Kawasaki Z1000 (2010-2013) Bi-LED retrofit custom DIY headlight light upgrade kit

The new and improved bi-LED headlight upgrade kit for the Kawasaki Z1000 with 2x Aharon Bi-LED projectors can be bought here;
retrofitlab.co...
This Kawasaki Z1000 retrofit kit contains everything you need to convert your halogen setup into a powerful Bi-LED projector headlight. The standard lighting of the Z1000 is not really good, or maybe we can just say dangerous? And then only 1 side is lit, which does not really benefit the looks of this cool bike. These are aspects that we have taken into account with the design of our custom upgrade kit.
The light output is greatly improved by the use of Bi-LED technology. But also because with the double projectors you have 2x low beam and 2x high beam. So both lamps are on, which greatly improves the output ánd looks!
For a picture of the light output, check our website.
𝗔𝗱𝘃𝗮𝗻𝘁𝗮𝗴𝗲𝘀 𝗼𝗳 𝗮 𝗕𝗶-led 𝗽𝗿𝗼𝗷𝗲𝗰𝘁𝗼𝗿 𝗿𝗲𝘁𝗿𝗼𝗳𝗶𝘁 𝗸𝗶𝘁
• Much better light output
• Double low beam
• Double high beam
• No glare
• Awesome look
In comparison with HID/xenon
• less strain on the electrical system
• easier to install, no bulky ballasts that are hard to mount out of sight
• no start-up time
𝗧𝗵𝗶𝘀 𝗸𝗶𝘁 𝘄𝗶𝗹𝗹 𝗳𝗶𝘁 𝗼𝗻:
• Z1000 (2010-2013)
Our kits don't have an ECE approval and are not meant to be used on public roads.
#Kawasaki #Z1000 #kawasakiz #kawasakibikes #kawasakibike
#ninja #kawasakiznation #kawasakizclub
#Aharon #Retrofit #retrofitlab #DIY #Upgrade #Headlight #lighting #HID #Retrofit #LED #custom #improvement #light #how-to #instructions
#motorcycle #bikersofinstagram #nakedbike #sportbike #motorcycle #bikelife
#universalbikers #bikestagram

[@traffic8829]

That is a lot of work...
Including the fairing removal

[@Retrofitlab]

It is, but we promise you it's worth it ;-)

[@rosariofragola7011]

Hi dear, I purchased this kit some time ago. May I know, is it possible to know how much time and power is needed to melt the silicone well? My hot air gun has 3 power modes.

[@Retrofitlab]

When a large cardboard box and heatgun is used: Make sure that the hot air of the heatgun does not blow directly to the headlight, place the headlight on small elevations so that the air can circulate properly through the box. We use a setting of 300 Degrees Celsius for 12-18 minutes / 1st lowest setting, depending on the size of the headlight. Don't use a high setting, better safe than sorry :-)

[@MastroZeR0]

Are these road homologated?

[@agq1973]

For BMW C 650 GT?

[@mino3725]

어디서 구매할수있나요?

[@Retrofitlab]

retrofitlab.com/products/kawasaki-z1000-10-13-bi-led-headlight-lighting-upgrade-kit