars at twice ... ahem, 3x... the price? lol.
Honestly this is why I’d rather spend that kind of money on a “premium” offering from a Korean factory. You get fewer of these issues right out the gate.