Husqvarna SM/WR 125 Project Story
Вставка
- Опубліковано 4 січ 2016
- Tässä olis video, joka kertoo vähä hussen tarinaa. Toivottavasti piditte ja saa tilaa kanava!
Musiikki:
The White Panda - Say No Diggity ODESZA // Blackstreet
• The White Panda - Say ...
Radical Something - Step Right Up
• Radical Something - "S...
P.L - In The Zone
• Video - Авто та транспорт
Tänää vasta tajusin että tää legenda husse onki mun nimissä :D hyvin toimii ja hieno on vieläki
👍
Paljolla ostit
toimiikos vielä
snateri83 empä usqo
@@Aapo88 Miks ei toimis?
just great stuff keep on doin what u do..!
good job now i know what to tunning on my Husqvarna 2005
The fucks wrong with the music?
love it :D
+haddi Thanks! :)
Sick bike dude! Did 160 tire fit right on original rim?
what a beautiful bike
GREAT VID!
what did you do with the tps from the carb? or did you not bother with it in the end ?, can you tell me the stock carb set up you ran at first? having trouble with myn at the moment bogging and struggling to get in to the powerband
Thnaks
sick bike tho
I know the video is old but do you know how to adjust the exhaust valve?
best video ever
no lol
good job bud!
what jet did u have in the 28mm dellorto carburetor before u changed it to keihin?
Subailuu meni, itekki tossa omaa husseani projektoin nii mukava nähä uusia projekteja ku kaikki videot kahlattu läpi :D!
+Nytrasahti Jep! :D
Hey that’s a really nice video love it could you tell me the spacer for the cylinder does it go on top or on the bottom
You’re probably not going to answer but was it easy to install the koso speedometer? What did you have to do
Helvetin hyvä video jos musiikkien sohlausta ei lasketa. Hussen projektointivideoita on muutenki harvas, kiitän!
+Mopopoxi Kiitos! :D Ja joo noi musiikit oli aluks normaalisti, mutta youtuben kautta säädin jtn musiikkijuttuja ja tuli tollane puurolaatu toho loppuu...
Braaap ;-)
Hey! I love how clean the bike looks! Good job! I have a question. What was the fuel usage (liters per 100km) after putting on the new carb, and what was the fuel usage after all these other mods? I am thinking between an EXC and an SMS. The SMS is cheaper both to buy and to use, but the EXC is more fun :(.
PolandGamerPL If you tune the Husqvarna it will surely be just as fun as a EXC :)
Which website did you buy the parts off?
A really nice video,where did you buy all the parts?
What are these Numbers on your Renthal fatbar and how did you do that?
That engine looked great just the crank was all used up
how does the wre wheels fit did you have any problems
Subasin :3
nice :) #huskyarmy
+2WheelsPower #HusQ ;)
+HuVx Gt Ai, kiitos! :)
+HuVx Gt En myönnä ;)
Heyy, where did you send parts from? Plzz
Oon myöhässä mutta oon justiin projektoimas mopoa nii piisaakohan koko koneeseen 1m bensaletkua vai pitääkö ostaa 2m?
Hieno derpi
Where did u buy the exhaust?
Please make a video how you painted your rims
Im making the same bike right now hopefully it goes well😅 could you maybe link me some parts😀
The bike looks awesome! How many hp at the end? Subbed and liked please make more videos
+SomeRiderGuy Thanks! I haven't tested how many hp.. =D
NeevilStunt How long did it take you to get where you are now in stunting? I'm really enjoying your videos so far :D You should make more stunt videos
+SomeRiderGuy Umm, i started 1,5 years ago with my moped :p
Where did you find a new WR cylinder? Here on italy it's impossible to buy a new one.
Nice bike btw
Giandomenico Galante HTM has WR cylinders
really sick! does the paint on the rims stay even after a long time?
+exan #1.5k I believe that the paint is very good, but it depends from the painter... :D This was the first time i used paint spray gun so im not sure, but its still in pretty good condition! :)
+NeevilStunt alright, thank you! :D
8:20 Säterin suora o hyvä ja Valkeakoski o paras
complimenti da roma !
lorenzo monopoli aoo
Lorenzo Brunello dimmi ahaha
lorenzo monopoli finalmente un italiano sotto sti video haha
Lorenzo Brunello ahahahahah tutta la vitaa frateee' forte passione motard !!!!
teitkö mitä pohjatöitä ku maalasit vanteet?
Hi any help on how I could purchase a new engine for my bike or what other bikes engine would work perfectly well with my bike . It's a husqvarna wr 125
Emmanuel Afful The Husqvarna WR already has a good engine, but i guess Suzuki RM or Husqvarna CR. Why do you need a different engine?
8:16 näyttää että kytkin ois iha pohjassa
Kytkin luistaa :DD
@@salonen4244 mitä sä selität?
@@lartza5624 läppäläppå
Näytti hiuka silt :D
En yhtää ihmettelis ku husse kuitenki kyseessä
hmmm mulle ainaki poliisi sanoi että nappularenkaat ei riitä talveksi vaan pitää olla iha nastarenkaat / talvirenkaat , mut toki saatte tehdä mitä haluatte , btw talvella on mukava ajaa kun on hyvät ja laadukkaat talvirenkaat joissa on myös nastat .
i have a question for the carb
has it an oil connection or do you have to drive mixed? and what did you do with the t.p.s. sensor?
Tobias Mes probably mixed. its common on these bikes.
almost every 2t 125cc owner mixes the oil with the gas
did u mean freeze the bearings and and heat the case becaus if u did as i sayes in the video it would get really hard to fit them together :)
Where did you buy the grips for the handle? plz answer, really need new grips. In that case, can you link the webb site
+Sebastian Olsen I bought them from a shop in Finland, but you can find them from here for example, (link below)
www.husqvarna-motorcycles.nl/accessoires/show/394/
thx :D
What size supermoto wheels ?
how much money did you spend?
Did you use the rear fender of cr 125?
wr/cr 125
millä värikoodilla maalasit vanteet?
when The magnetos wedge broke, did it still Work or did it missfire?
It worked, but not good. Highest speed was something like 110km/h when the wedge was broken. With new wedge it was around 125km/h.
what sproket size? front and back
Where did you buy those husqvarna throttles?
Francesco Fata Worldwide husqvarna shop
How many HP has Husky
Супер)
millaane ruisku tuo on?
Hi where did you get those grips?
Ralf Kasepuu chek aliexpress and ebay
how fast are it
onko vakio rieju ?
very nice englesh skill talk!1
+swagsnickers =D
How much does it cost? :D
Song?
how tall are u ?
Mitkä välit sul on tossa ja oliko iso ero kun vaihoit rinon depiin ja laitot v-forcet kun itellä ei löydy yhtään alavääntöä kun on rinon putkisto ja 38mm tm kaasari wr imuilla ja 14-45 välit niin pitää piikillä nostaa nimittäin muuten ei lähe
+martsa koskinen Ihan vakiovälit on. Ei ollu tosiaan ku tyhjä vakioputki, jota oli hitsailtu monesti nii ei se kulkenukkaa sil juurikaa nii siihe putkee verrattuna depin paisari toi paljo enemmä tehoo. Ei mullaka ollu enne alavääntöi kun oli toi pyttykoro, joka vei ne vikatkin alaväännöt, mutta tuo wr sylinteri toi niitä perkeleesti, vaikka pa-laipat on ylhäälle lukittu...
nättiä :D itellä katulaiska tt-setillä, ni mitä viriä suosittelet laittaan ku tehot loppuu?Oliko suuri ero isommassa kaasarissa ja vfroceissa?Vai kannattaako samalla hankkia toi wr pyttykin?
wr sylkkää, vhm kansi, vforcet, 38mm tai 40 tai 39mm keihin, jotai putkee, wr imut, sähköt, cr staattori.
Fires Fury halvemalla vaa Bud racing kansi ja wr imut ja vforce imut
@@marjamix Vitun tyhmä😂 "vforce IMUT"
@@kx3847 No sori piti laittaa läpät oh yeah yeah
@@marjamix Oh yeah yeah
Where did you learn to do all this? I would buy a bike soon and always wanted to do this but I dont know much about it. and Im scared to take something a part and not get it back again :p :D
+ItsRazer™ Official I learned by doing it =D My first bike was 50cc Derbi and i learned alot from that, i opened it's engine aswell. Just take some pictures, if you dont remember and you can always use the explode pictures from internet.
+NeevilStunt Ahh niice! I have a china cross haha and maybe i should do it with that because it is not that expensive :P haha but yu, Take picture is always great!! Doo you have som tips to me if i should try this? :D
+ItsRazer™ Official Ummh, that china cross is probably 4-stroke? I don't rly recommend to open the engine atleast, but yeah go for it. :D 2-stroke engines are easier to rebuild.
+NeevilStunt haha oh yes it is a 4 stroke :P but i mean like if i buy a Husqvarna that works fine and motor work but i want to Paint the frame etc. because i want it to look cooler! that is not that hard is it? but i have newer have done something like that before :P and i am a little bit scare if i can do it haha i am like 15/16 years old so i dont think that wil be a problem but ye :3 but i probably will buy a SMR or a 4-Stroke Husqvarna :3
+ItsRazer™ Official Go for it! :)
How much money u spent on the bike?
How much money u spent on all other parts??
The bike cost me around 1550€, but i used 3500-4000€ on the parts. Actually i first fixed the engine, but then i decided to buy WR Cylinder and piston so it cost me alot.
Toiko tuo kaasarin suurennus ja v-forcet paljonkin tehoa lisää aikaisempaan verrattuna? Mietin vain kun itsellä tällähetkellä fmf kokoränni ja tt-setti kasarissa ja kaipailisin vähän lisätehoa..
+Kampelaaa No en oikeen osaa sanoo kun ostin ton Keihin PWK 36 ja vforcet ennen kun laitoin teharin kiinni ni en kokeillu sitä teharia vakiokaasaril tt setin kaa... mutta siis kyllähän se tehoa tuo tietysti
Respect men!Nice bike.I got sm125 2007.2 Months ago,in 3 gear full speed engine stops and i try to start the engine but kickstarter dont have compression.Do you have any idea whats hapen with my bike? Sorry for bad eng. :)
+Kristijan Kristijan It's broken probably :D Open the engine and check...
Now this comment doesn't even matter coz it's like 2 years later and u probably don't even have the bike anymore let alone broken but the engine seized ;^D
what's that handle grip's name?
+Dadda Just normal grip's with Husqvarna logo. There's a link below where u can buy them.
www.husqvarna-motorcycles.nl/accessoires/show/394/
Soon i will make my driver's lisence to 15HP(A1 called in my country) i was thinking KTM EXC 125 or Husqvarna WRE/SM 125.
You have inspired me for Husky i was also Thinking about Aprilia SX/RX 125 They are all very good bikes but i like Husky the most.
Well its all about when i make lisence which is going to be for sale.
Slovenia is small country so there is not much good bikes for sale:( BTW be careful when you do stunts!!
You could get these 2-strokes up to 30-35hp ;)
I'd recommend Husqvarna WR 125 or KTM EXC 125, i prefer Husqvarna WR. In my case, you shouldn't buy Husqvarna SM 125, because you will notice soon after buying it that you want more power and then all your money goes to parts and you can't get the money back when you sell it.
NeevilStunt man that was my old e-mail account, now i have a Street legal Honda CR 125 2003 SM, and when i was buying a bike there was a clapped exc 125 05 and a aprilia rx 125 2008 but the engine on 125 2t aprilias (rotax122) likes to blow up, so fuck that, i am realy happy with my purchase i just don't like the fact it has 5 gears and it doesnt have a speedometer, and in the paper's it says 90km/h its top speed, yeah right😂😂 with 13-40 gearing it goes like 125-130 if im not mistaken cuz speedo doesn't work(original from factory without speedo)
Teippaukset menny hienosti :D eikös sm keulassa ole ihan suorat putket? :D omaa wr300 keulaa en edes aijo yrittää teipata kun ei ole tasapaksut :)
Millasta maalia käytit esmerkis rungon maalaukseen, kun isäukolla on kunnon autoruisku, että ois mahollista tuo oma A2:sen suihkutella tuossa ens talven aikana ennen kun saa kortin ja siirtyy pyörä mettästä tielle?
Näköjään ihan motonetin pohjamaalit ainakin lyöty alle ensin.
Ainiiin ja laitoitko lakkaa?
mikä nopeus mittari sulla tässä on ?
+jjuhhooz Koso:n Db-01r
miten laitoit pa säätimen toimimaan kaasarin vaihdon jälkeen vai laitoitko ees ollenkaan
Ei ollut pa säädin toiminnassa, tais olla rikki jos oikein muistan.
When are you gonna make some more stunt videos? :(
Soon, i just don't have space in my computer so i need to buy more, i've already recorded some new clips with my KTM...
ktm?? new bike?
Yes, KTM EXC 125 2011
What year is this husqvarna? and where do you buy all the parts, can you put some links in the desc?
+NeevilStunt Jotai proju/rakennus videoo kotkast?
miten hyvin tollane spray maali pitäny, alkoko rapistuu?
+LeDe Siis pohjamaali oli spray, mutta ruiskulla vedin pintamaalin
Excuse me, but this bike has got a Electronic ignition ??
nickpcchanel 1™ no, only kick start
No, you have to Make the spark yourself from 2 pieces of metal everytime you go riding
nickpcchanel 1™ im a late respoder but do you realise that every bike has electric ignition
Hey man very nice bike i have to say. Do you recommend this bike for people that are not that tall ? ;) Someone said that hr is 1,65 m tall and can reach the ground with 1 foot perfectly. I am 1,65m too but im not too sure about what he said. Can you guess how tall i have to be to ride this Husky ? ;)
+EzzEGame Its enough :D im like 170 atm.
+NeevilStunt haha ok thank you mate ! ;D
im 185 :DD
+Tony TheGamer im batman
You have the link of the fmf exhaust or the exact model? Thx
Tai olla kortiton kesäkuu "D
what are the mirros :D ?
You can buy them from Ebay if i remember right.
how much hp ?
Da Luke cca 35hp
No Micro indicators? Btw your bike is fucking nice
+Felix Ruppert I like the bigger ones =D, and thanks, much appreciated! :)
Mikä on ton punasen värikoodi?
Toni punanen
Menikö tuo wr pytty suoraa sm??
menee
Kaikki wre/wr/cr menee
Sakari M k
smh you just used the hammer in the inner ring on the bearing.. -.-
mikä biisi ?
Eka o moon light i want some
mitkä välit sul oli tos ja oot varmasti sanonu jolleki mut ois jees jos jaksaisit vastata
Ihan vakio välit tais olla, onkohan ne nyt 13-49 tai jotain sinne päin. Olis saanu olla kyl pidemmät välit kun loppu vähän vaihteet kesken noilla tehoilla...
sää oot smcmssä koska oon tilannu niitten kanavan ja sun lokarissa oli smc tarra :D
Niin oonki
+NeevilStunt ois kiva itekki ollaa smceessä ku mulla on valkeakoskelle aikalyhyt matka lempäälästä:) mut ei oo vielä mopoo mutta mönkiä on ja en siltikään voitulla koska oon vasta 11v:) millon uus video
lempäälä :p
lehmä 606 Ei pahalla mutta miks ne ottas jonku 11v lapsen mukaan niiden juttuun....
Mäntsä Äläs nyt ole tollanen hänhän sano, että olis kiva olla mukana, mutta olen vain 11 ihan asiallinen junnu.
How much did the bike cost when you bought it?
+ThunderBoltProject 1550€, but i've used more than 3000€ on the bike...
+NeevilStunt it looks very good how much kilometers did it have?
+ThunderBoltProject It was something ~20 000
+NeevilStunt how in gods name did you get it for that price ? In Germany decent ones are at least 3000 or even more ... :
+PaniniWM Those SM husqvarnas are pretty cheap in Finland..
where did u buy the exhaust, in Finland what website?
UnKnownUser As you can see the pipe is dented, he buyed used pipe
Mahtoko tää olla Vaasasta lähtösin? =D
+cRUDYH Itse en ainakaan Vaasasta hakenut tätä.
Hey dude i like your bulid and have some questions can you help?
Bruh u are 3 years late
haittaakze bruh his chanel is still active
@@2strokebro75 hes not gonna respond...
haittaakze worth a try i need some help i don’t know what’s your problem
@@2strokebro75 well whats ur problem?
How old are you?
19
#isimaksaa
Vitut
Käytitkö ruiskuu ku maalasit vanteet ? Vai suoraa spray kannust maalasit ? Ja onko hyvi kestäny maali ? Pesut yms?
+NHLSkiller Spraylla pohjamaali ja ruiskulla pintamaali, iha hyvi kestäny...
Check out my husky 125 supermoto story
mistä tanko hommattu?
+Saku Leivo En ole itse hommannut, joku Timeless fatbari tuo vissiin on
Voisko joku kertoo mihi momenttiin kannen pultit tulee
Joona Sinkko 1
Onks tää viä sul ja mikä oli reknro
jepakka ei oo
Osaisikko yhtää sanoo kauan tos projektis meni
Paljonko maksoit tuosta raadosta?