Hello, Is it possible to monitor the electric current of each motor of a FANUC CRX 10iA/L and use that data as input for the code? I plan to use this information to stop the robot's movement when it makes contact with a workpiece. Then I can activate the "stop code" to halt the robot and subsequently activate the "gripper on" to pick up the workpiece. Do you have any ideas for improving this stop-and-pick-up process? I would greatly appreciate it if we could discuss this further. 1. How to detect the workpiece 2. How to stop the robot after detection 3. How to proceed to the next step Thank you.
Hi Thanks for the very clear explanation. I am a videographer that have a kuka robot for the video camera. I would like to link between the robot points timing and external focus motor. Is it possible? and how do I get the timing info of the robot movements? And if you can please shar this info with a video? thanks
@@FutureRoboticsChannel Hi! Thank you for your reply. My bad. I remembered I watched your videos to learn about Fanuc robots a year ago and saw there were videos about another robot, too. I thought it was ABB's, I guess I was wrong. I'm glad to see those Kuka one's, too. I work in an industry where all brands of welding robots can be present. Your videos are really helpful. Thank you again!
@@FutureRoboticsChannel Yes, it's a lot of fun! That's a great question. As my educational background and also hobby are computer programming oriented, KUKA and ABB robots seem to be the ones I'd like the most, however I don't have much experience with those as I work in Japan and they aren't used here. My very short experience with KUKA robots showed me their teach pendant is probably the one I'd like the most, unlike the ABB one which I'm not fond of because of the small screen that makes it hard to program. Your KUKA videos will come in handy if I have to support clients in other Asian countries. Besides my preferences, I mainly use FANUC and YASKAWA robots which are great, too. I'm also exposed to OTC DAIHEN, KAWASAKI and KOBELCO robots.
Thanks a lot for your videos, please, How can I check a condition and stop at the point or do an aproximation mouvement depending on the condition. if anyone else can help will be great!
Hi, can you make a circle by using "Lin" motion commands in Kuka robot? If yes, how many motion points are required (points approximately)? To make a circle of 50 mm radius
After long time...... Thanks for video
Thanks for waiting !
Smooth explanation.thank you !
Thanks for sharing some of unique contents all over the internet :)
Thanks for your support of robotics knowledge. In future to give a ABB robotics techniques
Thank you for your feedback!
Hello,
Is it possible to monitor the electric current of each motor of a FANUC CRX 10iA/L and use that data as input for the code?
I plan to use this information to stop the robot's movement when it makes contact with a workpiece. Then I can activate the "stop code" to halt the robot and subsequently activate the "gripper on" to pick up the workpiece.
Do you have any ideas for improving this stop-and-pick-up process? I would greatly appreciate it if we could discuss this further.
1. How to detect the workpiece
2. How to stop the robot after detection
3. How to proceed to the next step
Thank you.
contact me at info@f-robotics.com
Thanks for sharing,keep it up
Hi Thanks for the very clear explanation. I am a videographer that have a kuka robot for the video camera. I would like to link between the robot points timing and external focus motor. Is it possible? and how do I get the timing info of the robot movements? And if you can please shar this info with a video? thanks
I'm not quite sure what info do you need. Do you want to know the time that robot needs to travel from point to point ?
Can you make a video about spot welding been having some axis limit error we been trying to get rid of
Nice explanation
Great video👍
Thank you for the explanations! Is your hand ok? 🙂
Thanks for asking, yes the hand is ok, it was from a bicycle accident, all good now just the scars left 🙂
thank you very much for your clips . They are very helpful.
Can u make some clips about Safety configuration of KUKA.
Hi. I have a question unrelated to this video. Didn't you use to have videos about ABB robots on your channel? Why are they gone? Thank you!
I have 1 video where I explain "how to jog a robot" and there is FANUC, KUKA and ABB, but I haven't made any ABB videos yet 🙂
@@FutureRoboticsChannel Hi! Thank you for your reply. My bad. I remembered I watched your videos to learn about Fanuc robots a year ago and saw there were videos about another robot, too. I thought it was ABB's, I guess I was wrong. I'm glad to see those Kuka one's, too. I work in an industry where all brands of welding robots can be present. Your videos are really helpful. Thank you again!
@@pingmetal Thank you for the kind words. I hope you are having a lot of fun with programming those!
Do you have any preferred brand of the robots ?
@@FutureRoboticsChannel Yes, it's a lot of fun! That's a great question. As my educational background and also hobby are computer programming oriented, KUKA and ABB robots seem to be the ones I'd like the most, however I don't have much experience with those as I work in Japan and they aren't used here. My very short experience with KUKA robots showed me their teach pendant is probably the one I'd like the most, unlike the ABB one which I'm not fond of because of the small screen that makes it hard to program. Your KUKA videos will come in handy if I have to support clients in other Asian countries. Besides my preferences, I mainly use FANUC and YASKAWA robots which are great, too. I'm also exposed to OTC DAIHEN, KAWASAKI and KOBELCO robots.
Thanks a lot for your videos, please, How can I check a condition and stop at the point or do an aproximation mouvement depending on the condition. if anyone else can help will be great!
You can use WAIT logic
Please continue sir
Please to use workspace in KUKA with out put and in put signal, please share your vedio on space function,
Thank you for the videos...when circular motions and the splines motions? your videos are very interesting!!!
Good video and better explanation... waiting the circular and splines motions too!
Sir what is the name of the simulation software that you are using in the video
OfficeLite and KUKASim
Please make some videos on abb .
Please make a video how to copy a program or use of duplicate function .
Hi, can you make a circle by using "Lin" motion commands in Kuka robot? If yes, how many motion points are required (points approximately)? To make a circle of 50 mm radius
I have never tried making a circle using LIN motion, you should use CIRC motion.
Yes we can do it by giving 10 points with 5mm distance between them.
How to use duplicate function in src and data files also.
All right, added onto my list
what is software name?
OfficeLite and KUKA Sim
@@FutureRoboticsChannel thanks bro.
Any crose online learning from your chanal
Not yet, but I'm working on it
what color is your bugatti?